Washer reservoir repair or replacement ?
09-18-2003 | 06:54 PM
#1
Guest
Posts: n/a
Washer reservoir repair or replacement ?
I have a 96 Civic and the windshield washers have lost pressure and barely
wet the windshield. I looked under the hood and all the hoses are tight with
no apparent leakage that I can see.
Thus I figure it's the motor - which I believe is attached or part of the
reservoir. Problem is I am insure how to get to it - is it a big job ?
I guess Honda sells the combo: reservoir & motor...
I have the Haynes guide, but there's nothing at all on this..
Any ideas ?
Best regards,
DS
wet the windshield. I looked under the hood and all the hoses are tight with
no apparent leakage that I can see.
Thus I figure it's the motor - which I believe is attached or part of the
reservoir. Problem is I am insure how to get to it - is it a big job ?
I guess Honda sells the combo: reservoir & motor...
I have the Haynes guide, but there's nothing at all on this..
Any ideas ?
Best regards,
DS
09-18-2003 | 07:32 PM
#2
Guest
Posts: n/a
Re: Washer reservoir repair or replacement ?
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor -
check all the hoses... unplug, and blow thru em. nozzles also get clogged,
as well as the screen on the pump inlet.
id bet on nozzles
09-18-2003 | 07:32 PM
#3
Guest
Posts: n/a
Re: Washer reservoir repair or replacement ?
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor -
check all the hoses... unplug, and blow thru em. nozzles also get clogged,
as well as the screen on the pump inlet.
id bet on nozzles
09-18-2003 | 07:32 PM
#4
Guest
Posts: n/a
Re: Washer reservoir repair or replacement ?
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor -
check all the hoses... unplug, and blow thru em. nozzles also get clogged,
as well as the screen on the pump inlet.
id bet on nozzles
09-18-2003 | 08:10 PM
#5
Guest
Posts: n/a
Re: Washer reservoir repair or replacement ?
"SoCalMike" <mikein562athotmail@hotmail.com> wrote in message
news:Qfrab.506478$o%2.223602@sccrnsc02...
>
> "DS" <riderbmw@hotmail.com> wrote in message
> news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> > I have a 96 Civic and the windshield washers have lost pressure and
barely
> > wet the windshield. I looked under the hood and all the hoses are tight
> with
> > no apparent leakage that I can see.
> >
> > Thus I figure it's the motor -
>
> check all the hoses... unplug, and blow thru em. nozzles also get clogged,
> as well as the screen on the pump inlet.
>
> id bet on nozzles
Had a similar problem before. Another idea is to check the length of the
hose tubing for any crimping in the line. A clip holding the hose was also
putting a kink in the line. If so, this is an easy and simple fix.
Good luck,
-Dave
09-18-2003 | 08:10 PM
#6
Guest
Posts: n/a
Re: Washer reservoir repair or replacement ?
"SoCalMike" <mikein562athotmail@hotmail.com> wrote in message
news:Qfrab.506478$o%2.223602@sccrnsc02...
>
> "DS" <riderbmw@hotmail.com> wrote in message
> news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> > I have a 96 Civic and the windshield washers have lost pressure and
barely
> > wet the windshield. I looked under the hood and all the hoses are tight
> with
> > no apparent leakage that I can see.
> >
> > Thus I figure it's the motor -
>
> check all the hoses... unplug, and blow thru em. nozzles also get clogged,
> as well as the screen on the pump inlet.
>
> id bet on nozzles
Had a similar problem before. Another idea is to check the length of the
hose tubing for any crimping in the line. A clip holding the hose was also
putting a kink in the line. If so, this is an easy and simple fix.
Good luck,
-Dave
09-18-2003 | 08:10 PM
#7
Guest
Posts: n/a
Re: Washer reservoir repair or replacement ?
"SoCalMike" <mikein562athotmail@hotmail.com> wrote in message
news:Qfrab.506478$o%2.223602@sccrnsc02...
>
> "DS" <riderbmw@hotmail.com> wrote in message
> news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> > I have a 96 Civic and the windshield washers have lost pressure and
barely
> > wet the windshield. I looked under the hood and all the hoses are tight
> with
> > no apparent leakage that I can see.
> >
> > Thus I figure it's the motor -
>
> check all the hoses... unplug, and blow thru em. nozzles also get clogged,
> as well as the screen on the pump inlet.
