sr20det in a b15 sentra....can it be done?
08-21-2007 | 01:32 PM
#1
Thread Starter
~~ Hardcore Newb ~~
Joined: Aug 2007
Posts: 6
From: Hamilton
Rep Power: 0 
sr20det in a b15 sentra....can it be done?
+I have a 2001 Sentra with an sr20de motor (SE). I was wondering if anyone has done the sr20det swap before, and if i could use the sr20de transaxle with the sr20det block?
if anyone has info on this swap, pls let me know what i'm in for and what to expect.......thnx
if anyone has info on this swap, pls let me know what i'm in for and what to expect.......thnx
09-02-2007 | 05:28 PM
#2
~~ Hardcore Newb ~~
Joined: Dec 2006
Posts: 32
From: Toronto (North York)
Rep Power: 654
the SR20DE transaxle is compatible with the FWD SR20DET.
Everything will bolt in, but thats about it. THere is alot of wiring that has to be done to make this swap functional. Also, you will need to re-do the exhaust from the turbo hotside to your factory exuast if you wish to retain your old exhaust. Hower it is well advised that you scrap your old exhaust in favour of a 3-inch setup, or at the very least a 2.5.
PM me if you need more info
Everything will bolt in, but thats about it. THere is alot of wiring that has to be done to make this swap functional. Also, you will need to re-do the exhaust from the turbo hotside to your factory exuast if you wish to retain your old exhaust. Hower it is well advised that you scrap your old exhaust in favour of a 3-inch setup, or at the very least a 2.5.
PM me if you need more info
09-02-2007 | 05:55 PM
#3
Average GTcars Poster
Joined: Aug 2007
Posts: 506
From: Ontario, Canada
Rep Power: 639
Im not sure if there are engine mounts for the newer ones, just build up your b15, probably better bang for your buck, but then again i dont know what your buck is like. lol. GL with your choice though!
09-03-2007 | 03:32 PM
#4
Thread Starter
~~ Hardcore Newb ~~
Joined: Aug 2007
Posts: 6
From: Hamilton
Rep Power: 0
Thanx too all for repling. The b15 has 230 000kms on already, so their is no p[oint in building it up.
To flashpoint.... what is the FWD SR20DET from? Is it from the GTI-R? And yeah, I was going with the 3" exhaust. I was expecting to do some wiring and the computer as well. No surpises. But if you can tell some heads up stuff, that be great.
To flashpoint.... what is the FWD SR20DET from? Is it from the GTI-R? And yeah, I was going with the 3" exhaust. I was expecting to do some wiring and the computer as well. No surpises. But if you can tell some heads up stuff, that be great.
09-03-2007 | 08:35 PM
#5
Average GTcars Poster
Joined: Aug 2007
Posts: 506
From: Ontario, Canada
Rep Power: 639
Depends, the japanese version comes from the gtr but the american version comes from a number of cars one being the nissan NX2000. I just moved here so i can't tell you where to get anything. If you have anymore questions pm me.
10-02-2007 | 03:52 PM
#6
~~ Hardcore Newb ~~
Joined: Apr 2005
Posts: 31
From: Barrie
Rep Power: 713
On the DET, you'll need to cut some of the engine "braces" that are moulded right into the block or you won't clear the cross member.
You'll also need an intercooler + piping as well as an ECU.
Putting in a higher flowing fuel pump wouldn't hurt either.
You'll also need an intercooler + piping as well as an ECU.
Putting in a higher flowing fuel pump wouldn't hurt either.
Thread
Thread Starter
Forum
Replies
Last Post
aarongroves103
Motorcycle Section
3
07-05-2007 08:45 AM
timmie4
Cars For Sale
0
05-09-2005 12:41 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)