How to test MAP Sensor on 1997 Honda Civic LX
07-30-2006 | 06:49 PM
#1
Guest
Posts: n/a
How to test MAP Sensor on 1997 Honda Civic LX
I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
need to do a smog check. The error code is 5, MAP Sensor (Manifold
Absolute Pressure) mechanical problem. How do I test the sensor (or any
web-link)? I want to make sure it is the problem on the MAP sensor
before I replace it with a new one.
There is 3 wires go into the sensor Yellow, Green, and Red. Look like
the the Red and Green come from the sensor below the air filter. Can I
check the voltage on the Yellow and see if it vary when I rev the
engine? What would be the voltage range and where do I put the voltage
ground? Also any link to sensor specification would really be
appriciated.
Is it possible that the problem is not on the MAP Sensor? If so what
can cause the error code 5?
Thanks in Advance
Don
need to do a smog check. The error code is 5, MAP Sensor (Manifold
Absolute Pressure) mechanical problem. How do I test the sensor (or any
web-link)? I want to make sure it is the problem on the MAP sensor
before I replace it with a new one.
There is 3 wires go into the sensor Yellow, Green, and Red. Look like
the the Red and Green come from the sensor below the air filter. Can I
check the voltage on the Yellow and see if it vary when I rev the
engine? What would be the voltage range and where do I put the voltage
ground? Also any link to sensor specification would really be
appriciated.
Is it possible that the problem is not on the MAP Sensor? If so what
can cause the error code 5?
Thanks in Advance
Don
07-31-2006 | 03:53 AM
#2
Guest
Posts: n/a
Re: How to test MAP Sensor on 1997 Honda Civic LX
"Don" <dsuwanna@yahoo.com> wrote in
news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
> I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> need to do a smog check. The error code is 5, MAP Sensor (Manifold
> Absolute Pressure) mechanical problem. How do I test the sensor (or any
> web-link)? I want to make sure it is the problem on the MAP sensor
> before I replace it with a new one.
First of all, don't rely on the MIL-flash for your code. It will show
Code 5 for FIVE different OBD-II errors:
P0106 - MAP Sensor range/performance problem
P0107 - MAP Sensor low-voltage (high vacuum) problem
P0108 - MAP Sensor high-voltage (low vacuum) problem
P1128 - MAP lower than expected
P1129 - MAP higher than expected
You need to have the code read properly using an OBD-II tester. Testing of
this component is beyond the average home mechanic, besides replacment of
the vacuum hose.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
> I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> need to do a smog check. The error code is 5, MAP Sensor (Manifold
> Absolute Pressure) mechanical problem. How do I test the sensor (or any
> web-link)? I want to make sure it is the problem on the MAP sensor
> before I replace it with a new one.
First of all, don't rely on the MIL-flash for your code. It will show
Code 5 for FIVE different OBD-II errors:
P0106 - MAP Sensor range/performance problem
P0107 - MAP Sensor low-voltage (high vacuum) problem
P0108 - MAP Sensor high-voltage (low vacuum) problem
P1128 - MAP lower than expected
P1129 - MAP higher than expected
You need to have the code read properly using an OBD-II tester. Testing of
this component is beyond the average home mechanic, besides replacment of
the vacuum hose.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
07-31-2006 | 03:53 AM
#3
Guest
Posts: n/a
Re: How to test MAP Sensor on 1997 Honda Civic LX
"Don" <dsuwanna@yahoo.com> wrote in
news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
> I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> need to do a smog check. The error code is 5, MAP Sensor (Manifold
> Absolute Pressure) mechanical problem. How do I test the sensor (or any
> web-link)? I want to make sure it is the problem on the MAP sensor
> before I replace it with a new one.
First of all, don't rely on the MIL-flash for your code. It will show
Code 5 for FIVE different OBD-II errors:
P0106 - MAP Sensor range/performance problem
P0107 - MAP Sensor low-voltage (high vacuum) problem
P0108 - MAP Sensor high-voltage (low vacuum) problem
P1128 - MAP lower than expected
P1129 - MAP higher than expected
You need to have the code read properly using an OBD-II tester. Testing of
this component is beyond the average home mechanic, besides replacment of
the vacuum hose.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
> I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> need to do a smog check. The error code is 5, MAP Sensor (Manifold
> Absolute Pressure) mechanical problem. How do I test the sensor (or any
> web-link)? I want to make sure it is the problem on the MAP sensor
> before I replace it with a new one.
