Question on air compressor
#1
Guest
Posts: n/a
Question on air compressor
Hi there, fellow car enthusiasts!
I am looking for a simple air compressor to do simple house work,
nothing too heavy duty. Also, I do not really need to have full
continuous operation as long it can spray a few things in, say,
15 to 20 seconds burst, like: deck stain (light oil base),
oil-based rust proofing (like light oil Rust Check sold at
Canadian Tire and elsewhere) and latex paint. I am not interested
in using it for more powerful air tools.
I am considering this air compressor from Canadian Tire. Would
this do the job?
Thanks again,
http://www.canadiantire.ca/assortmen...romSearch=true
If this link does not work, here are the details:
Campbell Hausfeld 1/3-hp, 3-gallon Electric Air Compressor
a.. 1/3-hp peak/3-gallon with 100-psi max
a.. 120V
a.. Pump: 3,000 rpm
a.. 25' air hose with air chuck, one-touch coupler (1/4"),
inflator gun, 2 inflation needles, inflation nozzle, Teflon pipe
tape (32.8") and 2 male coupler (1/4") also included
a.. Model No. 410788
I am looking for a simple air compressor to do simple house work,
nothing too heavy duty. Also, I do not really need to have full
continuous operation as long it can spray a few things in, say,
15 to 20 seconds burst, like: deck stain (light oil base),
oil-based rust proofing (like light oil Rust Check sold at
Canadian Tire and elsewhere) and latex paint. I am not interested
in using it for more powerful air tools.
I am considering this air compressor from Canadian Tire. Would
this do the job?
Thanks again,
http://www.canadiantire.ca/assortmen...romSearch=true
If this link does not work, here are the details:
Campbell Hausfeld 1/3-hp, 3-gallon Electric Air Compressor
a.. 1/3-hp peak/3-gallon with 100-psi max
a.. 120V
a.. Pump: 3,000 rpm
a.. 25' air hose with air chuck, one-touch coupler (1/4"),
inflator gun, 2 inflation needles, inflation nozzle, Teflon pipe
tape (32.8") and 2 male coupler (1/4") also included
a.. Model No. 410788
#2
Guest
Posts: n/a
Re: Question on air compressor
#3
Guest
Posts: n/a
Re: Question on air compressor
Frank wrote:
>
> Hi there, fellow car enthusiasts!
>
> I am looking for a simple air compressor to do simple house work,
> nothing too heavy duty. Also, I do not really need to have full
> continuous operation as long it can spray a few things in, say,
> 15 to 20 seconds burst, like: deck stain (light oil base),
> oil-based rust proofing (like light oil Rust Check sold at
> Canadian Tire and elsewhere) and latex paint. I am not interested
> in using it for more powerful air tools.
>
> I am considering this air compressor from Canadian Tire. Would
> this do the job?
>
> Thanks again,
>
> http://www.canadiantire.ca/assortmen...romSearch=true
>
> If this link does not work, here are the details:
>
> Campbell Hausfeld 1/3-hp, 3-gallon Electric Air Compressor
> a.. 1/3-hp peak/3-gallon with 100-psi max
> a.. 120V
> a.. Pump: 3,000 rpm
> a.. 25' air hose with air chuck, one-touch coupler (1/4"),
> inflator gun, 2 inflation needles, inflation nozzle, Teflon pipe
> tape (32.8") and 2 male coupler (1/4") also included
> a.. Model No. 410788
CFM is not listed. Spray 10 seconds, wait 1 minute, spray 10
seconds, etc. I can tell you that it will be LOUD. You probably
won't want to use it in the garage.
My personal compressor is 2 cylinder, 3 hp, 30 gallon tank.
It will NOT keep up with my spray painter or air tools
if I use it continuously.
>
> Hi there, fellow car enthusiasts!
>
> I am looking for a simple air compressor to do simple house work,
> nothing too heavy duty. Also, I do not really need to have full
> continuous operation as long it can spray a few things in, say,
> 15 to 20 seconds burst, like: deck stain (light oil base),
> oil-based rust proofing (like light oil Rust Check sold at
> Canadian Tire and elsewhere) and latex paint. I am not interested
> in using it for more powerful air tools.
