Can someone help, or point me to a website or something with
instructions on this?

I'm trying to replace the original radio (a Philips DC680) in a 1990
Honda Civic. I've got the cover panel off, but can't figure out how
to release the side catches: they don't appear to be the modern
system of using a slide-in key to lift the side spring-catches.

It presumably involves removing the copper-coloured springs on the
sides that can be seen in this picture -- but I don't see how one
does that:

http://homepage.ntlworld.com/harvey....temp/radio.jpg

Any help greatly appreciated.

--
Cheers,
Harvey

 

HVS wrote:
>
> Can someone help, or point me to a website or something with
> instructions on this?
>
> I'm trying to replace the original radio (a Philips DC680) in a 1990
> Honda Civic. I've got the cover panel off, but can't figure out how
> to release the side catches: they don't appear to be the modern
> system of using a slide-in key to lift the side spring-catches.
>
> It presumably involves removing the copper-coloured springs on the
> sides that can be seen in this picture -- but I don't see how one
> does that:
>
> http://homepage.ntlworld.com/harvey....temp/radio.jpg
>
> Any help greatly appreciated.
>

The original equipment radio on my '88 Civic was bolted in with a bracket
attached to the back of the radio.

For future reference see http://www.installdr.com/

Eric

 

HVS wrote:
>
> Can someone help, or point me to a website or something with
> instructions on this?
>
> I'm trying to replace the original radio (a Philips DC680) in a 1990
> Honda Civic. I've got the cover panel off, but can't figure out how
> to release the side catches: they don't appear to be the modern
> system of using a slide-in key to lift the side spring-catches.
>
> It presumably involves removing the copper-coloured springs on the
> sides that can be seen in this picture -- but I don't see how one
> does that:
>
> http://homepage.ntlworld.com/harvey....temp/radio.jpg
>
> Any help greatly appreciated.
>

The original equipment radio on my '88 Civic was bolted in with a bracket
attached to the back of the radio.

For future reference see http://www.installdr.com/

Eric

 

On 31 May 2007, Eric Johnson wrote

> HVS wrote:
>>
>> Can someone help, or point me to a website or something with
>> instructions on this?
>>
>> I'm trying to replace the original radio (a Philips DC680) in a
>> 1990 Honda Civic. I've got the cover panel off, but can't
>> figure out how to release the side catches: they don't appear
>> to be the modern system of using a slide-in key to lift the
>> side spring-catches.
>>
>> It presumably involves removing the copper-coloured springs on
>> the sides that can be seen in this picture -- but I don't see
>> how one does that:
>>
>> http://homepage.ntlworld.com/harvey....temp/radio.jpg
>>
>> Any help greatly appreciated.
>>
>
> The original equipment radio on my '88 Civic was bolted in with
> a bracket attached to the back of the radio.
>
> For future reference see http://www.installdr.com/

Ah; that would explain why I couldn't fathom it!

I'll look more closely at it -- thanks for the link.

--
Cheers,
Harvey

 

On 31 May 2007, Eric Johnson wrote

> HVS wrote:
>>
>> Can someone help, or point me to a website or something with
>> instructions on this?
>>
>> I'm trying to replace the original radio (a Philips DC680) in a
>> 1990 Honda Civic. I've got the cover panel off, but can't
>> figure out how to release the side catches: they don't appear
>> to be the modern system of using a slide-in key to lift the
>> side spring-catches.
>>
>> It presumably involves removing the copper-coloured springs on
>> the sides that can be seen in this picture -- but I don't see
>> how one does that:
>>
>> http://homepage.ntlworld.com/harvey....temp/radio.jpg
>>
>> Any help greatly appreciated.
>>
>
> The original equipment radio on my '88 Civic was bolted in with
> a bracket attached to the back of the radio.
>
> For future reference see http://www.installdr.com/

Ah; that would explain why I couldn't fathom it!

I'll look more closely at it -- thanks for the link.

--
Cheers,
Harvey

 

HVS wrote:
>
> On 31 May 2007, Eric Johnson wrote
>
> > HVS wrote:
> >>
> >> Can someone help, or point me to a website or something with
> >> instructions on this?
> >>
> >> I'm trying to replace the original radio (a Philips DC680) in a
> >> 1990 Honda Civic. I've got the cover panel off, but can't
> >> figure out how to release the side catches: they don't appear
> >> to be the modern system of using a slide-in key to lift the
> >> side spring-catches.
> >>
> >> It presumably involves removing the copper-coloured springs on
> >> the sides that can be seen in this picture -- but I don't see
> >> how one does that:
> >>
> >> http://homepage.ntlworld.com/harvey....temp/radio.jpg
> >>
> >> Any help greatly appreciated.
> >>
> >
> > The original equipment radio on my '88 Civic was bolted in with
> > a bracket attached to the back of the radio.
> >
> > For future reference see http://www.installdr.com/
>
> Ah; that would explain why I couldn't fathom it!
>
> I'll look more closely at it -- thanks for the link.
>

I also had to remove the center dash console. There should be some screws
along the sides that hold it in, 4 in total one of which is hidden by the
glove box. You'll have to disconnect the electrical connector for the
cigarette lighter as well in order to remove the center console.