First of all, don't rely on the MIL-flash for your code. It will show
Code 5 for FIVE different OBD-II errors:
P0106 - MAP Sensor range/performance problem
P0107 - MAP Sensor low-voltage (high vacuum) problem
P0108 - MAP Sensor high-voltage (low vacuum) problem
P1128 - MAP lower than expected
P1129 - MAP higher than expected
You need to have the code read properly using an OBD-II tester. Testing of
this component is beyond the average home mechanic, besides replacment of
the vacuum hose.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
07-31-2006 | 03:53 AM
#4
Guest
Posts: n/a
Re: How to test MAP Sensor on 1997 Honda Civic LX
"Don" <dsuwanna@yahoo.com> wrote in
news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
> I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> need to do a smog check. The error code is 5, MAP Sensor (Manifold
> Absolute Pressure) mechanical problem. How do I test the sensor (or any
> web-link)? I want to make sure it is the problem on the MAP sensor
> before I replace it with a new one.
First of all, don't rely on the MIL-flash for your code. It will show
Code 5 for FIVE different OBD-II errors:
P0106 - MAP Sensor range/performance problem
P0107 - MAP Sensor low-voltage (high vacuum) problem
P0108 - MAP Sensor high-voltage (low vacuum) problem
P1128 - MAP lower than expected
P1129 - MAP higher than expected
You need to have the code read properly using an OBD-II tester. Testing of
this component is beyond the average home mechanic, besides replacment of
the vacuum hose.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
> I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> need to do a smog check. The error code is 5, MAP Sensor (Manifold
> Absolute Pressure) mechanical problem. How do I test the sensor (or any
> web-link)? I want to make sure it is the problem on the MAP sensor
> before I replace it with a new one.
First of all, don't rely on the MIL-flash for your code. It will show
Code 5 for FIVE different OBD-II errors:
P0106 - MAP Sensor range/performance problem
P0107 - MAP Sensor low-voltage (high vacuum) problem
P0108 - MAP Sensor high-voltage (low vacuum) problem
P1128 - MAP lower than expected
P1129 - MAP higher than expected
You need to have the code read properly using an OBD-II tester. Testing of
this component is beyond the average home mechanic, besides replacment of
the vacuum hose.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
07-31-2006 | 03:53 AM
#5
Guest
Posts: n/a
Re: How to test MAP Sensor on 1997 Honda Civic LX
"Don" <dsuwanna@yahoo.com> wrote in
news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
> I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> need to do a smog check. The error code is 5, MAP Sensor (Manifold
> Absolute Pressure) mechanical problem. How do I test the sensor (or any
> web-link)? I want to make sure it is the problem on the MAP sensor
> before I replace it with a new one.
First of all, don't rely on the MIL-flash for your code. It will show
Code 5 for FIVE different OBD-II errors:
P0106 - MAP Sensor range/performance problem
P0107 - MAP Sensor low-voltage (high vacuum) problem
P0108 - MAP Sensor high-voltage (low vacuum) problem
P1128 - MAP lower than expected
P1129 - MAP higher than expected
You need to have the code read properly using an OBD-II tester. Testing of
this component is beyond the average home mechanic, besides replacment of
the vacuum hose.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
> I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> need to do a smog check. The error code is 5, MAP Sensor (Manifold
> Absolute Pressure) mechanical problem. How do I test the sensor (or any
> web-link)? I want to make sure it is the problem on the MAP sensor
> before I replace it with a new one.
First of all, don't rely on the MIL-flash for your code. It will show
Code 5 for FIVE different OBD-II errors:
P0106 - MAP Sensor range/performance problem
P0107 - MAP Sensor low-voltage (high vacuum) problem
P0108 - MAP Sensor high-voltage (low vacuum) problem
P1128 - MAP lower than expected
P1129 - MAP higher than expected
You need to have the code read properly using an OBD-II tester. Testing of
this component is beyond the average home mechanic, besides replacment of
the vacuum hose.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
08-01-2006 | 05:15 AM
#6
Guest
Posts: n/a
Re: How to test MAP Sensor on 1997 Honda Civic LX
Honda H Emblem Badge Shop and Store Civic Accord Integra Acura Jazz
Type-R S2000
Where can I buy Honda H Emblem Badge Red, Blue, Black, White, Yellow ?
Who buy these badge in www.autoxpat.com ?
http://www.autoxpat.com/shop/
Please comment and address about this shop of price and services ..
Regards,
RC Man
TeGGeR® wrote:
> "Don" <dsuwanna@yahoo.com> wrote in
> news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
>
> > I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> > need to do a smog check. The error code is 5, MAP Sensor (Manifold
> > Absolute Pressure) mechanical problem. How do I test the sensor (or any
> > web-link)? I want to make sure it is the problem on the MAP sensor
> > before I replace it with a new one.
>
>
> First of all, don't rely on the MIL-flash for your code. It will show
> Code 5 for FIVE different OBD-II errors:
> P0106 - MAP Sensor range/performance problem
> P0107 - MAP Sensor low-voltage (high vacuum) problem
> P0108 - MAP Sensor high-voltage (low vacuum) problem
> P1128 - MAP lower than expected
> P1129 - MAP higher than expected
>
> You need to have the code read properly using an OBD-II tester. Testing of
> this component is beyond the average home mechanic, besides replacment of
> the vacuum hose.
