Having trouble removing - changing - replacing the front rotors on my
2001 Hyundai Santa Fe V6 2.7L 4WD. I believe it is the 16 inch wheels.

Removed the wheel, removed the calipher assemby, removed the two screws
from the rotor (one stripped, a screw extractor got it out, read
hyundaitech and others respond the screws can be left out).

At this point it seems the rotor should be able to come off, but I
can't get it to budge? Am I missing something?

I also removed the large nut in the middle/hub, the one with the codder
pin going through it, but as suspected that did not seem necessary.

I've WD40'ed (well Kroil) it, I tapped in the lug nug bolts a little to
see if that would loosen it up, but nothing.

Any assistance would be greatly appreciated.