I have an 96 honda accord lx nonvtec automatic. I have the tei distributor.
I am putting an ignition system in my car today its the accel 49310. Problem
is in the manual it says after my rotor is off to look for a red and white
wire that goes to the coil. Well I looked all ay at my distributor I even
have the icm out. I cannot find those wires anywhere in my distributor. The
wires I am looking for is a 12v+ power supply(ring terminal) and a Module
switched Signal(Flag terminal). The wires on the icm is a yellow/green,
black/yellow, green, and dark green. Theres also a blue wire somewhere in my
distributor. My haynes manual does not have my distributor in it.

 

amsjsj wrote:
> I have an 96 honda accord lx nonvtec automatic. I have the tei distributor.
> I am putting an ignition system in my car today its the accel 49310. Problem
> is in the manual it says after my rotor is off to look for a red and white
> wire that goes to the coil. Well I looked all ay at my distributor I even
> have the icm out. I cannot find those wires anywhere in my distributor. The
> wires I am looking for is a 12v+ power supply(ring terminal) and a Module
> switched Signal(Flag terminal). The wires on the icm is a yellow/green,
> black/yellow, green, and dark green. Theres also a blue wire somewhere in my
> distributor. My haynes manual does not have my distributor in it.
>
>
Hi,
How about calling Accel?
Tony

 

amsjsj wrote:
> I have an 96 honda accord lx nonvtec automatic. I have the tei distributor.
> I am putting an ignition system in my car today its the accel 49310. Problem
> is in the manual it says after my rotor is off to look for a red and white
> wire that goes to the coil. Well I looked all ay at my distributor I even
> have the icm out. I cannot find those wires anywhere in my distributor. The
> wires I am looking for is a 12v+ power supply(ring terminal) and a Module
> switched Signal(Flag terminal). The wires on the icm is a yellow/green,
> black/yellow, green, and dark green. Theres also a blue wire somewhere in my
> distributor. My haynes manual does not have my distributor in it.
>
>
Hi,
How about calling Accel?
Tony

 

amsjsj wrote:
> I have an 96 honda accord lx nonvtec automatic. I have the tei distributor.
> I am putting an ignition system in my car today its the accel 49310. Problem
> is in the manual it says after my rotor is off to look for a red and white
> wire that goes to the coil. Well I looked all ay at my distributor I even
> have the icm out. I cannot find those wires anywhere in my distributor. The
> wires I am looking for is a 12v+ power supply(ring terminal) and a Module
> switched Signal(Flag terminal). The wires on the icm is a yellow/green,
> black/yellow, green, and dark green. Theres also a blue wire somewhere in my
> distributor. My haynes manual does not have my distributor in it.
>
>
Hi,
How about calling Accel?
Tony

 

amsjsj wrote:
> I have an 96 honda accord lx nonvtec automatic. I have the tei distributor.
> I am putting an ignition system in my car today its the accel 49310. Problem
> is in the manual it says after my rotor is off to look for a red and white
> wire that goes to the coil. Well I looked all ay at my distributor I even
> have the icm out. I cannot find those wires anywhere in my distributor. The
> wires I am looking for is a 12v+ power supply(ring terminal) and a Module
> switched Signal(Flag terminal). The wires on the icm is a yellow/green,
> black/yellow, green, and dark green. Theres also a blue wire somewhere in my
> distributor. My haynes manual does not have my distributor in it.
>
>
Hi,
How about calling Accel?
Tony

 

i guess that means you dont know, also accel isnt open on weekends, or i
wouldve.

"Tony Hwang" <dragon40@shaw.ca> wrote in message
news:iT70c.643812$ts4.521145@pd7tw3no...
> amsjsj wrote:
> > I have an 96 honda accord lx nonvtec automatic. I have the tei
distributor.
> > I am putting an ignition system in my car today its the accel 49310.
Problem
> > is in the manual it says after my rotor is off to look for a red and
white
> > wire that goes to the coil. Well I looked all ay at my distributor I
even
> > have the icm out. I cannot find those wires anywhere in my distributor.
The
> > wires I am looking for is a 12v+ power supply(ring terminal) and a
Module
> > switched Signal(Flag terminal). The wires on the icm is a yellow/green,
> > black/yellow, green, and dark green. Theres also a blue wire somewhere
in my
> > distributor. My haynes manual does not have my distributor in it.
> >
> >
> Hi,
> How about calling Accel?
> Tony

 

i guess that means you dont know, also accel isnt open on weekends, or i
wouldve.

"Tony Hwang" <dragon40@shaw.ca> wrote in message
news:iT70c.643812$ts4.521145@pd7tw3no...
> amsjsj wrote:
> > I have an 96 honda accord lx nonvtec automatic. I have the tei
distributor.
> > I am putting an ignition system in my car today its the accel 49310.
Problem
> > is in the manual it says after my rotor is off to look for a red and
white
> > wire that goes to the coil. Well I looked all ay at my distributor I
even
> > have the icm out. I cannot find those wires anywhere in my distributor.
The
> > wires I am looking for is a 12v+ power supply(ring terminal) and a
Module
> > switched Signal(Flag terminal). The wires on the icm is a yellow/green,
> > black/yellow, green, and dark green. Theres also a blue wire somewhere
in my
> > distributor. My haynes manual does not have my distributor in it.
> >
> >
> Hi,
> How about calling Accel?
> Tony

 

i guess that means you dont know, also accel isnt open on weekends, or i
wouldve.

"Tony Hwang" <dragon40@shaw.ca> wrote in message
news:iT70c.643812$ts4.521145@pd7tw3no...
> amsjsj wrote:
> > I have an 96 honda accord lx nonvtec automatic. I have the tei
distributor.
> > I am putting an ignition system in my car today its the accel 49310.
Problem
> > is in the manual it says after my rotor is off to look for a red and
white
> > wire that goes to the coil. Well I looked all ay at my distributor I
even
> > have the icm out. I cannot find those wires anywhere in my distributor.
The
> > wires I am looking for is a 12v+ power supply(ring terminal) and a
Module
> > switched Signal(Flag terminal). The wires on the icm is a yellow/green,
> > black/yellow, green, and dark green. Theres also a blue wire somewhere
in my
> > distributor. My haynes manual does not have my distributor in it.
> >
> >
> Hi,
> How about calling Accel?
> Tony

 

i guess that means you dont know, also accel isnt open on weekends, or i
wouldve.

"Tony Hwang" <dragon40@shaw.ca> wrote in message
news:iT70c.643812$ts4.521145@pd7tw3no...
> amsjsj wrote:
> > I have an 96 honda accord lx nonvtec automatic. I have the tei
distributor.
> > I am putting an ignition system in my car today its the accel 49310.
Problem
> > is in the manual it says after my rotor is off to look for a red and
white
> > wire that goes to the coil. Well I looked all ay at my distributor I
even
> > have the icm out. I cannot find those wires anywhere in my distributor.
The
> > wires I am looking for is a 12v+ power supply(ring terminal) and a
Module
> > switched Signal(Flag terminal). The wires on the icm is a yellow/green,
> > black/yellow, green, and dark green. Theres also a blue wire somewhere
in my
> > distributor. My haynes manual does not have my distributor in it.
> >
> >
> Hi,
> How about calling Accel?
> Tony