>
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
Type-R S2000
Where can I buy Honda H Emblem Badge Red, Blue, Black, White, Yellow ?
Who buy these badge in www.autoxpat.com ?
http://www.autoxpat.com/shop/
Please comment and address about this shop of price and services ..
Regards,
RC Man
TeGGeR® wrote:
> "Don" <dsuwanna@yahoo.com> wrote in
> news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
>
> > I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> > need to do a smog check. The error code is 5, MAP Sensor (Manifold
> > Absolute Pressure) mechanical problem. How do I test the sensor (or any
> > web-link)? I want to make sure it is the problem on the MAP sensor
> > before I replace it with a new one.
>
>
> First of all, don't rely on the MIL-flash for your code. It will show
> Code 5 for FIVE different OBD-II errors:
> P0106 - MAP Sensor range/performance problem
> P0107 - MAP Sensor low-voltage (high vacuum) problem
> P0108 - MAP Sensor high-voltage (low vacuum) problem
> P1128 - MAP lower than expected
> P1129 - MAP higher than expected
>
> You need to have the code read properly using an OBD-II tester. Testing of
> this component is beyond the average home mechanic, besides replacment of
> the vacuum hose.
>
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
08-01-2006 | 05:15 AM
#7
Guest
Posts: n/a
Re: How to test MAP Sensor on 1997 Honda Civic LX
Honda H Emblem Badge Shop and Store Civic Accord Integra Acura Jazz
Type-R S2000
Where can I buy Honda H Emblem Badge Red, Blue, Black, White, Yellow ?
Who buy these badge in www.autoxpat.com ?
http://www.autoxpat.com/shop/
Please comment and address about this shop of price and services ..
Regards,
RC Man
TeGGeR® wrote:
> "Don" <dsuwanna@yahoo.com> wrote in
> news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
>
> > I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> > need to do a smog check. The error code is 5, MAP Sensor (Manifold
> > Absolute Pressure) mechanical problem. How do I test the sensor (or any
> > web-link)? I want to make sure it is the problem on the MAP sensor
> > before I replace it with a new one.
>
>
> First of all, don't rely on the MIL-flash for your code. It will show
> Code 5 for FIVE different OBD-II errors:
> P0106 - MAP Sensor range/performance problem
> P0107 - MAP Sensor low-voltage (high vacuum) problem
> P0108 - MAP Sensor high-voltage (low vacuum) problem
> P1128 - MAP lower than expected
> P1129 - MAP higher than expected
>
> You need to have the code read properly using an OBD-II tester. Testing of
> this component is beyond the average home mechanic, besides replacment of
> the vacuum hose.
>
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
Type-R S2000
Where can I buy Honda H Emblem Badge Red, Blue, Black, White, Yellow ?
Who buy these badge in www.autoxpat.com ?
http://www.autoxpat.com/shop/
Please comment and address about this shop of price and services ..
Regards,
RC Man
TeGGeR® wrote:
> "Don" <dsuwanna@yahoo.com> wrote in
> news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
>
> > I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> > need to do a smog check. The error code is 5, MAP Sensor (Manifold
> > Absolute Pressure) mechanical problem. How do I test the sensor (or any
> > web-link)? I want to make sure it is the problem on the MAP sensor
> > before I replace it with a new one.
>
>
> First of all, don't rely on the MIL-flash for your code. It will show
> Code 5 for FIVE different OBD-II errors:
> P0106 - MAP Sensor range/performance problem
> P0107 - MAP Sensor low-voltage (high vacuum) problem
> P0108 - MAP Sensor high-voltage (low vacuum) problem
> P1128 - MAP lower than expected
> P1129 - MAP higher than expected
>
> You need to have the code read properly using an OBD-II tester. Testing of
> this component is beyond the average home mechanic, besides replacment of
> the vacuum hose.
>
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
08-01-2006 | 05:15 AM
#8
Guest
Posts: n/a
Re: How to test MAP Sensor on 1997 Honda Civic LX
Honda H Emblem Badge Shop and Store Civic Accord Integra Acura Jazz
Type-R S2000
Where can I buy Honda H Emblem Badge Red, Blue, Black, White, Yellow ?
Who buy these badge in www.autoxpat.com ?
http://www.autoxpat.com/shop/
Please comment and address about this shop of price and services ..
Regards,
RC Man
TeGGeR® wrote:
> "Don" <dsuwanna@yahoo.com> wrote in
> news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
>
> > I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> > need to do a smog check. The error code is 5, MAP Sensor (Manifold
> > Absolute Pressure) mechanical problem. How do I test the sensor (or any
> > web-link)? I want to make sure it is the problem on the MAP sensor
> > before I replace it with a new one.
