"Newhope via CarKB.com" <u18620@uwe> wrote in message
news:66b245fd53e79@uwe...
> Update info. to Seth and Michael,
>
> This afternoon, when I was ready to go home, I started the engine, the MIL
> did not appear anymore. I thought something went wrong. However, I kept
> checking if it went back on again, from time to time, the light did not go
> back on again. all the way of criving home (about 45 miles one way)
>
> As per your advice, I stopped by at a part store (Farm and Auto suppy
> store),
> to get the code, read from the computer.
> The code is P0706.

P0706 Open in Transmission Range Switch Circuit

What that means, /I/ don't know, but whomever does I am sure will chime in.
I gi\oogled for that code and found many lists that give that same 1-line
description, but no further explanation.


> ( I had read it from the equipment which is hooked into my car, under the
> dashboard, on the right hand side of driver seat, however, when the
> technician hooked this equipment to the computer system to print out its
> report, there is no code, no information on this report).
>
> The techinician informed me that I should keep an eye if it comes on again
> then let him know.
> He also explained to me that because the light did not came on when he
> checked, therefore, he expected there is nothing wrong with my car.
> Do you have any ideas?
>
> I had made an appt. with Honda (Greg May Honda in Waco, TX) on Monday,
> Sept
> 25, at 4Pm.
> So please advice me.

 

The transmission range switch is on the side of the transmission and feeds a
signal back to the computer as to which gear it is switched to. As you move
the column control it moves the switch. It is possible some foreign material
got under the switch and cleared when you moved the shifter. The switch also
feeds the light showing the gear it is in. Observe those if it fails again.
The parts tech's system may not have printed out anything because the mil
wasn't on. However the code and all relevant information is stored in the
freeze frame in the computer and can be accessed.


"Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
news:sf0Rg.53$8V2.17@newsfe08.lga...
> "Newhope via CarKB.com" <u18620@uwe> wrote in message
> news:66b245fd53e79@uwe...
>> Update info. to Seth and Michael,
>>
>> This afternoon, when I was ready to go home, I started the engine, the
>> MIL
>> did not appear anymore. I thought something went wrong. However, I kept
>> checking if it went back on again, from time to time, the light did not
>> go
>> back on again. all the way of criving home (about 45 miles one way)
>>
>> As per your advice, I stopped by at a part store (Farm and Auto suppy
>> store),
>> to get the code, read from the computer.
>> The code is P0706.
>
> P0706 Open in Transmission Range Switch Circuit
>
> What that means, /I/ don't know, but whomever does I am sure will chime
> in. I gi\oogled for that code and found many lists that give that same
> 1-line description, but no further explanation.
>
>
>> ( I had read it from the equipment which is hooked into my car, under the
>> dashboard, on the right hand side of driver seat, however, when the
>> technician hooked this equipment to the computer system to print out its
>> report, there is no code, no information on this report).
>>
>> The techinician informed me that I should keep an eye if it comes on
>> again
>> then let him know.
>> He also explained to me that because the light did not came on when he
>> checked, therefore, he expected there is nothing wrong with my car.
>> Do you have any ideas?
>>
>> I had made an appt. with Honda (Greg May Honda in Waco, TX) on Monday,
>> Sept
>> 25, at 4Pm.
>> So please advice me.
>
>

 

The transmission range switch is on the side of the transmission and feeds a
signal back to the computer as to which gear it is switched to. As you move
the column control it moves the switch. It is possible some foreign material
got under the switch and cleared when you moved the shifter. The switch also
feeds the light showing the gear it is in. Observe those if it fails again.
The parts tech's system may not have printed out anything because the mil
wasn't on. However the code and all relevant information is stored in the
freeze frame in the computer and can be accessed.


"Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
news:sf0Rg.53$8V2.17@newsfe08.lga...
> "Newhope via CarKB.com" <u18620@uwe> wrote in message
> news:66b245fd53e79@uwe...
>> Update info. to Seth and Michael,
>>
>> This afternoon, when I was ready to go home, I started the engine, the
>> MIL
>> did not appear anymore. I thought something went wrong. However, I kept
>> checking if it went back on again, from time to time, the light did not
>> go
>> back on again. all the way of criving home (about 45 miles one way)
>>
>> As per your advice, I stopped by at a part store (Farm and Auto suppy
>> store),
>> to get the code, read from the computer.
>> The code is P0706.
>
> P0706 Open in Transmission Range Switch Circuit
>
> What that means, /I/ don't know, but whomever does I am sure will chime
> in. I gi\oogled for that code and found many lists that give that same
> 1-line description, but no further explanation.
>
>
>> ( I had read it from the equipment which is hooked into my car, under the
>> dashboard, on the right hand side of driver seat, however, when the
>> technician hooked this equipment to the computer system to print out its
>> report, there is no code, no information on this report).
>>
>> The techinician informed me that I should keep an eye if it comes on
>> again
>> then let him know.
>> He also explained to me that because the light did not came on when he
>> checked, therefore, he expected there is nothing wrong with my car.
>> Do you have any ideas?
>>
>> I had made an appt. with Honda (Greg May Honda in Waco, TX) on Monday,
>> Sept
>> 25, at 4Pm.
>> So please advice me.
>
>

 

The transmission range switch is on the side of the transmission and feeds a
signal back to the computer as to which gear it is switched to. As you move
the column control it moves the switch. It is possible some foreign material
got under the switch and cleared when you moved the shifter. The switch also
feeds the light showing the gear it is in. Observe those if it fails again.
The parts tech's system may not have printed out anything because the mil
wasn't on. However the code and all relevant information is stored in the
freeze frame in the computer and can be accessed.


"Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
news:sf0Rg.53$8V2.17@newsfe08.lga...
> "Newhope via CarKB.com" <u18620@uwe> wrote in message
> news:66b245fd53e79@uwe...
>> Update info. to Seth and Michael,
>>
>> This afternoon, when I was ready to go home, I started the engine, the
>> MIL
>> did not appear anymore. I thought something went wrong. However, I kept
>> checking if it went back on again, from time to time, the light did not
>> go
>> back on again. all the way of criving home (about 45 miles one way)
>>
>> As per your advice, I stopped by at a part store (Farm and Auto suppy
>> store),
>> to get the code, read from the computer.
>> The code is P0706.
>
> P0706 Open in Transmission Range Switch Circuit
>
> What that means, /I/ don't know, but whomever does I am sure will chime
> in. I gi\oogled for that code and found many lists that give that same
> 1-line description, but no further explanation.
>
>
>> ( I had read it from the equipment which is hooked into my car, under the
>> dashboard, on the right hand side of driver seat, however, when the
>> technician hooked this equipment to the computer system to print out its
>> report, there is no code, no information on this report).
>>
>> The techinician informed me that I should keep an eye if it comes on
>> again
>> then let him know.
>> He also explained to me that because the light did not came on when he
>> checked, therefore, he expected there is nothing wrong with my car.
>> Do you have any ideas?
>>
>> I had made an appt. with Honda (Greg May Honda in Waco, TX) on Monday,
>> Sept
>> 25, at 4Pm.
>> So please advice me.
>
>