Well, my rear power window stopped going 'up and down'. I've worked on
these before (on other cars) and there's essentially a cable that makes it
move. Besides scraping my hands up real bad, and getting all greasy, I was
unable to reattach it.

I've looked in the manuals, but, couldn't find how to do it... Any ideas??

Thanks.

 

It'll depend on what's wrong. The most frequent failure is a broken window
regulator requiring regulator replacement.

 

"hyundaitech" <notpublic@not.public.com> wrote in
news:8689ab1a603776a0179c43dfff34c9d2@localhost.ta lkaboutautos.com:

> It'll depend on what's wrong. The most frequent failure is a broken
> window regulator requiring regulator replacement.
>
>
The cable definitely came off the bottom of the unit. It looks like the
cable I'd use on the brakes of a 10-speed bike. However, it connects on
the side that I can't see.

The motor works fine..

Thanks

 

You'll need a new regulator. The plastic holders on the regulators break,
and then the cable comes off.

 

"hyundaitech" <notpublic@not.public.com> wrote in
news:6e7b9a2ebaa1ddff6a2bcfc0df21baa2@localhost.ta lkaboutautos.com:

> You'll need a new regulator. The plastic holders on the regulators
> break, and then the cable comes off.
>
>

Okay, thanks. When you said 'Regulator', I thought it was something
mechanical, like the motor...