>
>
> First of all, don't rely on the MIL-flash for your code. It will show
> Code 5 for FIVE different OBD-II errors:
> P0106 - MAP Sensor range/performance problem
> P0107 - MAP Sensor low-voltage (high vacuum) problem
> P0108 - MAP Sensor high-voltage (low vacuum) problem
> P1128 - MAP lower than expected
> P1129 - MAP higher than expected
>
> You need to have the code read properly using an OBD-II tester. Testing of
> this component is beyond the average home mechanic, besides replacment of
> the vacuum hose.
>
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
Type-R S2000
Where can I buy Honda H Emblem Badge Red, Blue, Black, White, Yellow ?
Who buy these badge in www.autoxpat.com ?
http://www.autoxpat.com/shop/
Please comment and address about this shop of price and services ..
Regards,
RC Man
TeGGeR® wrote:
> "Don" <dsuwanna@yahoo.com> wrote in
> news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
>
> > I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> > need to do a smog check. The error code is 5, MAP Sensor (Manifold
> > Absolute Pressure) mechanical problem. How do I test the sensor (or any
> > web-link)? I want to make sure it is the problem on the MAP sensor
> > before I replace it with a new one.
>
>
> First of all, don't rely on the MIL-flash for your code. It will show
> Code 5 for FIVE different OBD-II errors:
> P0106 - MAP Sensor range/performance problem
> P0107 - MAP Sensor low-voltage (high vacuum) problem
> P0108 - MAP Sensor high-voltage (low vacuum) problem
> P1128 - MAP lower than expected
> P1129 - MAP higher than expected
>
> You need to have the code read properly using an OBD-II tester. Testing of
> this component is beyond the average home mechanic, besides replacment of
> the vacuum hose.
>
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
08-01-2006 | 05:15 AM
#9
Guest
Posts: n/a
Re: How to test MAP Sensor on 1997 Honda Civic LX
Honda H Emblem Badge Shop and Store Civic Accord Integra Acura Jazz
Type-R S2000
Where can I buy Honda H Emblem Badge Red, Blue, Black, White, Yellow ?
Who buy these badge in www.autoxpat.com ?
http://www.autoxpat.com/shop/
Please comment and address about this shop of price and services ..
Regards,
RC Man
TeGGeR® wrote:
> "Don" <dsuwanna@yahoo.com> wrote in
> news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
>
> > I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> > need to do a smog check. The error code is 5, MAP Sensor (Manifold
> > Absolute Pressure) mechanical problem. How do I test the sensor (or any
> > web-link)? I want to make sure it is the problem on the MAP sensor
> > before I replace it with a new one.
>
>
> First of all, don't rely on the MIL-flash for your code. It will show
> Code 5 for FIVE different OBD-II errors:
> P0106 - MAP Sensor range/performance problem
> P0107 - MAP Sensor low-voltage (high vacuum) problem
> P0108 - MAP Sensor high-voltage (low vacuum) problem
> P1128 - MAP lower than expected
> P1129 - MAP higher than expected
>
> You need to have the code read properly using an OBD-II tester. Testing of
> this component is beyond the average home mechanic, besides replacment of
> the vacuum hose.
>
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
Type-R S2000
Where can I buy Honda H Emblem Badge Red, Blue, Black, White, Yellow ?
Who buy these badge in www.autoxpat.com ?
http://www.autoxpat.com/shop/
Please comment and address about this shop of price and services ..
Regards,
RC Man
TeGGeR® wrote:
> "Don" <dsuwanna@yahoo.com> wrote in
> news:1154299791.397448.300830@s13g2000cwa.googlegr oups.com:
>
> > I've Honda Civic LX 1997, 120,000 Mi. My CEL came on right before I
> > need to do a smog check. The error code is 5, MAP Sensor (Manifold
> > Absolute Pressure) mechanical problem. How do I test the sensor (or any
> > web-link)? I want to make sure it is the problem on the MAP sensor
> > before I replace it with a new one.
>
>
> First of all, don't rely on the MIL-flash for your code. It will show
> Code 5 for FIVE different OBD-II errors:
> P0106 - MAP Sensor range/performance problem
> P0107 - MAP Sensor low-voltage (high vacuum) problem
> P0108 - MAP Sensor high-voltage (low vacuum) problem
> P1128 - MAP lower than expected
> P1129 - MAP higher than expected
>
> You need to have the code read properly using an OBD-II tester. Testing of
> this component is beyond the average home mechanic, besides replacment of
> the vacuum hose.
>
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
Thread
Thread Starter
Forum
Replies
Last Post
honda video
Honda Videos
0
08-12-2008 05:19 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)