2002 Santa Fe abs/tcs lights stay on
#1
Guest
Posts: n/a
2002 Santa Fe abs/tcs lights stay on
Friday the Santa Fe goes in for servive to correct this problem (I
hope). The service dept. says they are replacing a broken right front
toner wheel. We have also been hearing a metal on metal squeal from what
we think has been the right front of the vehicle. Can a broken toner
wheel cause this sound? The part they ordered was the right front CV
shaft. We have been hearing this sound for the past 6 months and the
warning lights first showed this behavior in August. Now that winter is
here we can sure use the abs.
R. Larkin
hope). The service dept. says they are replacing a broken right front
toner wheel. We have also been hearing a metal on metal squeal from what
we think has been the right front of the vehicle. Can a broken toner
wheel cause this sound? The part they ordered was the right front CV
shaft. We have been hearing this sound for the past 6 months and the
warning lights first showed this behavior in August. Now that winter is
here we can sure use the abs.
R. Larkin
#2
Guest
Posts: n/a
Re: 2002 Santa Fe abs/tcs lights stay on
A broken tone wheel could certainly be rubbing against something else as
the vehicle moves, making such a noise, but if it was occurring prior to
the lamps coming on, I doubt it's causing the noise you hear. Be sure to
let the service facility know about the noise and under what circumstances
it occurs.
the vehicle moves, making such a noise, but if it was occurring prior to
the lamps coming on, I doubt it's causing the noise you hear. Be sure to
let the service facility know about the noise and under what circumstances
it occurs.
#3
Guest
Posts: n/a
Re: 2002 Santa Fe abs/tcs lights stay on
A broken tone wheel could certainly be rubbing against something else as
the vehicle moves, making such a noise, but if it was occurring prior to
the lamps coming on, I doubt it's causing the noise you hear. Be sure to
let the service facility know about the noise and under what circumstances
it occurs.
the vehicle moves, making such a noise, but if it was occurring prior to
the lamps coming on, I doubt it's causing the noise you hear. Be sure to
let the service facility know about the noise and under what circumstances
it occurs.
#4
Guest
Posts: n/a
Re: 2002 Santa Fe abs/tcs lights stay on
Thank you. I've been very detailed in my description of when the noise
occurs, but the service department has yet to hear it. We've even left
the car with them overnight so they can drive it after it has set all
night. They hear nothing. I guess it's just like when I mentioned the
burning smell from the front of the car, but they didn't smell anything
burning, just prior to my alternator burning up.
hyundaitech wrote:
> A broken tone wheel could certainly be rubbing against something else as
> the vehicle moves, making such a noise, but if it was occurring prior to
> the lamps coming on, I doubt it's causing the noise you hear. Be sure to
> let the service facility know about the noise and under what circumstances
> it occurs.
>
occurs, but the service department has yet to hear it. We've even left
the car with them overnight so they can drive it after it has set all
night. They hear nothing. I guess it's just like when I mentioned the
burning smell from the front of the car, but they didn't smell anything
burning, just prior to my alternator burning up.
hyundaitech wrote:
> A broken tone wheel could certainly be rubbing against something else as
> the vehicle moves, making such a noise, but if it was occurring prior to
> the lamps coming on, I doubt it's causing the noise you hear. Be sure to
> let the service facility know about the noise and under what circumstances
> it occurs.
>
#5
Guest
Posts: n/a
Re: 2002 Santa Fe abs/tcs lights stay on
Thank you. I've been very detailed in my description of when the noise
occurs, but the service department has yet to hear it. We've even left
the car with them overnight so they can drive it after it has set all
night. They hear nothing. I guess it's just like when I mentioned the
burning smell from the front of the car, but they didn't smell anything
burning, just prior to my alternator burning up.
hyundaitech wrote:
> A broken tone wheel could certainly be rubbing against something else as
> the vehicle moves, making such a noise, but if it was occurring prior to
> the lamps coming on, I doubt it's causing the noise you hear. Be sure to
> let the service facility know about the noise and under what circumstances
> it occurs.