>
> I am considering this air compressor from Canadian Tire. Would
> this do the job?
>
> Thanks again,
>
> http://www.canadiantire.ca/assortmen...romSearch=true
>
> If this link does not work, here are the details:
>
> Campbell Hausfeld 1/3-hp, 3-gallon Electric Air Compressor
> a.. 1/3-hp peak/3-gallon with 100-psi max
> a.. 120V
> a.. Pump: 3,000 rpm
> a.. 25' air hose with air chuck, one-touch coupler (1/4"),
> inflator gun, 2 inflation needles, inflation nozzle, Teflon pipe
> tape (32.8") and 2 male coupler (1/4") also included
> a.. Model No. 410788
CFM is not listed. Spray 10 seconds, wait 1 minute, spray 10
seconds, etc. I can tell you that it will be LOUD. You probably
won't want to use it in the garage.
My personal compressor is 2 cylinder, 3 hp, 30 gallon tank.
It will NOT keep up with my spray painter or air tools
if I use it continuously.
#4
Guest
Posts: n/a
Re: Question on air compressor
I have a 1.5HP 120PSI 3 Gal. tank DeVilbiss for use in my garage, and
it works fine. I only use it for tires and limited impact tool use.
When the compressor is running, it is loud, but it beats the heck out
of the alternative. In removing frozen bolts from brake calipers and
hubs, it's earn its keep many times. If you plan on extensive use of
any air tools or painting, I would strongly suggest a larger tank, as
per Paul's post above.
it works fine. I only use it for tires and limited impact tool use.
When the compressor is running, it is loud, but it beats the heck out
of the alternative. In removing frozen bolts from brake calipers and
hubs, it's earn its keep many times. If you plan on extensive use of
any air tools or painting, I would strongly suggest a larger tank, as
per Paul's post above.
#5
Guest
Posts: n/a
Re: Question on air compressor
<w9cw@yahoo.com> wrote in message
news:1137349634.915858.299100@o13g2000cwo.googlegr oups.com...
>I have a 1.5HP 120PSI 3 Gal. tank DeVilbiss for use in my
>garage, and
> it works fine. I only use it for tires and limited impact tool
> use.
> When the compressor is running, it is loud, but it beats the
> heck out
> of the alternative. In removing frozen bolts from brake
> calipers and
> hubs, it's earn its keep many times. If you plan on extensive
> use of
> any air tools or painting, I would strongly suggest a larger
> tank, as
> per Paul's post above.
Thanks for the suggestion. I will pass then. Cheers!
#6
Guest
Posts: n/a
Re: Question on air compressor
"Frank" <NOSPAM@NOSPAM.com> wrote in message
news:43ca7fd4@usenet.zapto.org...
> Hi there, fellow car enthusiasts!
>
> I am looking for a simple air compressor to do simple house work, nothing
> too heavy duty. Also, I do not really need to have full continuous
> operation as long it can spray a few things in, say, 15 to 20 seconds
> burst, like: deck stain (light oil base), oil-based rust proofing (like
> light oil Rust Check sold at Canadian Tire and elsewhere) and latex paint.
> I am not interested in using it for more powerful air tools.
>
> I am considering this air compressor from Canadian Tire. Would this do the
> job?
>
> Thanks again,
>
> http://www.canadiantire.ca/assortmen...romSearch=true
>
> If this link does not work, here are the details:
>
> Campbell Hausfeld 1/3-hp, 3-gallon Electric Air Compressor
> a.. 1/3-hp peak/3-gallon with 100-psi max
> a.. 120V
> a.. Pump: 3,000 rpm
> a.. 25' air hose with air chuck, one-touch coupler (1/4"), inflator gun, 2
> inflation needles, inflation nozzle, Teflon pipe tape (32.8") and 2 male
> coupler (1/4") also included
> a.. Model No. 410788
>
>
My opinion is that a fractional hp unit is only useful for inflating tires.
