solution to 2003 Accord rotor problem???
11-28-2003 | 05:30 PM
#31
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
<michelle.oleary@verizon.net> wrote:
>There is a Service Bulletin on the 2003 Accords.
>Check with your local dealer and get them done for free
>
Where can I find this Michelle? Do you have any HTTP for it?
My local dealer tried to shrug responsibility. It would be good to
take this ammo into them.
Thank you,
Jody
<michelle.oleary@verizon.net> wrote:
>There is a Service Bulletin on the 2003 Accords.
>Check with your local dealer and get them done for free
>
Where can I find this Michelle? Do you have any HTTP for it?
My local dealer tried to shrug responsibility. It would be good to
take this ammo into them.
Thank you,
Jody
11-28-2003 | 05:30 PM
#32
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
<michelle.oleary@verizon.net> wrote:
>There is a Service Bulletin on the 2003 Accords.
>Check with your local dealer and get them done for free
>
Where can I find this Michelle? Do you have any HTTP for it?
My local dealer tried to shrug responsibility. It would be good to
take this ammo into them.
Thank you,
Jody
<michelle.oleary@verizon.net> wrote:
>There is a Service Bulletin on the 2003 Accords.
>Check with your local dealer and get them done for free
>
Where can I find this Michelle? Do you have any HTTP for it?
My local dealer tried to shrug responsibility. It would be good to
take this ammo into them.
Thank you,
Jody
11-28-2003 | 09:25 PM
#33
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in
news:d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com:
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
><michelle.oleary@verizon.net> wrote:
>
>>There is a Service Bulletin on the 2003 Accords.
>>Check with your local dealer and get them done for free
>>
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
>
If you have to force your dealer to do the right job,I'd consider taking my
business elsewhere.Would you trust them after that?
--
Jim Yanik,NRA member
jyanik-at-kua.net
news:d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com:
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
><michelle.oleary@verizon.net> wrote:
>
>>There is a Service Bulletin on the 2003 Accords.
>>Check with your local dealer and get them done for free
>>
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
>
If you have to force your dealer to do the right job,I'd consider taking my
business elsewhere.Would you trust them after that?
--
Jim Yanik,NRA member
jyanik-at-kua.net
11-28-2003 | 09:25 PM
#34
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in
news:d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com:
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
><michelle.oleary@verizon.net> wrote:
>
>>There is a Service Bulletin on the 2003 Accords.
>>Check with your local dealer and get them done for free
>>
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
>
If you have to force your dealer to do the right job,I'd consider taking my
business elsewhere.Would you trust them after that?
--
Jim Yanik,NRA member
jyanik-at-kua.net
news:d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com:
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
><michelle.oleary@verizon.net> wrote:
>
>>There is a Service Bulletin on the 2003 Accords.
>>Check with your local dealer and get them done for free
>>
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
>
If you have to force your dealer to do the right job,I'd consider taking my
business elsewhere.Would you trust them after that?
--
Jim Yanik,NRA member
jyanik-at-kua.net
11-28-2003 | 09:25 PM
#35
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in
news:d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com:
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
><michelle.oleary@verizon.net> wrote:
>
>>There is a Service Bulletin on the 2003 Accords.
>>Check with your local dealer and get them done for free
>>
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
>
If you have to force your dealer to do the right job,I'd consider taking my
business elsewhere.Would you trust them after that?
--
Jim Yanik,NRA member
jyanik-at-kua.net
news:d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com:
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
><michelle.oleary@verizon.net> wrote:
>
>>There is a Service Bulletin on the 2003 Accords.
>>Check with your local dealer and get them done for free
>>
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
>
If you have to force your dealer to do the right job,I'd consider taking my
business elsewhere.Would you trust them after that?
--
Jim Yanik,NRA member
jyanik-at-kua.net
11-28-2003 | 09:25 PM
#36
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in
news:d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com:
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
><michelle.oleary@verizon.net> wrote:
>
>>There is a Service Bulletin on the 2003 Accords.
>>Check with your local dealer and get them done for free
>>
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
>
If you have to force your dealer to do the right job,I'd consider taking my
business elsewhere.Would you trust them after that?
--
Jim Yanik,NRA member
jyanik-at-kua.net
news:d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com:
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
><michelle.oleary@verizon.net> wrote:
>
>>There is a Service Bulletin on the 2003 Accords.
>>Check with your local dealer and get them done for free
>>
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
>
If you have to force your dealer to do the right job,I'd consider taking my
business elsewhere.Would you trust them after that?
--
Jim Yanik,NRA member
jyanik-at-kua.net
11-29-2003 | 12:23 AM
#37
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in message news:<d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com>. ..
