correct tyre presure
05-28-2008 | 05:53 AM
#2
Guest
Posts: n/a
Re: correct tyre presure
<djs@marion.sa.gov.au> wrote in message
news:8aa8d0bd-08d0-49d4-8b18-2dede15a5ae5@s33g2000pri.googlegroups.com...
> Hi All
> What is the considered the best tyre pressure for a 2000 Excel? The
> manufacturers recommendations differ from the tyre manufacturers
> recommendations.
> Thanks
> David
The car manufacturer know what is best for their cars. For the tyres, are
you looking at the recommended pressure or the maximum pressure imprinted on
the side wall?
05-28-2008 | 08:22 AM
#3
Guest
Posts: n/a
Re: correct tyre presure
djs@marion.sa.gov.au wrote:
> Hi All
> What is the considered the best tyre pressure for a 2000 Excel? The
> manufacturers recommendations differ from the tyre manufacturers
> recommendations.
Although few manufacturers actually spec pressures this way, running 3-4
psi more in the front than in the rear is best with front-drive cars,
since the front tires carry the bulk of the weight. It will also tend to
balance the handling by reducing understeer. IIRC, I ran the tires on my
Excel at 34/30 front/rear.
> Hi All
> What is the considered the best tyre pressure for a 2000 Excel? The
> manufacturers recommendations differ from the tyre manufacturers
> recommendations.
Although few manufacturers actually spec pressures this way, running 3-4
psi more in the front than in the rear is best with front-drive cars,
since the front tires carry the bulk of the weight. It will also tend to
balance the handling by reducing understeer. IIRC, I ran the tires on my
Excel at 34/30 front/rear.
05-28-2008 | 03:24 PM
#4
Guest
Posts: n/a
Re: correct tyre presure
The pressure listed on the tire itself is generally the MAXIMUM pressure,
not to be confused with the recommended pressure.
<djs@marion.sa.gov.au> wrote in message
news:8aa8d0bd-08d0-49d4-8b18-2dede15a5ae5@s33g2000pri.googlegroups.com...
> Hi All
> What is the considered the best tyre pressure for a 2000 Excel? The
> manufacturers recommendations differ from the tyre manufacturers
> recommendations.
> Thanks
> David
not to be confused with the recommended pressure.
<djs@marion.sa.gov.au> wrote in message
news:8aa8d0bd-08d0-49d4-8b18-2dede15a5ae5@s33g2000pri.googlegroups.com...
> Hi All
> What is the considered the best tyre pressure for a 2000 Excel? The
> manufacturers recommendations differ from the tyre manufacturers
> recommendations.
> Thanks
> David
06-04-2008 | 03:16 AM
#5
Guest
Posts: n/a
Re: correct tyre presure
On May 28, 9:22 pm, Brian Nystrom <brian.nyst...@verizon.net> wrote:
> d...@marion.sa.gov.au wrote:
> > Hi All
> > What is the considered the best tyre pressure for a 2000 Excel? The
> > manufacturers recommendations differ from the tyre manufacturers
> > recommendations.
>
> Although few manufacturers actually spec pressures this way, running 3-4
> psi more in the front than in the rear is best with front-drive cars,
> since the front tires carry the bulk of the weight. It will also tend to
> balance the handling by reducing understeer. IIRC, I ran the tires on my
> Excel at 34/30 front/rear.
Thanks all - 4 psi higher in the front tyre is a fair bit but makes
sense. I will try this and see how it goes.
Thanks
David
> d...@marion.sa.gov.au wrote:
> > Hi All
> > What is the considered the best tyre pressure for a 2000 Excel? The
> > manufacturers recommendations differ from the tyre manufacturers
> > recommendations.
>
> Although few manufacturers actually spec pressures this way, running 3-4
> psi more in the front than in the rear is best with front-drive cars,
> since the front tires carry the bulk of the weight. It will also tend to
> balance the handling by reducing understeer. IIRC, I ran the tires on my
> Excel at 34/30 front/rear.
Thanks all - 4 psi higher in the front tyre is a fair bit but makes
sense. I will try this and see how it goes.
Thanks
David
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)