I have wear on the inner halves of both my front tires(Kumho Exsta 712).
Alignment,ball joint,or struts? Or other problem?

--
Jim Yanik
jyanik
at
kua.net

 

Jim Yanik wrote:
> I have wear on the inner halves of both my front tires(Kumho Exsta 712).
> Alignment,ball joint,or struts? Or other problem?
>
alignment. struts don't make that kind of wear on an integra because of
the wishbones.

check the bushings as well. ball joints would have to be /well/ gone to
make a difference.

 

Jim Yanik wrote:
> I have wear on the inner halves of both my front tires(Kumho Exsta 712).
> Alignment,ball joint,or struts? Or other problem?
>
alignment. struts don't make that kind of wear on an integra because of
the wishbones.

check the bushings as well. ball joints would have to be /well/ gone to
make a difference.

 

Jim Yanik wrote:
> I have wear on the inner halves of both my front tires(Kumho Exsta 712).
> Alignment,ball joint,or struts? Or other problem?
>
alignment. struts don't make that kind of wear on an integra because of
the wishbones.

check the bushings as well. ball joints would have to be /well/ gone to
make a difference.

 

jim beam <nospam@example.net> wrote in news8adnZ_6Tu08x_vZRVn-
tQ@speakeasy.net:

> Jim Yanik wrote:
>> I have wear on the inner halves of both my front tires(Kumho Ecsta 712).
>> Alignment,ball joint,or struts? Or other problem?
>>
> alignment. struts don't make that kind of wear on an integra because of
> the wishbones.
>
> check the bushings as well. ball joints would have to be /well/ gone to
> make a difference.
>

The car is a 1994,not hit any potholes or any thing that might knock out
alignment,mileage is 56,000 mi.,car lived entire life in Florida heat.
I do like to corner hard.

I could see bushings getting old considering the heat here.

--
Jim Yanik
jyanik
at
kua.net

 

jim beam <nospam@example.net> wrote in news8adnZ_6Tu08x_vZRVn-
tQ@speakeasy.net:

> Jim Yanik wrote:
>> I have wear on the inner halves of both my front tires(Kumho Ecsta 712).
>> Alignment,ball joint,or struts? Or other problem?
>>
> alignment. struts don't make that kind of wear on an integra because of
> the wishbones.
>
> check the bushings as well. ball joints would have to be /well/ gone to
> make a difference.
>

The car is a 1994,not hit any potholes or any thing that might knock out
alignment,mileage is 56,000 mi.,car lived entire life in Florida heat.
I do like to corner hard.

I could see bushings getting old considering the heat here.

--
Jim Yanik
jyanik
at
kua.net

 

jim beam <nospam@example.net> wrote in news8adnZ_6Tu08x_vZRVn-
tQ@speakeasy.net:

> Jim Yanik wrote:
>> I have wear on the inner halves of both my front tires(Kumho Ecsta 712).
>> Alignment,ball joint,or struts? Or other problem?
>>
> alignment. struts don't make that kind of wear on an integra because of
> the wishbones.
>
> check the bushings as well. ball joints would have to be /well/ gone to
> make a difference.
>

The car is a 1994,not hit any potholes or any thing that might knock out
alignment,mileage is 56,000 mi.,car lived entire life in Florida heat.
I do like to corner hard.

I could see bushings getting old considering the heat here.

--
Jim Yanik
jyanik
at
kua.net

 

Jim Yanik wrote:
> jim beam <nospam@example.net> wrote in news8adnZ_6Tu08x_vZRVn-
> tQ@speakeasy.net:
>
>
>>Jim Yanik wrote:
>>
>>>I have wear on the inner halves of both my front tires(Kumho Ecsta 712).
>>>Alignment,ball joint,or struts? Or other problem?
>>>
>>
>>alignment. struts don't make that kind of wear on an integra because of
>>the wishbones.
>>
>>check the bushings as well. ball joints would have to be /well/ gone to
>>make a difference.
>>
>
>
> The car is a 1994,not hit any potholes or any thing that might knock out
> alignment,mileage is 56,000 mi.,car lived entire life in Florida heat.
> I do like to corner hard.
>
> I could see bushings getting old considering the heat here.
>
are you sure it was never done by the tire shop? no joking, i must have
had my civic aligned 7 or 8 times before i finally found someone who
could actually use the equipment properly. 4-wheel alignment on this
kind of suspension seems way beyond most people.

and apparently, the rear alignment spec is missing from a number of the
reference books used by the alignment shops - as evidenced by the last
guy that did mine. i was very specific about what i wanted and he came
back to say he couldn't do the rear like i'd asked because the book said
it was not adjustable. i knew the spec and showed him what to do, and
he did an excellent job after that, but seriously, if he was just
following the normal "book" alignment procedure, i'd have left the shop
with yet another bad alignment just like before.

now, i have great alignment, great handling and most important, even
tire wear. honda knew their business - these cars line up just great
when done right. oh, and one last thing. make sure the front is lined
up "both wheels straight ahead". good for tire wear and slightly better
cornering. i swear some shops like to give excess toe to increase tire
wear and get you back again sooner.

