How do I remove front broken wheel lugnut studs?
08-20-2007 | 05:28 PM
#2
Guest
Posts: n/a
Re: How do I remove front broken wheel lugnut studs?
porshapower@webtv.net (:\) :\)) wrote in news:24273-46C9B949-982@storefull-
3333.bay.webtv.net:
> I have the caliper and rotor off and cant bang the broken stud through
> because it hits the wheel hub. Do I have to remove the hub. If so is
> it just the large nut in the middle? Thanks
>
What kinda car? What year?
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
3333.bay.webtv.net:
> I have the caliper and rotor off and cant bang the broken stud through
> because it hits the wheel hub. Do I have to remove the hub. If so is
> it just the large nut in the middle? Thanks
>
What kinda car? What year?
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
08-20-2007 | 05:28 PM
#3
Guest
Posts: n/a
Re: How do I remove front broken wheel lugnut studs?
porshapower@webtv.net (:\) :\)) wrote in news:24273-46C9B949-982@storefull-
3333.bay.webtv.net:
> I have the caliper and rotor off and cant bang the broken stud through
> because it hits the wheel hub. Do I have to remove the hub. If so is
> it just the large nut in the middle? Thanks
>
What kinda car? What year?
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
3333.bay.webtv.net:
> I have the caliper and rotor off and cant bang the broken stud through
> because it hits the wheel hub. Do I have to remove the hub. If so is
> it just the large nut in the middle? Thanks
>
What kinda car? What year?
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
08-20-2007 | 05:28 PM
#4
Guest
Posts: n/a
Re: How do I remove front broken wheel lugnut studs?
porshapower@webtv.net (:\) :\)) wrote in news:24273-46C9B949-982@storefull-
3333.bay.webtv.net:
> I have the caliper and rotor off and cant bang the broken stud through
> because it hits the wheel hub. Do I have to remove the hub. If so is
> it just the large nut in the middle? Thanks
>
What kinda car? What year?
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
3333.bay.webtv.net:
> I have the caliper and rotor off and cant bang the broken stud through
> because it hits the wheel hub. Do I have to remove the hub. If so is
> it just the large nut in the middle? Thanks
>
What kinda car? What year?
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
08-20-2007 | 07:56 PM
#5
Guest
Posts: n/a
Re: How do I remove front broken wheel lugnut studs?
" " <porshapower@webtv.net> wrote in message
news:24273-46C9B949-982@storefull-3333.bay.webtv.net...
>I have the caliper and rotor off and cant bang the broken stud through
> because it hits the wheel hub. Do I have to remove the hub. If so is
> it just the large nut in the middle? Thanks
>
>
Depends entirely on model and year. May help to know if you have ABS also.
Mike
" <porshapower@webtv.net> wrote in messagenews:24273-46C9B949-982@storefull-3333.bay.webtv.net...
>I have the caliper and rotor off and cant bang the broken stud through
> because it hits the wheel hub. Do I have to remove the hub. If so is
> it just the large nut in the middle? Thanks
>
>
Depends entirely on model and year. May help to know if you have ABS also.
Mike
08-20-2007 | 07:56 PM
#6
Guest
Posts: n/a
Re: How do I remove front broken wheel lugnut studs?
" " <porshapower@webtv.net> wrote in message
news:24273-46C9B949-982@storefull-3333.bay.webtv.net...
>I have the caliper and rotor off and cant bang the broken stud through
> because it hits the wheel hub. Do I have to remove the hub. If so is
> it just the large nut in the middle? Thanks
>
>
Depends entirely on model and year. May help to know if you have ABS also.
Mike
" <porshapower@webtv.net> wrote in messagenews:24273-46C9B949-982@storefull-3333.bay.webtv.net...
>I have the caliper and rotor off and cant bang the broken stud through
> because it hits the wheel hub. Do I have to remove the hub. If so is
> it just the large nut in the middle? Thanks
>
>
Depends entirely on model and year. May help to know if you have ABS also.
Mike
08-20-2007 | 07:56 PM
#7
Guest
Posts: n/a
Re: How do I remove front broken wheel lugnut studs?
" " <porshapower@webtv.net> wrote in message
news:24273-46C9B949-982@storefull-3333.bay.webtv.net...