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> <michelle.oleary@verizon.net> wrote:
>
> >There is a Service Bulletin on the 2003 Accords.
> >Check with your local dealer and get them done for free
> >
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
the bulletin covers certain l-4 and v-6 models in a specific VIN
range. the solution is to re-surface the rotors and replace the pads
with a newer style.
make the dealer look it up on ISIS.
slotted and cross drilled rotors are a good investment also. just
make sure you can find someone who can machine them in the area,
conventional lathes won't work, they need to be stone ground.
Chip
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> <michelle.oleary@verizon.net> wrote:
>
> >There is a Service Bulletin on the 2003 Accords.
> >Check with your local dealer and get them done for free
> >
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
the bulletin covers certain l-4 and v-6 models in a specific VIN
range. the solution is to re-surface the rotors and replace the pads
with a newer style.
make the dealer look it up on ISIS.
slotted and cross drilled rotors are a good investment also. just
make sure you can find someone who can machine them in the area,
conventional lathes won't work, they need to be stone ground.
Chip
11-29-2003 | 12:23 AM
#38
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in message news:<d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com>. ..
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> <michelle.oleary@verizon.net> wrote:
>
> >There is a Service Bulletin on the 2003 Accords.
> >Check with your local dealer and get them done for free
> >
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
the bulletin covers certain l-4 and v-6 models in a specific VIN
range. the solution is to re-surface the rotors and replace the pads
with a newer style.
make the dealer look it up on ISIS.
slotted and cross drilled rotors are a good investment also. just
make sure you can find someone who can machine them in the area,
conventional lathes won't work, they need to be stone ground.
Chip
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> <michelle.oleary@verizon.net> wrote:
>
> >There is a Service Bulletin on the 2003 Accords.
> >Check with your local dealer and get them done for free
> >
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
the bulletin covers certain l-4 and v-6 models in a specific VIN
range. the solution is to re-surface the rotors and replace the pads
with a newer style.
make the dealer look it up on ISIS.
slotted and cross drilled rotors are a good investment also. just
make sure you can find someone who can machine them in the area,
conventional lathes won't work, they need to be stone ground.
Chip
11-29-2003 | 12:23 AM
#39
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in message news:<d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com>. ..
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> <michelle.oleary@verizon.net> wrote:
>
> >There is a Service Bulletin on the 2003 Accords.
> >Check with your local dealer and get them done for free
> >
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
the bulletin covers certain l-4 and v-6 models in a specific VIN
range. the solution is to re-surface the rotors and replace the pads
with a newer style.
make the dealer look it up on ISIS.
slotted and cross drilled rotors are a good investment also. just
make sure you can find someone who can machine them in the area,
conventional lathes won't work, they need to be stone ground.
Chip
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> <michelle.oleary@verizon.net> wrote:
>
> >There is a Service Bulletin on the 2003 Accords.
> >Check with your local dealer and get them done for free
> >
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
the bulletin covers certain l-4 and v-6 models in a specific VIN
range. the solution is to re-surface the rotors and replace the pads
with a newer style.
make the dealer look it up on ISIS.
slotted and cross drilled rotors are a good investment also. just
make sure you can find someone who can machine them in the area,
conventional lathes won't work, they need to be stone ground.
Chip
11-29-2003 | 12:23 AM
#40
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in message news:<d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com>. ..
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> <michelle.oleary@verizon.net> wrote:
>
> >There is a Service Bulletin on the 2003 Accords.
> >Check with your local dealer and get them done for free
> >
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
the bulletin covers certain l-4 and v-6 models in a specific VIN
range. the solution is to re-surface the rotors and replace the pads
with a newer style.
make the dealer look it up on ISIS.
slotted and cross drilled rotors are a good investment also. just
make sure you can find someone who can machine them in the area,
conventional lathes won't work, they need to be stone ground.
Chip
> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> <michelle.oleary@verizon.net> wrote:
>
> >There is a Service Bulletin on the 2003 Accords.
> >Check with your local dealer and get them done for free
> >
> Where can I find this Michelle? Do you have any HTTP for it?
> My local dealer tried to shrug responsibility. It would be good to
> take this ammo into them.
>
> Thank you,
> Jody
the bulletin covers certain l-4 and v-6 models in a specific VIN
range. the solution is to re-surface the rotors and replace the pads
with a newer style.
make the dealer look it up on ISIS.
slotted and cross drilled rotors are a good investment also. just
make sure you can find someone who can machine them in the area,
conventional lathes won't work, they need to be stone ground.
Chip
11-29-2003 | 09:55 AM
#41
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
"Chip Stein" <chip@chipanddebby.com> wrote in message
news:5ddcea74.0311282123.6178b399@posting.google.c om...
> Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in message
news:<d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com>. ..
> > On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> > <michelle.oleary@verizon.net> wrote:
> >
> > >There is a Service Bulletin on the 2003 Accords.
> > >Check with your local dealer and get them done for free
> > >
> > Where can I find this Michelle? Do you have any HTTP for it?
> > My local dealer tried to shrug responsibility. It would be good to
> > take this ammo into them.
> >
> > Thank you,
> > Jody
>
> the bulletin covers certain l-4 and v-6 models in a specific VIN
> range. the solution is to re-surface the rotors and replace the pads
> with a newer style.
> make the dealer look it up on ISIS.
> slotted and cross drilled rotors are a good investment also. just
> make sure you can find someone who can machine them in the area,
> conventional lathes won't work, they need to be stone ground.
> Chip
ISIS?
news:5ddcea74.0311282123.6178b399@posting.google.c om...
> Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in message
news:<d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com>. ..
> > On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> > <michelle.oleary@verizon.net> wrote:
> >
> > >There is a Service Bulletin on the 2003 Accords.
> > >Check with your local dealer and get them done for free
> > >
> > Where can I find this Michelle? Do you have any HTTP for it?
> > My local dealer tried to shrug responsibility. It would be good to
> > take this ammo into them.
> >
> > Thank you,
> > Jody
>
> the bulletin covers certain l-4 and v-6 models in a specific VIN
> range. the solution is to re-surface the rotors and replace the pads
> with a newer style.
> make the dealer look it up on ISIS.
> slotted and cross drilled rotors are a good investment also. just
> make sure you can find someone who can machine them in the area,
> conventional lathes won't work, they need to be stone ground.
> Chip
ISIS?
11-29-2003 | 09:55 AM
#42
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
"Chip Stein" <chip@chipanddebby.com> wrote in message
news:5ddcea74.0311282123.6178b399@posting.google.c om...
> Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in message
news:<d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com>. ..
> > On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> > <michelle.oleary@verizon.net> wrote:
> >
> > >There is a Service Bulletin on the 2003 Accords.
> > >Check with your local dealer and get them done for free
> > >
> > Where can I find this Michelle? Do you have any HTTP for it?
> > My local dealer tried to shrug responsibility. It would be good to
> > take this ammo into them.
> >
> > Thank you,
> > Jody
>
> the bulletin covers certain l-4 and v-6 models in a specific VIN
> range. the solution is to re-surface the rotors and replace the pads
> with a newer style.
> make the dealer look it up on ISIS.
> slotted and cross drilled rotors are a good investment also. just
> make sure you can find someone who can machine them in the area,
> conventional lathes won't work, they need to be stone ground.
> Chip
ISIS?
news:5ddcea74.0311282123.6178b399@posting.google.c om...
> Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in message
news:<d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com>. ..
> > On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> > <michelle.oleary@verizon.net> wrote:
> >
> > >There is a Service Bulletin on the 2003 Accords.
> > >Check with your local dealer and get them done for free
> > >
> > Where can I find this Michelle? Do you have any HTTP for it?
> > My local dealer tried to shrug responsibility. It would be good to
> > take this ammo into them.
> >
> > Thank you,
> > Jody
>
> the bulletin covers certain l-4 and v-6 models in a specific VIN
> range. the solution is to re-surface the rotors and replace the pads
> with a newer style.
> make the dealer look it up on ISIS.
> slotted and cross drilled rotors are a good investment also. just
> make sure you can find someone who can machine them in the area,
> conventional lathes won't work, they need to be stone ground.
> Chip
ISIS?
11-29-2003 | 09:55 AM
#43
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
"Chip Stein" <chip@chipanddebby.com> wrote in message
news:5ddcea74.0311282123.6178b399@posting.google.c om...
> Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in message
news:<d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com>. ..
> > On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> > <michelle.oleary@verizon.net> wrote:
> >
> > >There is a Service Bulletin on the 2003 Accords.
> > >Check with your local dealer and get them done for free
> > >
> > Where can I find this Michelle? Do you have any HTTP for it?
> > My local dealer tried to shrug responsibility. It would be good to
> > take this ammo into them.
> >
> > Thank you,
> > Jody
>
> the bulletin covers certain l-4 and v-6 models in a specific VIN
> range. the solution is to re-surface the rotors and replace the pads
> with a newer style.
> make the dealer look it up on ISIS.
> slotted and cross drilled rotors are a good investment also. just
> make sure you can find someone who can machine them in the area,
> conventional lathes won't work, they need to be stone ground.
> Chip
ISIS?
news:5ddcea74.0311282123.6178b399@posting.google.c om...
> Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in message
news:<d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com>. ..