 

Jim Yanik wrote:
> jim beam <nospam@example.net> wrote in news8adnZ_6Tu08x_vZRVn-
> tQ@speakeasy.net:
>
>
>>Jim Yanik wrote:
>>
>>>I have wear on the inner halves of both my front tires(Kumho Ecsta 712).
>>>Alignment,ball joint,or struts? Or other problem?
>>>
>>
>>alignment. struts don't make that kind of wear on an integra because of
>>the wishbones.
>>
>>check the bushings as well. ball joints would have to be /well/ gone to
>>make a difference.
>>
>
>
> The car is a 1994,not hit any potholes or any thing that might knock out
> alignment,mileage is 56,000 mi.,car lived entire life in Florida heat.
> I do like to corner hard.
>
> I could see bushings getting old considering the heat here.
>
are you sure it was never done by the tire shop? no joking, i must have
had my civic aligned 7 or 8 times before i finally found someone who
could actually use the equipment properly. 4-wheel alignment on this
kind of suspension seems way beyond most people.

and apparently, the rear alignment spec is missing from a number of the
reference books used by the alignment shops - as evidenced by the last
guy that did mine. i was very specific about what i wanted and he came
back to say he couldn't do the rear like i'd asked because the book said
it was not adjustable. i knew the spec and showed him what to do, and
he did an excellent job after that, but seriously, if he was just
following the normal "book" alignment procedure, i'd have left the shop
with yet another bad alignment just like before.

now, i have great alignment, great handling and most important, even
tire wear. honda knew their business - these cars line up just great
when done right. oh, and one last thing. make sure the front is lined
up "both wheels straight ahead". good for tire wear and slightly better
cornering. i swear some shops like to give excess toe to increase tire
wear and get you back again sooner.

 

Jim Yanik wrote:
> jim beam <nospam@example.net> wrote in news8adnZ_6Tu08x_vZRVn-
> tQ@speakeasy.net:
>
>
>>Jim Yanik wrote:
>>
>>>I have wear on the inner halves of both my front tires(Kumho Ecsta 712).
>>>Alignment,ball joint,or struts? Or other problem?
>>>
>>
>>alignment. struts don't make that kind of wear on an integra because of
>>the wishbones.
>>
>>check the bushings as well. ball joints would have to be /well/ gone to
>>make a difference.
>>
>
>
> The car is a 1994,not hit any potholes or any thing that might knock out
> alignment,mileage is 56,000 mi.,car lived entire life in Florida heat.
> I do like to corner hard.
>
> I could see bushings getting old considering the heat here.
>
are you sure it was never done by the tire shop? no joking, i must have
had my civic aligned 7 or 8 times before i finally found someone who
could actually use the equipment properly. 4-wheel alignment on this
kind of suspension seems way beyond most people.

and apparently, the rear alignment spec is missing from a number of the
reference books used by the alignment shops - as evidenced by the last
guy that did mine. i was very specific about what i wanted and he came
back to say he couldn't do the rear like i'd asked because the book said
it was not adjustable. i knew the spec and showed him what to do, and
he did an excellent job after that, but seriously, if he was just
following the normal "book" alignment procedure, i'd have left the shop
with yet another bad alignment just like before.

now, i have great alignment, great handling and most important, even
tire wear. honda knew their business - these cars line up just great
when done right. oh, and one last thing. make sure the front is lined
up "both wheels straight ahead". good for tire wear and slightly better
cornering. i swear some shops like to give excess toe to increase tire
wear and get you back again sooner.

 

Jim Yanik wrote:
> jim beam <nospam@example.net> wrote in news8adnZ_6Tu08x_vZRVn-
> tQ@speakeasy.net:
>
>
>>Jim Yanik wrote:
>>
>>>I have wear on the inner halves of both my front tires(Kumho Ecsta 712).
>>>Alignment,ball joint,or struts? Or other problem?
>>>
>>
>>alignment. struts don't make that kind of wear on an integra because of
>>the wishbones.
>>
>>check the bushings as well. ball joints would have to be /well/ gone to
>>make a difference.
>>
>
>
> The car is a 1994,not hit any potholes or any thing that might knock out
> alignment,mileage is 56,000 mi.,car lived entire life in Florida heat.
> I do like to corner hard.
>
> I could see bushings getting old considering the heat here.