 

HVS wrote:
>
> On 31 May 2007, Eric Johnson wrote
>
> > HVS wrote:
> >>
> >> Can someone help, or point me to a website or something with
> >> instructions on this?
> >>
> >> I'm trying to replace the original radio (a Philips DC680) in a
> >> 1990 Honda Civic. I've got the cover panel off, but can't
> >> figure out how to release the side catches: they don't appear
> >> to be the modern system of using a slide-in key to lift the
> >> side spring-catches.
> >>
> >> It presumably involves removing the copper-coloured springs on
> >> the sides that can be seen in this picture -- but I don't see
> >> how one does that:
> >>
> >> http://homepage.ntlworld.com/harvey....temp/radio.jpg
> >>
> >> Any help greatly appreciated.
> >>
> >
> > The original equipment radio on my '88 Civic was bolted in with
> > a bracket attached to the back of the radio.
> >
> > For future reference see http://www.installdr.com/
>
> Ah; that would explain why I couldn't fathom it!
>
> I'll look more closely at it -- thanks for the link.
>

I also had to remove the center dash console. There should be some screws
along the sides that hold it in, 4 in total one of which is hidden by the
glove box. You'll have to disconnect the electrical connector for the
cigarette lighter as well in order to remove the center console.

 

On 31 May 2007, Eric wrote
> HVS wrote:
>> On 31 May 2007, Eric Johnson wrote
>>> HVS wrote:
>>>>
>>>> I'm trying to replace the original radio (a Philips DC680) in
>>>> a 1990 Honda Civic. I've got the cover panel off, but can't
>>>> figure out how to release the side catches: they don't
>>>> appear to be the modern system of using a slide-in key to
>>>> lift the side spring-catches.

-snip-

>>> The original equipment radio on my '88 Civic was bolted in
>>> with a bracket attached to the back of the radio.
>>> For future reference see http://www.installdr.com/
>>
>> Ah; that would explain why I couldn't fathom it!
>> I'll look more closely at it -- thanks for the link.
>
> I also had to remove the center dash console. There should be
> some screws along the sides that hold it in, 4 in total one of
> which is hidden by the glove box. You'll have to disconnect
> the electrical connector for the cigarette lighter as well in
> order to remove the center console.

Thanks; sounds like fun...

Why can't stuff like this be *simple*?

--
Cheers,
Harvey

 

On 31 May 2007, Eric wrote
> HVS wrote:
>> On 31 May 2007, Eric Johnson wrote
>>> HVS wrote:
>>>>
>>>> I'm trying to replace the original radio (a Philips DC680) in
>>>> a 1990 Honda Civic. I've got the cover panel off, but can't
>>>> figure out how to release the side catches: they don't
>>>> appear to be the modern system of using a slide-in key to
>>>> lift the side spring-catches.

-snip-

>>> The original equipment radio on my '88 Civic was bolted in
>>> with a bracket attached to the back of the radio.
>>> For future reference see http://www.installdr.com/
>>
>> Ah; that would explain why I couldn't fathom it!
>> I'll look more closely at it -- thanks for the link.
>
> I also had to remove the center dash console. There should be
> some screws along the sides that hold it in, 4 in total one of
> which is hidden by the glove box. You'll have to disconnect
> the electrical connector for the cigarette lighter as well in
> order to remove the center console.

Thanks; sounds like fun...

Why can't stuff like this be *simple*?

--
Cheers,
Harvey

 

HVS wrote:
>
> On 31 May 2007, Eric wrote
> > HVS wrote:
> >> On 31 May 2007, Eric Johnson wrote
> >>> HVS wrote:
> >>>>
> >>>> I'm trying to replace the original radio (a Philips DC680) in
> >>>> a 1990 Honda Civic. I've got the cover panel off, but can't
> >>>> figure out how to release the side catches: they don't
> >>>> appear to be the modern system of using a slide-in key to
> >>>> lift the side spring-catches.
>
> -snip-
>
> >>> The original equipment radio on my '88 Civic was bolted in
> >>> with a bracket attached to the back of the radio.
> >>> For future reference see http://www.installdr.com/
> >>
> >> Ah; that would explain why I couldn't fathom it!
> >> I'll look more closely at it -- thanks for the link.
> >
> > I also had to remove the center dash console. There should be
> > some screws along the sides that hold it in, 4 in total one of
> > which is hidden by the glove box. You'll have to disconnect
> > the electrical connector for the cigarette lighter as well in
> > order to remove the center console.
>
> Thanks; sounds like fun...
>
> Why can't stuff like this be *simple*?
>

It is simple. Once you remove the center console, which is fairly easy to
do, everything is out in the open.

Eric

 

HVS wrote:
>
> On 31 May 2007, Eric wrote
> > HVS wrote:
> >> On 31 May 2007, Eric Johnson wrote
> >>> HVS wrote:
> >>>>
> >>>> I'm trying to replace the original radio (a Philips DC680) in
> >>>> a 1990 Honda Civic. I've got the cover panel off, but can't
> >>>> figure out how to release the side catches: they don't
> >>>> appear to be the modern system of using a slide-in key to
> >>>> lift the side spring-catches.
>
> -snip-
>
> >>> The original equipment radio on my '88 Civic was bolted in
> >>> with a bracket attached to the back of the radio.
> >>> For future reference see http://www.installdr.com/
> >>
> >> Ah; that would explain why I couldn't fathom it!
> >> I'll look more closely at it -- thanks for the link.
> >
> > I also had to remove the center dash console. There should be
> > some screws along the sides that hold it in, 4 in total one of
> > which is hidden by the glove box. You'll have to disconnect
> > the electrical connector for the cigarette lighter as well in
> > order to remove the center console.
>
> Thanks; sounds like fun...
>
> Why can't stuff like this be *simple*?
>

It is simple. Once you remove the center console, which is fairly easy to
do, everything is out in the open.

Eric