As mentioned, almost any compressor in the price range of ordinary people
like us is ungodly loud. I have a Craftsman 3hp max / 1.5 hp running, 15
gallon 8 cfm compressor in the garage. It requires hearing protection when
it is running and the neighbors have asked what all the noise is, even
though I keep the door closed while using it. All the noise comes from the
unmuffled air intake. I've looked for ways to enclose the intake so I can
muffle it, but I've seen nothing obvious yet.
Mike
news:43ca7fd4@usenet.zapto.org...
> Hi there, fellow car enthusiasts!
>
> I am looking for a simple air compressor to do simple house work, nothing
> too heavy duty. Also, I do not really need to have full continuous
> operation as long it can spray a few things in, say, 15 to 20 seconds
> burst, like: deck stain (light oil base), oil-based rust proofing (like
> light oil Rust Check sold at Canadian Tire and elsewhere) and latex paint.
> I am not interested in using it for more powerful air tools.
>
> I am considering this air compressor from Canadian Tire. Would this do the
> job?
>
> Thanks again,
>
> http://www.canadiantire.ca/assortmen...romSearch=true
>
> If this link does not work, here are the details:
>
> Campbell Hausfeld 1/3-hp, 3-gallon Electric Air Compressor
> a.. 1/3-hp peak/3-gallon with 100-psi max
> a.. 120V
> a.. Pump: 3,000 rpm
> a.. 25' air hose with air chuck, one-touch coupler (1/4"), inflator gun, 2
> inflation needles, inflation nozzle, Teflon pipe tape (32.8") and 2 male
> coupler (1/4") also included
> a.. Model No. 410788
>
>
My opinion is that a fractional hp unit is only useful for inflating tires.
As mentioned, almost any compressor in the price range of ordinary people
like us is ungodly loud. I have a Craftsman 3hp max / 1.5 hp running, 15
gallon 8 cfm compressor in the garage. It requires hearing protection when
it is running and the neighbors have asked what all the noise is, even
though I keep the door closed while using it. All the noise comes from the
unmuffled air intake. I've looked for ways to enclose the intake so I can
muffle it, but I've seen nothing obvious yet.
Mike
#7
Guest
Posts: n/a
Re: Question on air compressor
On Sun, 15 Jan 2006 14:28:31 -0700, "Michael Pardee"
<michaeltnull@cybertrails.com> wrote:
>"Frank" <NOSPAM@NOSPAM.com> wrote in message
>news:43ca7fd4@usenet.zapto.org...
>> Hi there, fellow car enthusiasts!
>>
>> I am looking for a simple air compressor to do simple house work, nothing
>> too heavy duty. Also, I do not really need to have full continuous
>> operation as long it can ...
>My opinion is that a fractional hp unit is only useful for inflating tires.
>As mentioned, almost any compressor in the price range of ordinary people
>like us is ungodly loud.
I concur, though even inflating tires can be (haha) tiresome with a
small unit. Like many people, I bought a small compressor to start
with but rapidly found that I'd made a mistake.
I think my first one may have given acceptable performance with an
airbrush, or blowing up beach-***** and possibly bicycle tires.
I'm fortunate to live where there are no neighbo(u)rs within close
proximity. However, there are things you can do to muffle and contain
the noise, which is, I think, essentially the same as induction roar
on a combustion engine.
--
Dan.
<michaeltnull@cybertrails.com> wrote:
>"Frank" <NOSPAM@NOSPAM.com> wrote in message
>news:43ca7fd4@usenet.zapto.org...
>> Hi there, fellow car enthusiasts!
>>
>> I am looking for a simple air compressor to do simple house work, nothing
>> too heavy duty. Also, I do not really need to have full continuous
>> operation as long it can ...
>My opinion is that a fractional hp unit is only useful for inflating tires.
>As mentioned, almost any compressor in the price range of ordinary people
>like us is ungodly loud.