Is it lowered? Aftermarket or cut springs perhaps? Doing that without
properly compensating will create enormous negative camber and cause
that kind of nasty inner tire wear.


---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 0619-3, 05/12/2006
Tested on: 5/13/2006 6:42:31 PM
avast! - copyright (c) 1988-2006 ALWIL Software.
http://www.avast.com

 

Jim Yanik wrote:
> jim beam <nospam@example.net> wrote in news8adnZ_6Tu08x_vZRVn-
> tQ@speakeasy.net:
>
>
>>Jim Yanik wrote:
>>
>>>I have wear on the inner halves of both my front tires(Kumho Ecsta 712).
>>>Alignment,ball joint,or struts? Or other problem?
>>>
>>
>>alignment. struts don't make that kind of wear on an integra because of
>>the wishbones.
>>
>>check the bushings as well. ball joints would have to be /well/ gone to
>>make a difference.
>>
>
>
> The car is a 1994,not hit any potholes or any thing that might knock out
> alignment,mileage is 56,000 mi.,car lived entire life in Florida heat.
> I do like to corner hard.
>
> I could see bushings getting old considering the heat here.

Is it lowered? Aftermarket or cut springs perhaps? Doing that without
properly compensating will create enormous negative camber and cause
that kind of nasty inner tire wear.


---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 0619-3, 05/12/2006
Tested on: 5/13/2006 6:42:31 PM
avast! - copyright (c) 1988-2006 ALWIL Software.
http://www.avast.com

 

Jim Yanik wrote:
> jim beam <nospam@example.net> wrote in news8adnZ_6Tu08x_vZRVn-
> tQ@speakeasy.net:
>
>
>>Jim Yanik wrote:
>>
>>>I have wear on the inner halves of both my front tires(Kumho Ecsta 712).
>>>Alignment,ball joint,or struts? Or other problem?
>>>
>>
>>alignment. struts don't make that kind of wear on an integra because of
>>the wishbones.
>>
>>check the bushings as well. ball joints would have to be /well/ gone to
>>make a difference.
>>
>
>
> The car is a 1994,not hit any potholes or any thing that might knock out
> alignment,mileage is 56,000 mi.,car lived entire life in Florida heat.
> I do like to corner hard.
>
> I could see bushings getting old considering the heat here.

Is it lowered? Aftermarket or cut springs perhaps? Doing that without
properly compensating will create enormous negative camber and cause
that kind of nasty inner tire wear.


---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 0619-3, 05/12/2006
Tested on: 5/13/2006 6:42:31 PM
avast! - copyright (c) 1988-2006 ALWIL Software.
http://www.avast.com

 

"Jim Yanik" <jyanik@abuse.gov> wrote in message
news:Xns97C27A751C2E4jyanikkuanet@129.250.170.84.. .
>I have wear on the inner halves of both my front tires(Kumho Exsta 712).
> Alignment,ball joint,or struts? Or other problem?
>
> --
> Jim Yanik
> jyanik
> at
> kua.net

Jim,
Definitely sounds like alignment problem. If the wear is equal all the way
around the inner circumference of the tire (no hills and valleys so to
speak), then one or two adjustment angles are out of specs. Either camber
(top of tire leaning in toward the car too much) or toe is too far out. You
didn't mention any handling quirks so I would assume that camber is the
problem, predominately. Another check is to closely examine the tire wear
and look for "feathering" toward the outer edge of the tire. Caused by the
tire sliding while it is rolling. This would indicate a toe problem. I would
have thought that you would have felt some steering and handling problem if
this was the case however. Time for an alignment. Be sure the shop
thoroughly inspects the front end for worn, wearing, or damaged parts before
doing the alignment. Cheers.

Dave D

 

"Jim Yanik" <jyanik@abuse.gov> wrote in message
news:Xns97C27A751C2E4jyanikkuanet@129.250.170.84.. .
>I have wear on the inner halves of both my front tires(Kumho Exsta 712).
> Alignment,ball joint,or struts? Or other problem?
>
> --
> Jim Yanik
> jyanik
> at
> kua.net

Jim,
Definitely sounds like alignment problem. If the wear is equal all the way
around the inner circumference of the tire (no hills and valleys so to
speak), then one or two adjustment angles are out of specs. Either camber
(top of tire leaning in toward the car too much) or toe is too far out. You
didn't mention any handling quirks so I would assume that camber is the
problem, predominately. Another check is to closely examine the tire wear
and look for "feathering" toward the outer edge of the tire. Caused by the
tire sliding while it is rolling. This would indicate a toe problem. I would
have thought that you would have felt some steering and handling problem if
this was the case however. Time for an alignment. Be sure the shop
thoroughly inspects the front end for worn, wearing, or damaged parts before
doing the alignment. Cheers.

Dave D