I tried jumping it the lights go on but it won't still start. What can it
be? My car is a Hyundai Elantra. If someone knows anything or what it
could be contact me. Thanks

 

hmmmm does it just turn over?
check the crank shaft postiion sensore....
"dolphins" <luvindolphins38@netscape.net> wrote in message
news:3a21939703c47fc5efb9bf13aa732ba5@localhost.ta lkaboutautos.com...
>I tried jumping it the lights go on but it won't still start. What can it
> be? My car is a Hyundai Elantra. If someone knows anything or what it
> could be contact me. Thanks
>

 

Does your engine crank?

Is this a manual or automatic transmission?

 

On Fri, 4 Mar 2005 16:04:33 -0600, "Jody" <jaaribare@yahoo.com> wrote:

>CAMSHAFT POSITION SENSOR REMOVAL
> 1.. Remove the battery ground cable.
>
> 2.. Remove the camshaft position sensor mounting bolt.
>
> 3.. Pull out the camshaft position sensor from cylinder head.
>
>
> 4.. Check the camshaft position sensor. Refer to FL-CMP sensor.
>
> 5.. After check, securely install the CMP sensor.
>
> SPECIFICATION
> Tightening torque: 8 Nm (80 kg.cm, 6 lb.ft) Min.
>
>
>"dolphins" <luvindolphins38@netscape.net> wrote in message
>news:3a21939703c47fc5efb9bf13aa732ba5@localhost.t alkaboutautos.com...
>>I tried jumping it the lights go on but it won't still start. What can it
>> be? My car is a Hyundai Elantra. If someone knows anything or what it
>> could be contact me. Thanks
>>
>
Don't post binaries in a text newsgroup. I didn't need these crappy
pictures on my hard drive.

 

pics are there for a reason
"NobodyMan" <none@none.net> wrote in message
news:vush215nje0ocek6b1np5s0uq30u22fp2t@4ax.com...
> On Fri, 4 Mar 2005 16:04:33 -0600, "Jody" <jaaribare@yahoo.com> wrote:
>
>>CAMSHAFT POSITION SENSOR REMOVAL
>> 1.. Remove the battery ground cable.
>>
>> 2.. Remove the camshaft position sensor mounting bolt.
>>
>> 3.. Pull out the camshaft position sensor from cylinder head.
>>
>>
>> 4.. Check the camshaft position sensor. Refer to FL-CMP sensor.
>>
>> 5.. After check, securely install the CMP sensor.
>>
>> SPECIFICATION
>> Tightening torque: 8 Nm (80 kg.cm, 6 lb.ft) Min.
>>
>>
>>"dolphins" <luvindolphins38@netscape.net> wrote in message
>>news:3a21939703c47fc5efb9bf13aa732ba5@localhost. talkaboutautos.com...
>>>I tried jumping it the lights go on but it won't still start. What can it
>>> be? My car is a Hyundai Elantra. If someone knows anything or what it
>>> could be contact me. Thanks
>>>
>>
> Don't post binaries in a text newsgroup. I didn't need these crappy
> pictures on my hard drive.
>

 

NobodyMan wrote:
> Don't post binaries in a text newsgroup. I didn't need these crappy
> pictures on my hard drive.

Does your PC have a Delete button? If so, use it and quit whining. He
was trying to help someone with a problem.

Instead of getting indignant, you could have just politely suggested
that he post links to pics in the future, instead of posting the pic to
the newsgroup. See, wasn't that easy?

 

thank you brian for sticking up for me =)
"Brian Nystrom" <brian.nystrom@att.net> wrote in message
news:H4iWd.103619$Th1.2249@bgtnsc04-news.ops.worldnet.att.net...
> NobodyMan wrote:
>> Don't post binaries in a text newsgroup. I didn't need these crappy
>> pictures on my hard drive.
>
> Does your PC have a Delete button? If so, use it and quit whining. He was
> trying to help someone with a problem.
>
> Instead of getting indignant, you could have just politely suggested that
> he post links to pics in the future, instead of posting the pic to the
> newsgroup. See, wasn't that easy?

 

On Sat, 05 Mar 2005 13:01:27 GMT, Brian Nystrom
<brian.nystrom@att.net> wrote:

>NobodyMan wrote:
>> Don't post binaries in a text newsgroup. I didn't need these crappy
>> pictures on my hard drive.
>
>Does your PC have a Delete button? If so, use it and quit whining. He
>was trying to help someone with a problem.

That's not the point. Text groups exclude binaries for a reason.
Many people are still on dialup, and many **gasp** still pay
by-the-minute. Binaries found where they aren't expected slow down
their browsing and cost them money.

>Instead of getting indignant, you could have just politely suggested
>that he post links to pics in the future, instead of posting the pic to
>the newsgroup. See, wasn't that easy?

I've tried polite. It rarely works in today's society, unfortunately.
Anymore, only a rude slap to the face works.