>
> id bet on nozzles
Had a similar problem before. Another idea is to check the length of the
hose tubing for any crimping in the line. A clip holding the hose was also
putting a kink in the line. If so, this is an easy and simple fix.
Good luck,
-Dave
09-19-2003 | 12:46 AM
#8
Guest
Posts: n/a
Re: Washer reservoir repair or replacement ?
remove left front wheel, remove plastic fender liner,
The washer tank and pump are behind that. The pumps can be replaced by
themselves.
--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor - which I believe is attached or part of the
> reservoir. Problem is I am insure how to get to it - is it a big job ?
>
> I guess Honda sells the combo: reservoir & motor...
>
> I have the Haynes guide, but there's nothing at all on this..
>
> Any ideas ?
>
> Best regards,
>
>
> DS
>
>
The washer tank and pump are behind that. The pumps can be replaced by
themselves.
--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor - which I believe is attached or part of the
> reservoir. Problem is I am insure how to get to it - is it a big job ?
>
> I guess Honda sells the combo: reservoir & motor...
>
> I have the Haynes guide, but there's nothing at all on this..
>
> Any ideas ?
>
> Best regards,
>
>
> DS
>
>
09-19-2003 | 12:46 AM
#9
Guest
Posts: n/a
Re: Washer reservoir repair or replacement ?
remove left front wheel, remove plastic fender liner,
The washer tank and pump are behind that. The pumps can be replaced by
themselves.
--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor - which I believe is attached or part of the
> reservoir. Problem is I am insure how to get to it - is it a big job ?
>
> I guess Honda sells the combo: reservoir & motor...
>
> I have the Haynes guide, but there's nothing at all on this..
>
> Any ideas ?
>
> Best regards,
>
>
> DS
>
>
The washer tank and pump are behind that. The pumps can be replaced by
themselves.
--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor - which I believe is attached or part of the
> reservoir. Problem is I am insure how to get to it - is it a big job ?
>
> I guess Honda sells the combo: reservoir & motor...
>
> I have the Haynes guide, but there's nothing at all on this..
>
> Any ideas ?
>
> Best regards,
>
>
> DS
>
>
09-19-2003 | 12:46 AM
#10
Guest
Posts: n/a
Re: Washer reservoir repair or replacement ?
remove left front wheel, remove plastic fender liner,
The washer tank and pump are behind that. The pumps can be replaced by
themselves.
--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor - which I believe is attached or part of the
> reservoir. Problem is I am insure how to get to it - is it a big job ?
>
> I guess Honda sells the combo: reservoir & motor...
>
> I have the Haynes guide, but there's nothing at all on this..
>
> Any ideas ?
>
> Best regards,
>
>
> DS
>
>
The washer tank and pump are behind that. The pumps can be replaced by
themselves.
--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor - which I believe is attached or part of the
> reservoir. Problem is I am insure how to get to it - is it a big job ?
>
> I guess Honda sells the combo: reservoir & motor...
>
> I have the Haynes guide, but there's nothing at all on this..
>
> Any ideas ?
>
> Best regards,
>
>
> DS
>
>
09-19-2003 | 10:26 AM
#11
Guest
Posts: n/a
Re: Washer reservoir repair or replacement ?
http://www.hondaautomotiveparts.com/...DSHIELD+WASHER
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor - which I believe is attached or part of the
> reservoir. Problem is I am insure how to get to it - is it a big job ?
>
> I guess Honda sells the combo: reservoir & mo
tor...
>
> I have the Haynes guide, but there's nothing at all on this..
>
> Any ideas ?
>
> Best regards,
>
>
> DS
>
>
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor - which I believe is attached or part of the
> reservoir. Problem is I am insure how to get to it - is it a big job ?
>
> I guess Honda sells the combo: reservoir & mo
tor...
>
> I have the Haynes guide, but there's nothing at all on this..
>
> Any ideas ?
>
> Best regards,
>
>
> DS
>
>
09-19-2003 | 10:26 AM
#12
Guest
Posts: n/a
Re: Washer reservoir repair or replacement ?
http://www.hondaautomotiveparts.com/...DSHIELD+WASHER
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor - which I believe is attached or part of the
> reservoir. Problem is I am insure how to get to it - is it a big job ?
>
> I guess Honda sells the combo: reservoir & mo
tor...
>
> I have the Haynes guide, but there's nothing at all on this..
>
> Any ideas ?
