Neret Part: CR-V Sunglass Holder
#1
Guest
Posts: n/a
Neret Part: CR-V Sunglass Holder
Actually, I just need a little black cog which prevents the sunglass
holder from dropping fast. It is connected to the starboard side of
the Sunglass/Maplight Assembly.
The cog is about 1/4" ~ 3/8" in diameter and is just mounted on a post
with enough friction to make it rotate slow. It clips into the assy.
I spoke to my local Honda dealer and he says that I have to buy the
entire assy.
Anyone have a source for this small part?
-Alex
axraupp@hotmail.com
lcason@mninter.net
holder from dropping fast. It is connected to the starboard side of
the Sunglass/Maplight Assembly.
The cog is about 1/4" ~ 3/8" in diameter and is just mounted on a post
with enough friction to make it rotate slow. It clips into the assy.
I spoke to my local Honda dealer and he says that I have to buy the
entire assy.
Anyone have a source for this small part?
-Alex
axraupp@hotmail.com
lcason@mninter.net
#2
Guest
Posts: n/a
Re: Neret Part: CR-V Sunglass Holder
On Jun 17, 2:05 pm, alex <axra...@hotmail.com> wrote:
> Actually, I just need a little black cog which prevents the sunglass
> holder from dropping fast. It is connected to the starboard side of
> the Sunglass/Maplight Assembly.
>
> The cog is about 1/4" ~ 3/8" in diameter and is just mounted on a post
> with enough friction to make it rotate slow. It clips into the assy.
>
> I spoke to my local Honda dealer and he says that I have to buy the
> entire assy.
>
> Anyone have a source for this small part?
>
> -Alex
> axra...@hotmail.com
> lca...@mninter.net
Junkyard.
Dan D
'07 Ody EX
Central NJ USA
> Actually, I just need a little black cog which prevents the sunglass
> holder from dropping fast. It is connected to the starboard side of
> the Sunglass/Maplight Assembly.
>
> The cog is about 1/4" ~ 3/8" in diameter and is just mounted on a post
> with enough friction to make it rotate slow. It clips into the assy.
>
> I spoke to my local Honda dealer and he says that I have to buy the
> entire assy.
>
> Anyone have a source for this small part?
>
> -Alex
> axra...@hotmail.com
> lca...@mninter.net
Junkyard.
Dan D
'07 Ody EX
Central NJ USA
#3
Guest
Posts: n/a
Re: Neret Part: CR-V Sunglass Holder
On 6/17/09 1:05 PM, in article nhbi35995lk91norsdpi3bnfptiqbsmodi@4ax.com,
"alex" <axraupp@hotmail.com> wrote:
> Actually, I just need a little black cog which prevents the sunglass
> holder from dropping fast. It is connected to the starboard side of
> the Sunglass/Maplight Assembly.
>
> The cog is about 1/4" ~ 3/8" in diameter and is just mounted on a post
> with enough friction to make it rotate slow. It clips into the assy.
>
> I spoke to my local Honda dealer and he says that I have to buy the
> entire assy.
>
> Anyone have a source for this small part?
>
> -Alex
> axraupp@hotmail.com
> lcason@mninter.net
Don't know what year your CR-V is, but as of the '06 model year (the year of
my CR-V) there were only two different models of the sunglass holder & they
have interchangeable parts. You can also use the ones with the built in
homelink if you want.
I upgraded mine on ebay for $20 to get the homelink, but for your purposes,
you should be able to get the part you need from virtually any Honda you
find in the junkyard that has a sunglass holder.
Now if your CR-V is '07 or newer, YMMV, but I would still start at the
junkyard.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)