I concur, though even inflating tires can be (haha) tiresome with a
small unit. Like many people, I bought a small compressor to start
with but rapidly found that I'd made a mistake.
I think my first one may have given acceptable performance with an
airbrush, or blowing up beach-***** and possibly bicycle tires.
I'm fortunate to live where there are no neighbo(u)rs within close
proximity. However, there are things you can do to muffle and contain
the noise, which is, I think, essentially the same as induction roar
on a combustion engine.
--
Dan.
#8
Guest
Posts: n/a
Re: Question on air compressor
Frank wrote:
> Hi there, fellow car enthusiasts!
>
> I am looking for a simple air compressor to do simple house work,
> nothing too heavy duty. Also, I do not really need to have full
> continuous operation as long it can spray a few things in, say,
> 15 to 20 seconds burst, like: deck stain (light oil base),
> oil-based rust proofing (like light oil Rust Check sold at
> Canadian Tire and elsewhere) and latex paint. I am not interested
> in using it for more powerful air tools.
>
> I am considering this air compressor from Canadian Tire. Would
> this do the job?
>
> Thanks again,
>
> http://www.canadiantire.ca/assortmen...romSearch=true
>
> If this link does not work, here are the details:
>
> Campbell Hausfeld 1/3-hp, 3-gallon Electric Air Compressor
> a.. 1/3-hp peak/3-gallon with 100-psi max
> a.. 120V
> a.. Pump: 3,000 rpm
> a.. 25' air hose with air chuck, one-touch coupler (1/4"),
> inflator gun, 2 inflation needles, inflation nozzle, Teflon pipe
> tape (32.8") and 2 male coupler (1/4") also included
> a.. Model No. 410788
>
>
I have the standup version of this:
http://www.canadiantire.ca/assortmen...=1137366797070
The belt drive are a lot quieter - I've painted my race car at midnight
and didn't wake up the house (I have an attached garage.)
I know it's a little (lot more) more than the one you were looking at,
but that's what I have. (My wonderful wife got it for me for xmas about
6 years ago.)
The small tank = compressor always running.
That type of compressor = really loud.
When in doubt, check the cfm of your sprayer and the cfm of the
compressor. Unless you like painting in 30 second bursts, you need more
compressor cfm than tool cfm (or close) or a BIG tank. BUt even a big
tank only means you have to stop less often so it can pump up, whereas a
powerful enough motor can keep the tank full.
Consider renting one from somewhere like Home Depot?
Ray
Ray
> Hi there, fellow car enthusiasts!
>
> I am looking for a simple air compressor to do simple house work,
> nothing too heavy duty. Also, I do not really need to have full
> continuous operation as long it can spray a few things in, say,
> 15 to 20 seconds burst, like: deck stain (light oil base),
> oil-based rust proofing (like light oil Rust Check sold at
> Canadian Tire and elsewhere) and latex paint. I am not interested
> in using it for more powerful air tools.
>
> I am considering this air compressor from Canadian Tire. Would
> this do the job?
>
> Thanks again,
>
> http://www.canadiantire.ca/assortmen...romSearch=true
>
> If this link does not work, here are the details:
>
> Campbell Hausfeld 1/3-hp, 3-gallon Electric Air Compressor
> a.. 1/3-hp peak/3-gallon with 100-psi max
> a.. 120V
> a.. Pump: 3,000 rpm
> a.. 25' air hose with air chuck, one-touch coupler (1/4"),
> inflator gun, 2 inflation needles, inflation nozzle, Teflon pipe
> tape (32.8") and 2 male coupler (1/4") also included
> a.. Model No. 410788
>
>
I have the standup version of this:
http://www.canadiantire.ca/assortmen...=1137366797070
The belt drive are a lot quieter - I've painted my race car at midnight
and didn't wake up the house (I have an attached garage.)
I know it's a little (lot more) more than the one you were looking at,
but that's what I have. (My wonderful wife got it for me for xmas about
6 years ago.)
The small tank = compressor always running.
That type of compressor = really loud.
