replace high beam on a 92 accord?
09-20-2005 | 07:01 PM
#2
Guest
Posts: n/a
Re: replace high beam on a 92 accord?
"Jim Eales" <eales@nospampurdue.edu> wrote in message
news:wF%Xe.353998$x96.105952@attbi_s72...
> Info on how to do it would be appreciated.
>
> Jim Eales
>
>
If the same as the '93:
1. Disconnect the 2-pin connector from the bulb. If on the right side,
remove battery and coolant reservoir first. The connector appears to pull
off downward, with a depress-tab latch.
2. Turn the retaining ring CCW, then remove the bulb.
If you have to replace the entire unit, there is more.
Remember to clean the new bulb with alcohol before installing if you touch
it with your fingers.
(from the Helm manual for the '93 Accord)
Mike
news:wF%Xe.353998$x96.105952@attbi_s72...
> Info on how to do it would be appreciated.
>
> Jim Eales
>
>
If the same as the '93:
1. Disconnect the 2-pin connector from the bulb. If on the right side,
remove battery and coolant reservoir first. The connector appears to pull
off downward, with a depress-tab latch.
2. Turn the retaining ring CCW, then remove the bulb.
If you have to replace the entire unit, there is more.
Remember to clean the new bulb with alcohol before installing if you touch
it with your fingers.
(from the Helm manual for the '93 Accord)
Mike
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)