>
occurs, but the service department has yet to hear it. We've even left
the car with them overnight so they can drive it after it has set all
night. They hear nothing. I guess it's just like when I mentioned the
burning smell from the front of the car, but they didn't smell anything
burning, just prior to my alternator burning up.
hyundaitech wrote:
> A broken tone wheel could certainly be rubbing against something else as
> the vehicle moves, making such a noise, but if it was occurring prior to
> the lamps coming on, I doubt it's causing the noise you hear. Be sure to
> let the service facility know about the noise and under what circumstances
> it occurs.
>
#6
Guest
Posts: n/a
Re: 2002 Santa Fe abs/tcs lights stay on
when I had a problem with the clutch in my 04 Elantra GT.. the service
writer went out with me for a short drive.. he said he felt nothing, it felt
nornal.. couple months later. it still felt like it was releasing then
grabbing then releasing again, so I insisted a mechanic take it out, he
wasnt gone but 2 mins when he came back and said the clutch was shot....
turned out the throughout bearing was bent... I would INSIST that you go
out with a mechanic so he can drive it... service writes often dont know
what they are talking about and sluff ya off.. where the mechanic knows what
to look for...
Pete...
"Richard" <richard147@hotmail.com> wrote in message
news:SvFsf.56204$XC4.44678@twister.nyroc.rr.com...
> Thank you. I've been very detailed in my description of when the noise
> occurs, but the service department has yet to hear it. We've even left the
> car with them overnight so they can drive it after it has set all night.
> They hear nothing. I guess it's just like when I mentioned the burning
> smell from the front of the car, but they didn't smell anything burning,
> just prior to my alternator burning up.
>
> hyundaitech wrote:
>> A broken tone wheel could certainly be rubbing against something else as
>> the vehicle moves, making such a noise, but if it was occurring prior to
>> the lamps coming on, I doubt it's causing the noise you hear. Be sure to
>> let the service facility know about the noise and under what
>> circumstances
>> it occurs.
>>
writer went out with me for a short drive.. he said he felt nothing, it felt
nornal.. couple months later. it still felt like it was releasing then
grabbing then releasing again, so I insisted a mechanic take it out, he
wasnt gone but 2 mins when he came back and said the clutch was shot....
turned out the throughout bearing was bent... I would INSIST that you go
out with a mechanic so he can drive it... service writes often dont know
what they are talking about and sluff ya off.. where the mechanic knows what
to look for...
Pete...
"Richard" <richard147@hotmail.com> wrote in message
news:SvFsf.56204$XC4.44678@twister.nyroc.rr.com...
> Thank you. I've been very detailed in my description of when the noise
> occurs, but the service department has yet to hear it. We've even left the
> car with them overnight so they can drive it after it has set all night.
> They hear nothing. I guess it's just like when I mentioned the burning
> smell from the front of the car, but they didn't smell anything burning,
> just prior to my alternator burning up.
>
> hyundaitech wrote:
>> A broken tone wheel could certainly be rubbing against something else as
>> the vehicle moves, making such a noise, but if it was occurring prior to
>> the lamps coming on, I doubt it's causing the noise you hear. Be sure to
>> let the service facility know about the noise and under what
>> circumstances
>> it occurs.
>>
#7
Guest
Posts: n/a
Re: 2002 Santa Fe abs/tcs lights stay on
when I had a problem with the clutch in my 04 Elantra GT.. the service
writer went out with me for a short drive.. he said he felt nothing, it felt
nornal.. couple months later. it still felt like it was releasing then
grabbing then releasing again, so I insisted a mechanic take it out, he
wasnt gone but 2 mins when he came back and said the clutch was shot....
turned out the throughout bearing was bent... I would INSIST that you go
out with a mechanic so he can drive it... service writes often dont know
what they are talking about and sluff ya off.. where the mechanic knows what
to look for...
Pete...
"Richard" <richard147@hotmail.com> wrote in message
news:SvFsf.56204$XC4.44678@twister.nyroc.rr.com...
> Thank you. I've been very detailed in my description of when the noise
> occurs, but the service department has yet to hear it. We've even left the
> car with them overnight so they can drive it after it has set all night.
