Hyundai-tech: after changing cam shaft sensor, car kicks back before stopping
#1
Guest
Posts: n/a
Hyundai-tech: after changing cam shaft sensor, car kicks back before stopping
Hi,
I have Sonata 99 GLS (V6) and recently replaced cam shaft sensor at a
Hyundai-dealer in Cleveland.
I am having a strange thing. It does not happen all the times.
Sometimes, the engine revs up all of sudden (about 200 rpm more) and
the increased RPM does not settle down.
When this happens, the car kicks back right before stopping. It's like
a hiccup or slamming brake pedal hard (of course I didn't slam the
brake pedal).
The only way to make it go is to turn the engine off. On restarting
the engine, the car runs good.
I've made appointment with the service as they have warranty back up on
their service.
However, I want to know what is really going on here.
Is the newly installed cam shaft sensor mal-functioning?
I have replaced the timing belt about six months ago. If the timing
belt is off by a tooth or two and causing this problem, it should
happen all the times, I guess.
Any suggestions or explanations on this issue is highly appreciated. I
want to fix this problem.
Thanks!
I have Sonata 99 GLS (V6) and recently replaced cam shaft sensor at a
Hyundai-dealer in Cleveland.
I am having a strange thing. It does not happen all the times.
Sometimes, the engine revs up all of sudden (about 200 rpm more) and
the increased RPM does not settle down.
When this happens, the car kicks back right before stopping. It's like
a hiccup or slamming brake pedal hard (of course I didn't slam the
brake pedal).
The only way to make it go is to turn the engine off. On restarting
the engine, the car runs good.
I've made appointment with the service as they have warranty back up on
their service.
However, I want to know what is really going on here.
Is the newly installed cam shaft sensor mal-functioning?
I have replaced the timing belt about six months ago. If the timing
belt is off by a tooth or two and causing this problem, it should
happen all the times, I guess.
Any suggestions or explanations on this issue is highly appreciated. I
want to fix this problem.
Thanks!
#2
Guest
Posts: n/a
Re: Hyundai-tech: after changing cam shaft sensor, car kicks back be
It sounds like there a throttle position sensor issue. If it's reading too
high, the car won't idle down, and the transmission will shift hard when
coming to a stop because the TCM thinks you've got your foot on the gas.
high, the car won't idle down, and the transmission will shift hard when
coming to a stop because the TCM thinks you've got your foot on the gas.
#3
Guest
Posts: n/a
Re: Hyundai-tech: after changing cam shaft sensor, car kicks back be
There is no check engine sign on. If it is a throttle position sensor
issue, do I need to replace the sensor? Or, is it just matter of
setting the throttle sensor?
hyundaitech wrote:
> It sounds like there a throttle position sensor issue. If it's reading too
> high, the car won't idle down, and the transmission will shift hard when
> coming to a stop because the TCM thinks you've got your foot on the gas.
issue, do I need to replace the sensor? Or, is it just matter of
setting the throttle sensor?
hyundaitech wrote:
> It sounds like there a throttle position sensor issue. If it's reading too
> high, the car won't idle down, and the transmission will shift hard when
> coming to a stop because the TCM thinks you've got your foot on the gas.
#4
Guest
Posts: n/a
Re: Hyundai-tech: after changing cam shaft sensor, car kicks bac
After looking in the shop manual, it appears this sensor is adjustable, so
it's possible it's an adjustment issue.
Ideally, when the car isn't idling correctly, you'd check the throttle
position sensor (TPS) reading. Unfortunately, a scan tool is the easiest
way to do this. The scan tool reports a data value of on or off for the
idle state. If you've got your foot of the gas and the idle switch
reading is anything but "on," then the TPS reading is the issue.
Then you'll need to figure out what the issue with the TPS reading is.
Make sure there is slack in the throttle cable. It's possible it's an
adjustment issue, but I really think neither of the above are likely to be
the cause just because you say the problem is intermittent. I suspect the
throttle sensor itself is defective or there's poor contact in the
throttle position sensor connector.
it's possible it's an adjustment issue.
Ideally, when the car isn't idling correctly, you'd check the throttle
position sensor (TPS) reading. Unfortunately, a scan tool is the easiest
way to do this. The scan tool reports a data value of on or off for the
idle state. If you've got your foot of the gas and the idle switch
reading is anything but "on," then the TPS reading is the issue.
Then you'll need to figure out what the issue with the TPS reading is.
Make sure there is slack in the throttle cable. It's possible it's an
adjustment issue, but I really think neither of the above are likely to be
the cause just because you say the problem is intermittent. I suspect the
throttle sensor itself is defective or there's poor contact in the
throttle position sensor connector.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)