>
> Best regards,
>
>
> DS
>
>
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor - which I believe is attached or part of the
> reservoir. Problem is I am insure how to get to it - is it a big job ?
>
> I guess Honda sells the combo: reservoir & mo
tor...
>
> I have the Haynes guide, but there's nothing at all on this..
>
> Any ideas ?
>
> Best regards,
>
>
> DS
>
>
09-19-2003 | 10:26 AM
#13
Guest
Posts: n/a
Re: Washer reservoir repair or replacement ?
http://www.hondaautomotiveparts.com/...DSHIELD+WASHER
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor - which I believe is attached or part of the
> reservoir. Problem is I am insure how to get to it - is it a big job ?
>
> I guess Honda sells the combo: reservoir & mo
tor...
>
> I have the Haynes guide, but there's nothing at all on this..
>
> Any ideas ?
>
> Best regards,
>
>
> DS
>
>
"DS" <riderbmw@hotmail.com> wrote in message
news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> I have a 96 Civic and the windshield washers have lost pressure and barely
> wet the windshield. I looked under the hood and all the hoses are tight
with
> no apparent leakage that I can see.
>
> Thus I figure it's the motor - which I believe is attached or part of the
> reservoir. Problem is I am insure how to get to it - is it a big job ?
>
> I guess Honda sells the combo: reservoir & mo
tor...
>
> I have the Haynes guide, but there's nothing at all on this..
>
> Any ideas ?
>
> Best regards,
>
>
> DS
>
>
09-19-2003 | 11:02 AM
#14
Guest
Posts: n/a
Re: Washer reservoir repair or replacement ?
How does one get to it ? from underneath ? Removing the inner skirt to
see/get to it ?
Txs.
DS
"SoCalMike" <mikein562athotmail@hotmail.com> wrote in message
news:Qfrab.506478$o%2.223602@sccrnsc02...
|
| "DS" <riderbmw@hotmail.com> wrote in message
| news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
| > I have a 96 Civic and the windshield washers have lost pressure and
barely
| > wet the windshield. I looked under the hood and all the hoses are tight
| with
| > no apparent leakage that I can see.
| >
| > Thus I figure it's the motor -
|
| check all the hoses... unplug, and blow thru em. nozzles also get clogged,
| as well as the screen on the pump inlet.
|
| id bet on nozzles
|
|
see/get to it ?
Txs.
DS
"SoCalMike" <mikein562athotmail@hotmail.com> wrote in message
news:Qfrab.506478$o%2.223602@sccrnsc02...
|
| "DS" <riderbmw@hotmail.com> wrote in message
| news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
| > I have a 96 Civic and the windshield washers have lost pressure and
barely
| > wet the windshield. I looked under the hood and all the hoses are tight
| with
| > no apparent leakage that I can see.
| >
| > Thus I figure it's the motor -
|
| check all the hoses... unplug, and blow thru em. nozzles also get clogged,
| as well as the screen on the pump inlet.
|
| id bet on nozzles
|
|
09-19-2003 | 11:02 AM
#15
Guest
Posts: n/a
Re: Washer reservoir repair or replacement ?
How does one get to it ? from underneath ? Removing the inner skirt to
see/get to it ?
Txs.
DS
"SoCalMike" <mikein562athotmail@hotmail.com> wrote in message
news:Qfrab.506478$o%2.223602@sccrnsc02...
|
| "DS" <riderbmw@hotmail.com> wrote in message
| news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
| > I have a 96 Civic and the windshield washers have lost pressure and
barely
| > wet the windshield. I looked under the hood and all the hoses are tight
| with
| > no apparent leakage that I can see.
| >
| > Thus I figure it's the motor -
|
| check all the hoses... unplug, and blow thru em. nozzles also get clogged,
| as well as the screen on the pump inlet.
|
| id bet on nozzles
|
|
see/get to it ?
Txs.
DS
"SoCalMike" <mikein562athotmail@hotmail.com> wrote in message
news:Qfrab.506478$o%2.223602@sccrnsc02...
|
| "DS" <riderbmw@hotmail.com> wrote in message
| news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
| > I have a 96 Civic and the windshield washers have lost pressure and
barely
| > wet the windshield. I looked under the hood and all the hoses are tight
| with
| > no apparent leakage that I can see.
| >
| > Thus I figure it's the motor -
|
| check all the hoses... unplug, and blow thru em. nozzles also get clogged,
| as well as the screen on the pump inlet.
|
| id bet on nozzles
|
|