The mounting bolts on one wiper pivot has rusted away. I need to
replace the wiper linkage assembly but I do not know how to get it off
the wiper motor. I have loosen the pivot mounts and loosen the wiper
motor mounts. What next?

 

On Fri, 16 Jun 2006 20:42:19 -0400, accent <accent@hotmail.com> wrote:

>The mounting bolts on one wiper pivot has rusted away. I need to
>replace the wiper linkage assembly but I do not know how to get it off
>the wiper motor. I have loosen the pivot mounts and loosen the wiper
>motor mounts. What next?

Next I removed the rubber boot at the motor side of the connecting
rod. It looks like the connecting rod is sandwiched between two nylon
washers with the motor arm bearing.

 

On Fri, 16 Jun 2006 20:42:19 -0400, accent <accent@hotmail.com> wrote:

>The mounting bolts on one wiper pivot has rusted away. I need to
>replace the wiper linkage assembly but I do not know how to get it off
>the wiper motor. I have loosen the pivot mounts and loosen the wiper
>motor mounts. What next?

Next I removed the rubber boot at the motor side of the connecting
rod. It looks like the connecting rod is sandwiched between two nylon
washers with the motor arm bearing.

 

On Fri, 16 Jun 2006 20:42:19 -0400, accent <accent@hotmail.com> wrote:

>The mounting bolts on one wiper pivot has rusted away. I need to
>replace the wiper linkage assembly but I do not know how to get it off
>the wiper motor. I have loosen the pivot mounts and loosen the wiper
>motor mounts. What next?

Next I removed the rubber boot at the motor side of the connecting
rod. It looks like the connecting rod is sandwiched between two nylon
washers with the motor arm bearing.

 

The linkage snaps on/off the motor.

 

The linkage snaps on/off the motor.

 

The linkage snaps on/off the motor.

 

On Sat, 17 Jun 2006 15:41:34 -0400, "hyundaitech"
<notpublic@not.public.com> wrote:

>The linkage snaps on/off the motor.

Do you mean that I just twist the connection rod and this will
separate from the motor arm at the ball joint?

 

On Sat, 17 Jun 2006 15:41:34 -0400, "hyundaitech"
<notpublic@not.public.com> wrote:

>The linkage snaps on/off the motor.

Do you mean that I just twist the connection rod and this will
separate from the motor arm at the ball joint?

 

On Sat, 17 Jun 2006 15:41:34 -0400, "hyundaitech"
<notpublic@not.public.com> wrote:

>The linkage snaps on/off the motor.

Do you mean that I just twist the connection rod and this will
separate from the motor arm at the ball joint?

 

You should be able to just pry it off.

 

You should be able to just pry it off.

 

You should be able to just pry it off.