 

slap back atcha
"NobodyMan" <none@none.net> wrote in message
news:alik21puc61md98k71ta9v3beqdooahp0k@4ax.com...
> On Sat, 05 Mar 2005 13:01:27 GMT, Brian Nystrom
> <brian.nystrom@att.net> wrote:
>
>>NobodyMan wrote:
>>> Don't post binaries in a text newsgroup. I didn't need these crappy
>>> pictures on my hard drive.
>>
>>Does your PC have a Delete button? If so, use it and quit whining. He
>>was trying to help someone with a problem.
>
> That's not the point. Text groups exclude binaries for a reason.
> Many people are still on dialup, and many **gasp** still pay
> by-the-minute. Binaries found where they aren't expected slow down
> their browsing and cost them money.
>
>>Instead of getting indignant, you could have just politely suggested
>>that he post links to pics in the future, instead of posting the pic to
>>the newsgroup. See, wasn't that easy?
>
> I've tried polite. It rarely works in today's society, unfortunately.
> Anymore, only a rude slap to the face works.
>

 

im new to this and im about to unsubcribe cause of people like you, all this
because of a 45 kb picture?
cut me some slack man, im just learing how to use these news groups !
"Jody" <jaaribare@yahoo.com> wrote in message
news:0ZrWd.70911$Vf6.1923906@news20.bellglobal.com ...
> slap back atcha
> "NobodyMan" <none@none.net> wrote in message
> news:alik21puc61md98k71ta9v3beqdooahp0k@4ax.com...
>> On Sat, 05 Mar 2005 13:01:27 GMT, Brian Nystrom
>> <brian.nystrom@att.net> wrote:
>>
>>>NobodyMan wrote:
>>>> Don't post binaries in a text newsgroup. I didn't need these crappy
>>>> pictures on my hard drive.
>>>
>>>Does your PC have a Delete button? If so, use it and quit whining. He
>>>was trying to help someone with a problem.
>>
>> That's not the point. Text groups exclude binaries for a reason.
>> Many people are still on dialup, and many **gasp** still pay
>> by-the-minute. Binaries found where they aren't expected slow down
>> their browsing and cost them money.
>>
>>>Instead of getting indignant, you could have just politely suggested
>>>that he post links to pics in the future, instead of posting the pic to
>>>the newsgroup. See, wasn't that easy?
>>
>> I've tried polite. It rarely works in today's society, unfortunately.
>> Anymore, only a rude slap to the face works.
>>
>
>

 

NobodyMan wrote:
> On Sat, 05 Mar 2005 13:01:27 GMT, Brian Nystrom
> <brian.nystrom@att.net> wrote:
>
>
>>NobodyMan wrote:
>>
>>>Don't post binaries in a text newsgroup. I didn't need these crappy
>>>pictures on my hard drive.
>>
>>Does your PC have a Delete button? If so, use it and quit whining. He
>>was trying to help someone with a problem.
>
>
> That's not the point. Text groups exclude binaries for a reason.
> Many people are still on dialup,

I'm one of them. The image was small and didn't cause any delay that I
noticed. It certainly didn't warrant your nasty rebuke.

> and many **gasp** still pay by-the-minute.

Yeah, right. Not likely now that unlimited access is available for
$10/month. Come to think of it, I can't remember the last time I saw an
ISP offering anything less than unlimited access.

> Binaries found where they aren't expected slow down
> their browsing and cost them money.
>
Slow down, yes, but very slightly in this case. Cost money? No.
>
>>Instead of getting indignant, you could have just politely suggested
>>that he post links to pics in the future, instead of posting the pic to
>>the newsgroup. See, wasn't that easy?
>
>
> I've tried polite. It rarely works in today's society, unfortunately.

You haven't tried hard enough. There are a lot of newbies out there that
simply don't know any better and need only to have the rules explained
to them. Coming across as a jerk doesn't help the situation.

> Anymore, only a rude slap to the face works.
>
Well apparently, that doesn't work well either, since you didn't heed my
"slap" to use your Delete button and quit whining, did you?

A bigger problem is people who think that it's OK to be rude on the
internet because they can hide behind cutesie pseudonyms. How can you
expect anyone to respect you or what you have to say when you don't even
have the guts to put your name on your words?

 

On Sun, 06 Mar 2005 12:57:37 GMT, Brian Nystrom
<brian.nystrom@att.net> wrote:

>> and many **gasp** still pay by-the-minute.
>
>Yeah, right. Not likely now that unlimited access is available for
>$10/month. Come to think of it, I can't remember the last time I saw an
>ISP offering anything less than unlimited access.

Maybe here in the US. Remember, however, that USENET is a global
community and many other countries don't have the infrastructure to
offer the great deals we have.

 

You've always got some self appointed guru that has been named the grand
poopah of the group. Browsing usenet newsgroups is not an activity that
excercizes one's sense of frugality.

If I wanted to post a picture that had to do with the problem being
discussed, I would post it and tell the guru to kiss my ***. If it helps
some guy with a problem get it fixed, then that is the point of the
newsgroup to start with.

 

who wrote:
> You've always got some self appointed guru that has been named the grand
> poopah of the group. Browsing usenet newsgroups is not an activity that
> excercizes one's sense of frugality.
>
> If I wanted to post a picture that had to do with the problem being
> discussed, I would post it and tell the guru to kiss my ***. If it helps
> some guy with a problem get it fixed, then that is the point of the
> newsgroup to start with.

Its your god given right to clog up a usenet group with your crap
because you're too lazy or ignorant to aquire some web hosting?

A small usenet group like this is similar to a neighborhood block. If
you're a complete dick chances are when it comes time for you to need
assistance, it'll be much easier for other people to tell you to "go
f--k yourself"....

Its one thing to be a knowledge leech, its another to be an annoying
knowledge leech...

JS

 

Partner, I am not as kind as you. you don't really need to take the U out
of the work to get your point made..

I'll tell you this. I wouldn't want your god-damned help to fix a problem.
You self righteous son of a bitch. I'd rather go to a Hyundai dealer and
pay $300 dollars to change my oil as to give you a drop of sweat off my old
*****. you and the other son of a bitch that first raised hell. If
that is not plain enough, I'll try and explain it again. I'll bet you are
even a ing republican too.