When in doubt, check the cfm of your sprayer and the cfm of the
compressor. Unless you like painting in 30 second bursts, you need more
compressor cfm than tool cfm (or close) or a BIG tank. BUt even a big
tank only means you have to stop less often so it can pump up, whereas a
powerful enough motor can keep the tank full.
Consider renting one from somewhere like Home Depot?
Ray
Ray
#9
Guest
Posts: n/a
Re: Question on air compressor
On Sun, 15 Jan 2006 14:28:31 -0700, "Michael Pardee"
<michaeltnull@cybertrails.com> wrote:
<snip>
>My opinion is that a fractional hp unit is only useful for inflating tires.
>As mentioned, almost any compressor in the price range of ordinary people
>like us is ungodly loud. I have a Craftsman 3hp max / 1.5 hp running, 15
>gallon 8 cfm compressor in the garage. It requires hearing protection when
>it is running and the neighbors have asked what all the noise is, even
>though I keep the door closed while using it. All the noise comes from the
>unmuffled air intake. I've looked for ways to enclose the intake so I can
>muffle it, but I've seen nothing obvious yet.
>
>Mike
Have you thought about enclosing the whole unit in a wood framed box
that you insulate with inexpensive styrene or poly urethane foam
panels?
...Ron
--
68'RS Camaro
88'Formula
00'GT Mustang
<michaeltnull@cybertrails.com> wrote:
<snip>
>My opinion is that a fractional hp unit is only useful for inflating tires.
>As mentioned, almost any compressor in the price range of ordinary people
>like us is ungodly loud. I have a Craftsman 3hp max / 1.5 hp running, 15
>gallon 8 cfm compressor in the garage. It requires hearing protection when
>it is running and the neighbors have asked what all the noise is, even
>though I keep the door closed while using it. All the noise comes from the
>unmuffled air intake. I've looked for ways to enclose the intake so I can
>muffle it, but I've seen nothing obvious yet.
>
>Mike
Have you thought about enclosing the whole unit in a wood framed box
that you insulate with inexpensive styrene or poly urethane foam
panels?
...Ron
--
68'RS Camaro
88'Formula
00'GT Mustang
#10
Guest
Posts: n/a
Re: Question on air compressor
"RSCamaro" <rscamero@frontiernet.net> wrote in message
news:c0mls1lr71j5p8e91sbfd0hp6fr4n5vrcj@4ax.com...
> On Sun, 15 Jan 2006 14:28:31 -0700, "Michael Pardee"
> <michaeltnull@cybertrails.com> wrote:
>
> <snip>
> >My opinion is that a fractional hp unit is only useful for inflating
tires.
> >As mentioned, almost any compressor in the price range of ordinary people
> >like us is ungodly loud. I have a Craftsman 3hp max / 1.5 hp running, 15
> >gallon 8 cfm compressor in the garage. It requires hearing protection
when
> >it is running and the neighbors have asked what all the noise is, even
> >though I keep the door closed while using it. All the noise comes from
the
> >unmuffled air intake. I've looked for ways to enclose the intake so I can
> >muffle it, but I've seen nothing obvious yet.
> >
> >Mike
>
> Have you thought about enclosing the whole unit in a wood framed box
> that you insulate with inexpensive styrene or poly urethane foam
> panels?
>
Be careful of overheating your compressor this way.
--
-Mike-
mmarlowREMOVE@alltel.net
#11
Guest
Posts: n/a
Re: Question on air compressor
"Mike Marlow" <mmarlowREMOVE@alltel.net> wrote in message
news:74d2b$43cadd90$452896b0$9547@ALLTEL.NET...
>
> "RSCamaro" <rscamero@frontiernet.net> wrote in message
> news:c0mls1lr71j5p8e91sbfd0hp6fr4n5vrcj@4ax.com...
>> On Sun, 15 Jan 2006 14:28:31 -0700, "Michael Pardee"
>> <michaeltnull@cybertrails.com> wrote:
>>
>> <snip>
>> >My opinion is that a fractional hp unit is only useful for inflating
> tires.