> > On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> > <michelle.oleary@verizon.net> wrote:
> >
> > >There is a Service Bulletin on the 2003 Accords.
> > >Check with your local dealer and get them done for free
> > >
> > Where can I find this Michelle? Do you have any HTTP for it?
> > My local dealer tried to shrug responsibility. It would be good to
> > take this ammo into them.
> >
> > Thank you,
> > Jody
>
> the bulletin covers certain l-4 and v-6 models in a specific VIN
> range. the solution is to re-surface the rotors and replace the pads
> with a newer style.
> make the dealer look it up on ISIS.
> slotted and cross drilled rotors are a good investment also. just
> make sure you can find someone who can machine them in the area,
> conventional lathes won't work, they need to be stone ground.
> Chip
ISIS?
11-29-2003 | 09:55 AM
#44
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
"Chip Stein" <chip@chipanddebby.com> wrote in message
news:5ddcea74.0311282123.6178b399@posting.google.c om...
> Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in message
news:<d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com>. ..
> > On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> > <michelle.oleary@verizon.net> wrote:
> >
> > >There is a Service Bulletin on the 2003 Accords.
> > >Check with your local dealer and get them done for free
> > >
> > Where can I find this Michelle? Do you have any HTTP for it?
> > My local dealer tried to shrug responsibility. It would be good to
> > take this ammo into them.
> >
> > Thank you,
> > Jody
>
> the bulletin covers certain l-4 and v-6 models in a specific VIN
> range. the solution is to re-surface the rotors and replace the pads
> with a newer style.
> make the dealer look it up on ISIS.
> slotted and cross drilled rotors are a good investment also. just
> make sure you can find someone who can machine them in the area,
> conventional lathes won't work, they need to be stone ground.
> Chip
ISIS?
news:5ddcea74.0311282123.6178b399@posting.google.c om...
> Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in message
news:<d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com>. ..
> > On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
> > <michelle.oleary@verizon.net> wrote:
> >
> > >There is a Service Bulletin on the 2003 Accords.
> > >Check with your local dealer and get them done for free
> > >
> > Where can I find this Michelle? Do you have any HTTP for it?
> > My local dealer tried to shrug responsibility. It would be good to
> > take this ammo into them.
> >
> > Thank you,
> > Jody
>
> the bulletin covers certain l-4 and v-6 models in a specific VIN
> range. the solution is to re-surface the rotors and replace the pads
> with a newer style.
> make the dealer look it up on ISIS.
> slotted and cross drilled rotors are a good investment also. just
> make sure you can find someone who can machine them in the area,
> conventional lathes won't work, they need to be stone ground.
> Chip
ISIS?
11-29-2003 | 09:58 AM
#45
Guest
Posts: n/a
Re: solution to 2003 Accord rotor problem???
On Sat, 29 Nov 2003 02:25:53 +0000 (UTC), Jim Yanik <jyanik@abuse.gov>
wrote:
>Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in
>news:d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com :
>
>> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
>><michelle.oleary@verizon.net> wrote:
>>
>>>There is a Service Bulletin on the 2003 Accords.
>>>Check with your local dealer and get them done for free
>>>
>> Where can I find this Michelle? Do you have any HTTP for it?
>> My local dealer tried to shrug responsibility. It would be good to
>> take this ammo into them.
>>
>> Thank you,
>> Jody
>>
>
>If you have to force your dealer to do the right job,I'd consider taking my
>business elsewhere.Would you trust them after that?
I'm not sure I fully understand what you're saying. I should take it
somewhere else and pay to have it done as opposed to covered under
warranty?
I have my own mechanic for normal non-warranty work. (I keep him in a
jar :- P )
Jody
wrote:
>Knuckles Muldoon <mortimersnurd@hotmail.com> wrote in
>news:d7ifsvse4vda8o3ti1pqm4vc53l9bbq9ac@4ax.com :
>
>> On Thu, 27 Nov 2003 19:30:06 GMT, "Michelle O'Leary"
>><michelle.oleary@verizon.net> wrote:
>>
>>>There is a Service Bulletin on the 2003 Accords.
>>>Check with your local dealer and get them done for free
>>>
>> Where can I find this Michelle? Do you have any HTTP for it?
>> My local dealer tried to shrug responsibility. It would be good to
>> take this ammo into them.
>>
>> Thank you,
>> Jody
>>
>
>If you have to force your dealer to do the right job,I'd consider taking my
>business elsewhere.Would you trust them after that?
I'm not sure I fully understand what you're saying. I should take it
somewhere else and pay to have it done as opposed to covered under
warranty?
I have my own mechanic for normal non-warranty work. (I keep him in a
jar :- P )
Jody