> They hear nothing. I guess it's just like when I mentioned the burning
> smell from the front of the car, but they didn't smell anything burning,
> just prior to my alternator burning up.
>
> hyundaitech wrote:
>> A broken tone wheel could certainly be rubbing against something else as
>> the vehicle moves, making such a noise, but if it was occurring prior to
>> the lamps coming on, I doubt it's causing the noise you hear. Be sure to
>> let the service facility know about the noise and under what
>> circumstances
>> it occurs.
>>
writer went out with me for a short drive.. he said he felt nothing, it felt
nornal.. couple months later. it still felt like it was releasing then
grabbing then releasing again, so I insisted a mechanic take it out, he
wasnt gone but 2 mins when he came back and said the clutch was shot....
turned out the throughout bearing was bent... I would INSIST that you go
out with a mechanic so he can drive it... service writes often dont know
what they are talking about and sluff ya off.. where the mechanic knows what
to look for...
Pete...
"Richard" <richard147@hotmail.com> wrote in message
news:SvFsf.56204$XC4.44678@twister.nyroc.rr.com...
> Thank you. I've been very detailed in my description of when the noise
> occurs, but the service department has yet to hear it. We've even left the
> car with them overnight so they can drive it after it has set all night.
> They hear nothing. I guess it's just like when I mentioned the burning
> smell from the front of the car, but they didn't smell anything burning,
> just prior to my alternator burning up.
>
> hyundaitech wrote:
>> A broken tone wheel could certainly be rubbing against something else as
>> the vehicle moves, making such a noise, but if it was occurring prior to
>> the lamps coming on, I doubt it's causing the noise you hear. Be sure to
>> let the service facility know about the noise and under what
>> circumstances
>> it occurs.
>>
#8
Guest
Posts: n/a
Re: 2002 Santa Fe abs/tcs lights stay on
Good advice. Thanks.
Pete & Cindy wrote:
> when I had a problem with the clutch in my 04 Elantra GT.. the service
> writer went out with me for a short drive.. he said he felt nothing, it felt
> nornal.. couple months later. it still felt like it was releasing then
> grabbing then releasing again, so I insisted a mechanic take it out, he
> wasnt gone but 2 mins when he came back and said the clutch was shot....
> turned out the throughout bearing was bent... I would INSIST that you go
> out with a mechanic so he can drive it... service writes often dont know
> what they are talking about and sluff ya off.. where the mechanic knows what
> to look for...
>
> Pete...
>
>
> "Richard" <richard147@hotmail.com> wrote in message
> news:SvFsf.56204$XC4.44678@twister.nyroc.rr.com...
>
>>Thank you. I've been very detailed in my description of when the noise
>>occurs, but the service department has yet to hear it. We've even left the
>>car with them overnight so they can drive it after it has set all night.
>>They hear nothing. I guess it's just like when I mentioned the burning
>>smell from the front of the car, but they didn't smell anything burning,
>>just prior to my alternator burning up.
>>
>>hyundaitech wrote:
>>
>>>A broken tone wheel could certainly be rubbing against something else as
>>>the vehicle moves, making such a noise, but if it was occurring prior to
>>>the lamps coming on, I doubt it's causing the noise you hear. Be sure to
>>>let the service facility know about the noise and under what
>>>circumstances
>>>it occurs.
>>>
>
>
>
Pete & Cindy wrote:
> when I had a problem with the clutch in my 04 Elantra GT.. the service
> writer went out with me for a short drive.. he said he felt nothing, it felt
> nornal.. couple months later. it still felt like it was releasing then
> grabbing then releasing again, so I insisted a mechanic take it out, he
> wasnt gone but 2 mins when he came back and said the clutch was shot....
> turned out the throughout bearing was bent... I would INSIST that you go
> out with a mechanic so he can drive it... service writes often dont know
> what they are talking about and sluff ya off.. where the mechanic knows what
> to look for...
>
> Pete...
>
>
> "Richard" <richard147@hotmail.com> wrote in message
> news:SvFsf.56204$XC4.44678@twister.nyroc.rr.com...
>
>>Thank you. I've been very detailed in my description of when the noise
>>occurs, but the service department has yet to hear it. We've even left the
>>car with them overnight so they can drive it after it has set all night.