>> >As mentioned, almost any compressor in the price range of ordinary
>> >people
>> >like us is ungodly loud. I have a Craftsman 3hp max / 1.5 hp running, 15
>> >gallon 8 cfm compressor in the garage. It requires hearing protection
> when
>> >it is running and the neighbors have asked what all the noise is, even
>> >though I keep the door closed while using it. All the noise comes from
> the
>> >unmuffled air intake. I've looked for ways to enclose the intake so I
>> >can
>> >muffle it, but I've seen nothing obvious yet.
>> >
>> >Mike
>>
>> Have you thought about enclosing the whole unit in a wood framed box
>> that you insulate with inexpensive styrene or poly urethane foam
>> panels?
>>
>
> Be careful of overheating your compressor this way.
>
That was a big concern - the motor generates a lot of heat.
I tore the unit down enough to get a look at the compressor, and it turns
out the intake is essentially the same space as the underside of the piston.
I didn't see any practical way to create an intake muffler, so I reassembled
everything. I am thinking of placing the compressor in the crawl space and
the tank in the garage, so the noise can be exiled while the maintenance of
the tank can be done in the garage, but I fear the noise will be into
the house if I'm not careful.
Mike
news:74d2b$43cadd90$452896b0$9547@ALLTEL.NET...
>
> "RSCamaro" <rscamero@frontiernet.net> wrote in message
> news:c0mls1lr71j5p8e91sbfd0hp6fr4n5vrcj@4ax.com...
>> On Sun, 15 Jan 2006 14:28:31 -0700, "Michael Pardee"
>> <michaeltnull@cybertrails.com> wrote:
>>
>> <snip>
>> >My opinion is that a fractional hp unit is only useful for inflating
> tires.
>> >As mentioned, almost any compressor in the price range of ordinary
>> >people
>> >like us is ungodly loud. I have a Craftsman 3hp max / 1.5 hp running, 15
>> >gallon 8 cfm compressor in the garage. It requires hearing protection
> when
>> >it is running and the neighbors have asked what all the noise is, even
>> >though I keep the door closed while using it. All the noise comes from
> the
>> >unmuffled air intake. I've looked for ways to enclose the intake so I
>> >can
>> >muffle it, but I've seen nothing obvious yet.
>> >
>> >Mike
>>
>> Have you thought about enclosing the whole unit in a wood framed box
>> that you insulate with inexpensive styrene or poly urethane foam
>> panels?
>>
>
> Be careful of overheating your compressor this way.
>
That was a big concern - the motor generates a lot of heat.
I tore the unit down enough to get a look at the compressor, and it turns
out the intake is essentially the same space as the underside of the piston.
I didn't see any practical way to create an intake muffler, so I reassembled
everything. I am thinking of placing the compressor in the crawl space and
the tank in the garage, so the noise can be exiled while the maintenance of
the tank can be done in the garage, but I fear the noise will be into
the house if I'm not careful.
Mike
#12
Guest
Posts: n/a
Re: Question on air compressor
"Frank" <NOSPAM@NOSPAM.com> wrote in message
news:43ca7fd4@usenet.zapto.org...
> Hi there, fellow car enthusiasts!
>
> I am looking for a simple air compressor to do simple house work,
> nothing too heavy duty. Also, I do not really need to have full
> continuous operation as long it can spray a few things in, say,
> 15 to 20 seconds burst, like: deck stain (light oil base),
> oil-based rust proofing (like light oil Rust Check sold at
> Canadian Tire and elsewhere) and latex paint. I am not interested
> in using it for more powerful air tools.
>
Sprayers take a lot of flow. If your wanting to spray stuff like that, just
buy an airless paint sprayer.
Heavy duty impact tools, by contrast, require high pressures and
you need a dual-stage compressor for that. For example I have
a 1 inch chuck impact tool. I rarely use it (very rarely) but it is
strong enough to break axle nuts free without having to jump up
and down on a cheater wondering if your going to snap your
breaker bar. However, 120psi is about the -minimum- it requires
to operate.
