The PCV valve hose had a small crack in it, I didn’t notice anything
until the car started driving funny. (Pressing on the gas and getting
no response, a little rattling plus smoke from the exhaust.)

When I changed the hose, I noticed there was oil dripping from inside.
After further inspection, the air filter was soaked with oil and I had
a pool of oil in the air filter container.

I changed the PCV valve, and replaced the air filter while cleaning
the air flow pipes and filter container.

The next morning, I drove to the nearest gas station to get a couple
quarts of oil. After putting the oil in, the car started acting the
same way it did before I changed the hose. Plus a lot more smoke was
coming from the exhaust.

Has anyone had his type of trouble or know what I need to do to get
the car running again?

Thanks in advance.

--
Posted using the http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.autoforumz.com/Hyundai-20...ict107864.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.autoforumz.com/eform.php?p=503560

 

Is you oil overfilled? If so, how much?
Recheck your new air filter and the air cleaner box. There may have been
oil in the throttle body and intake that had yet to be removed. I'd
recommend cleaning your throttle body with carb cleaner or similar
chemical, but there may be more to investigate if you don't find anything
significant.

Do you know how to test your pcv valve to verify proper operation? If so,
check it. I've seen a couple new aftermarket ones that didn't work
properly. Check to make sure the pcv port on the intake manifold isn't
clogged. And check the breather hose to be sure it isn't blocked or
clogged.

 

"hyundaitech2" wrote:
> Is you oil overfilled? If so, how much?
> Recheck your new air filter and the air cleaner box. There may
> have been
> oil in the throttle body and intake that had yet to be
> removed. I'd
> recommend cleaning your throttle body with carb cleaner or
> similar
> chemical, but there may be more to investigate if you don't
> find anything
> significant.
>
> Do you know how to test your pcv valve to verify proper
> operation? If so,
> check it. I've seen a couple new aftermarket ones that didn't
> work
> properly. Check to make sure the pcv port on the intake
> manifold isn't
> clogged. And check the breather hose to be sure it isn't
> blocked or
> clogged.

Well, yes the oil -was- overfilled, about two quarts. I busted my oil
pan drain plug a couple months ago and just put in a rubber universal
one from advance.

It became routine to add a quart or two every 2-3 weeks. After I put
in the new pcv valve, I noticed I wasn’t dripping oil anymore. On my
way to work, I added two more quarts. That’s when it really started to
smoke.

Anyway, I got a new plug from the dealer and drained the excess oil.
Car runs fine now... go figure.

--
Posted using the http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.autoforumz.com/Hyundai-20...ict107864.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.autoforumz.com/eform.php?p=510712