>>They hear nothing. I guess it's just like when I mentioned the burning
>>smell from the front of the car, but they didn't smell anything burning,
>>just prior to my alternator burning up.
>>
>>hyundaitech wrote:
>>
>>>A broken tone wheel could certainly be rubbing against something else as
>>>the vehicle moves, making such a noise, but if it was occurring prior to
>>>the lamps coming on, I doubt it's causing the noise you hear. Be sure to
>>>let the service facility know about the noise and under what
>>>circumstances
>>>it occurs.
>>>
>
>
>
#9
Guest
Posts: n/a
Re: 2002 Santa Fe abs/tcs lights stay on
Good advice. Thanks.
Pete & Cindy wrote:
> when I had a problem with the clutch in my 04 Elantra GT.. the service
> writer went out with me for a short drive.. he said he felt nothing, it felt
> nornal.. couple months later. it still felt like it was releasing then
> grabbing then releasing again, so I insisted a mechanic take it out, he
> wasnt gone but 2 mins when he came back and said the clutch was shot....
> turned out the throughout bearing was bent... I would INSIST that you go
> out with a mechanic so he can drive it... service writes often dont know
> what they are talking about and sluff ya off.. where the mechanic knows what
> to look for...
>
> Pete...
>
>
> "Richard" <richard147@hotmail.com> wrote in message
> news:SvFsf.56204$XC4.44678@twister.nyroc.rr.com...
>
>>Thank you. I've been very detailed in my description of when the noise
>>occurs, but the service department has yet to hear it. We've even left the
>>car with them overnight so they can drive it after it has set all night.
>>They hear nothing. I guess it's just like when I mentioned the burning
>>smell from the front of the car, but they didn't smell anything burning,
>>just prior to my alternator burning up.
>>
>>hyundaitech wrote:
>>
>>>A broken tone wheel could certainly be rubbing against something else as
>>>the vehicle moves, making such a noise, but if it was occurring prior to
>>>the lamps coming on, I doubt it's causing the noise you hear. Be sure to
>>>let the service facility know about the noise and under what
>>>circumstances
>>>it occurs.
>>>
>
>
>
Pete & Cindy wrote:
> when I had a problem with the clutch in my 04 Elantra GT.. the service
> writer went out with me for a short drive.. he said he felt nothing, it felt
> nornal.. couple months later. it still felt like it was releasing then
> grabbing then releasing again, so I insisted a mechanic take it out, he
> wasnt gone but 2 mins when he came back and said the clutch was shot....
> turned out the throughout bearing was bent... I would INSIST that you go
> out with a mechanic so he can drive it... service writes often dont know
> what they are talking about and sluff ya off.. where the mechanic knows what
> to look for...
>
> Pete...
>
>
> "Richard" <richard147@hotmail.com> wrote in message
> news:SvFsf.56204$XC4.44678@twister.nyroc.rr.com...
>
>>Thank you. I've been very detailed in my description of when the noise
>>occurs, but the service department has yet to hear it. We've even left the
>>car with them overnight so they can drive it after it has set all night.
>>They hear nothing. I guess it's just like when I mentioned the burning
>>smell from the front of the car, but they didn't smell anything burning,
>>just prior to my alternator burning up.
>>
>>hyundaitech wrote:
>>
>>>A broken tone wheel could certainly be rubbing against something else as
>>>the vehicle moves, making such a noise, but if it was occurring prior to
>>>the lamps coming on, I doubt it's causing the noise you hear. Be sure to
>>>let the service facility know about the noise and under what
>>>circumstances
>>>it occurs.
>>>
>
>
>
Thread
Thread Starter
Forum
Replies
Last Post
martin.stephenson@gmail.com
Hyundai Mailing List
5
08-06-2006 06:38 AM
martin.stephenson@gmail.com
Hyundai Mailing List
0
07-29-2006 04:48 AM
martin.stephenson@gmail.com
Hyundai Mailing List
0
07-29-2006 04:48 AM
Richard
Hyundai Mailing List
1
11-15-2005 12:41 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)