What the small compressors are sold for is running stuff like
nail guns, so you can use a nail gun to nail your new deck together.
But that's about all they are useful for.
Ted
> I am considering this air compressor from Canadian Tire. Would
> this do the job?
>
> Thanks again,
>
>
http://www.canadiantire.ca/assortmen...romSearch=true
>
> If this link does not work, here are the details:
>
> Campbell Hausfeld 1/3-hp, 3-gallon Electric Air Compressor
> a.. 1/3-hp peak/3-gallon with 100-psi max
> a.. 120V
> a.. Pump: 3,000 rpm
> a.. 25' air hose with air chuck, one-touch coupler (1/4"),
> inflator gun, 2 inflation needles, inflation nozzle, Teflon pipe
> tape (32.8") and 2 male coupler (1/4") also included
> a.. Model No. 410788
>
>
#13
Guest
Posts: n/a
Re: Question on air compressor
Michael Pardee wrote:
>
> "Mike Marlow" <mmarlowREMOVE@alltel.net> wrote in message
> news:74d2b$43cadd90$452896b0$9547@ALLTEL.NET...
> >
> > "RSCamaro" <rscamero@frontiernet.net> wrote in message
> > news:c0mls1lr71j5p8e91sbfd0hp6fr4n5vrcj@4ax.com...
> >> On Sun, 15 Jan 2006 14:28:31 -0700, "Michael Pardee"
> >> <michaeltnull@cybertrails.com> wrote:
> >>
> >> <snip>
> >> >My opinion is that a fractional hp unit is only useful for inflating
> > tires.
> >> >As mentioned, almost any compressor in the price range of ordinary
> >> >people
> >> >like us is ungodly loud. I have a Craftsman 3hp max / 1.5 hp running, 15
> >> >gallon 8 cfm compressor in the garage. It requires hearing protection
> > when
> >> >it is running and the neighbors have asked what all the noise is, even
> >> >though I keep the door closed while using it. All the noise comes from
> > the
> >> >unmuffled air intake. I've looked for ways to enclose the intake so I
> >> >can
> >> >muffle it, but I've seen nothing obvious yet.
> >> >
> >> >Mike
> >>
> >> Have you thought about enclosing the whole unit in a wood framed box
> >> that you insulate with inexpensive styrene or poly urethane foam
> >> panels?
> >>
> >
> > Be careful of overheating your compressor this way.
> >
>
> That was a big concern - the motor generates a lot of heat.
>
> I tore the unit down enough to get a look at the compressor, and it turns
> out the intake is essentially the same space as the underside of the piston.
> I didn't see any practical way to create an intake muffler, so I reassembled
> everything. I am thinking of placing the compressor in the crawl space and
> the tank in the garage, so the noise can be exiled while the maintenance of
> the tank can be done in the garage, but I fear the noise will be into
> the house if I'm not careful.
>
> Mike
A small auto muffler can be modified for air compressor usage. Did that
back east...
JT
#14
Guest
Posts: n/a
Re: Question on air compressor
"Grumpy AuContraire" <Grumpster@GrumpyvilleNOT.com> wrote in message
news:43CB8E73.9C13A704@GrumpyvilleNOT.com...
>
>
> A small auto muffler can be modified for air compressor usage. Did that
> back east...
>
> JT
Sounds like just the thing! How did you fit it to the compressor?
Mike
news:43CB8E73.9C13A704@GrumpyvilleNOT.com...
>
>
> A small auto muffler can be modified for air compressor usage. Did that
> back east...
>
> JT
Sounds like just the thing! How did you fit it to the compressor?
Mike
#15
Guest
Posts: n/a
Re: Question on air compressor
"Ted Mittelstaedt" <tedm@toybox.placo.com> wrote in message
news:newscache$dek6ti$r4w1$1@news.ipinc.net...
>
> "Frank" <NOSPAM@NOSPAM.com> wrote in message
> news:43ca7fd4@usenet.zapto.org...
>> Hi there, fellow car enthusiasts!
>>
>> I am looking for a simple air compressor to do simple house work,
>> nothing too heavy duty. Also, I do not really need to have full
>> continuous operation as long it can spray a few things in, say,
>> 15 to 20 seconds burst, like: deck stain (light oil base),
>> oil-based rust proofing (like light oil Rust Check sold at
>> Canadian Tire and elsewhere) and latex paint. I am not interested
>> in using it for more powerful air tools.
>>
>
> Sprayers take a lot of flow. If your wanting to spray stuff like that,
> just
> buy an airless paint sprayer.
>
> Heavy duty impact tools, by contrast, require high pressures and
> you need a dual-stage compressor for that. For example I have
> a 1 inch chuck impact tool. I rarely use it (very rarely) but it is
> strong enough to break axle nuts free without having to jump up
> and down on a cheater wondering if your going to snap your
> breaker bar. However, 120psi is about the -minimum- it requires
> to operate.
>
> What the small compressors are sold for is running stuff like
> nail guns, so you can use a nail gun to nail your new deck together.
> But that's about all they are useful for.
>
> Ted
>
Consumer quality compressors now have rating numbers, with a chart to show
what tools require. The 8 cfm 140 psi single stage noisemaker I have is
rated "4" and works the 1/2 inch impact tool I'm using, for the casual pace
I keep at home. It would be completely inadequate in a busy shop. It
struggles to keep up with a conventional spray gun and I haven't had the
nerve to try it with an HVLP sprayer.
To get rated impact out of any tool requires delivering rated pressure at
the tool, and 1/2 inch hose has a bunch of drop for air gobblers like that.
To get a crank bolt loose with the 500 ft-lb impact I had to put the
regulator right at the tool and run the hose at 120-140 psi. That did the
job, though. Axle nuts don't resist even with the regulator at the tank. I
don't know how I got along without it.
Mike
news:newscache$dek6ti$r4w1$1@news.ipinc.net...
>
> "Frank" <NOSPAM@NOSPAM.com> wrote in message
> news:43ca7fd4@usenet.zapto.org...
>> Hi there, fellow car enthusiasts!
>>
>> I am looking for a simple air compressor to do simple house work,
>> nothing too heavy duty. Also, I do not really need to have full
>> continuous operation as long it can spray a few things in, say,
>> 15 to 20 seconds burst, like: deck stain (light oil base),
>> oil-based rust proofing (like light oil Rust Check sold at
>> Canadian Tire and elsewhere) and latex paint. I am not interested
>> in using it for more powerful air tools.
>>
>
> Sprayers take a lot of flow. If your wanting to spray stuff like that,
> just
> buy an airless paint sprayer.
>
> Heavy duty impact tools, by contrast, require high pressures and
> you need a dual-stage compressor for that. For example I have
> a 1 inch chuck impact tool. I rarely use it (very rarely) but it is
> strong enough to break axle nuts free without having to jump up
> and down on a cheater wondering if your going to snap your
> breaker bar. However, 120psi is about the -minimum- it requires
> to operate.
>
> What the small compressors are sold for is running stuff like
> nail guns, so you can use a nail gun to nail your new deck together.
> But that's about all they are useful for.
>
> Ted
>
Consumer quality compressors now have rating numbers, with a chart to show
what tools require. The 8 cfm 140 psi single stage noisemaker I have is
rated "4" and works the 1/2 inch impact tool I'm using, for the casual pace
I keep at home. It would be completely inadequate in a busy shop. It
struggles to keep up with a conventional spray gun and I haven't had the
nerve to try it with an HVLP sprayer.
To get rated impact out of any tool requires delivering rated pressure at
the tool, and 1/2 inch hose has a bunch of drop for air gobblers like that.
To get a crank bolt loose with the 500 ft-lb impact I had to put the
regulator right at the tool and run the hose at 120-140 psi. That did the
job, though. Axle nuts don't resist even with the regulator at the tank. I
don't know how I got along without it.
Mike