>I have the caliper and rotor off and cant bang the broken stud through
> because it hits the wheel hub. Do I have to remove the hub. If so is
> it just the large nut in the middle? Thanks
>
>
Depends entirely on model and year. May help to know if you have ABS also.
Mike
" <porshapower@webtv.net> wrote in messagenews:24273-46C9B949-982@storefull-3333.bay.webtv.net...
>I have the caliper and rotor off and cant bang the broken stud through
> because it hits the wheel hub. Do I have to remove the hub. If so is
> it just the large nut in the middle? Thanks
>
>
Depends entirely on model and year. May help to know if you have ABS also.
Mike
08-21-2007 | 12:47 AM
#8
Guest
Posts: n/a
Re: How do I remove front broken wheel lugnut studs?
Geez...dont know what I was thinking It is a 1998 honda civic 2 door.
I got as far as taking caliper and rotor off. I then removed the large
axle nut but nothing happened. I know somehow I have to remove the hub
assembly?(part the holds the lug studs) because I cant bang them through
as I have done in the past with other cars. With this car the rear of
the studs will not clear the back piece in order to remove them...
Thanks!!Nate
It is a 1998 honda civic 2 door.I got as far as taking caliper and rotor off. I then removed the large
axle nut but nothing happened. I know somehow I have to remove the hub
assembly?(part the holds the lug studs) because I cant bang them through
as I have done in the past with other cars. With this car the rear of
the studs will not clear the back piece in order to remove them...
Thanks!!
Nate
08-21-2007 | 12:47 AM
#9
Guest
Posts: n/a
Re: How do I remove front broken wheel lugnut studs?
Geez...dont know what I was thinking It is a 1998 honda civic 2 door.
I got as far as taking caliper and rotor off. I then removed the large
axle nut but nothing happened. I know somehow I have to remove the hub
assembly?(part the holds the lug studs) because I cant bang them through
as I have done in the past with other cars. With this car the rear of
the studs will not clear the back piece in order to remove them...
Thanks!!Nate
It is a 1998 honda civic 2 door.I got as far as taking caliper and rotor off. I then removed the large
axle nut but nothing happened. I know somehow I have to remove the hub
assembly?(part the holds the lug studs) because I cant bang them through
as I have done in the past with other cars. With this car the rear of
the studs will not clear the back piece in order to remove them...
Thanks!!
Nate
08-21-2007 | 12:47 AM
#10
Guest
Posts: n/a
Re: How do I remove front broken wheel lugnut studs?
Geez...dont know what I was thinking It is a 1998 honda civic 2 door.
I got as far as taking caliper and rotor off. I then removed the large
axle nut but nothing happened. I know somehow I have to remove the hub
assembly?(part the holds the lug studs) because I cant bang them through
as I have done in the past with other cars. With this car the rear of
the studs will not clear the back piece in order to remove them...
Thanks!!Nate
It is a 1998 honda civic 2 door.I got as far as taking caliper and rotor off. I then removed the large
axle nut but nothing happened. I know somehow I have to remove the hub
assembly?(part the holds the lug studs) because I cant bang them through
as I have done in the past with other cars. With this car the rear of
the studs will not clear the back piece in order to remove them...
Thanks!!
Nate
08-22-2007 | 04:03 AM
#11
Guest
Posts: n/a
Re: How do I remove front broken wheel lugnut studs?
"" wrote:
>
> Geez...dont know what I was thinking It is a 1998 honda civic 2 door.
> I got as far as taking caliper and rotor off. I then removed the large
> axle nut but nothing happened. I know somehow I have to remove the hub
> assembly?(part the holds the lug studs) because I cant bang them through
> as I have done in the past with other cars. With this car the rear of
> the studs will not clear the back piece in order to remove them...
> Thanks!!Nate
Here's a link to a factory service manual for a '98 Civic Aerodeck,
http://tinyurl.com/2n2gbw . The front hub assembly may be similar to
your '98 2 door.
Eric
" wrote:>
> Geez...dont know what I was thinking
It is a 1998 honda civic 2 door.> I got as far as taking caliper and rotor off. I then removed the large
> axle nut but nothing happened. I know somehow I have to remove the hub
> assembly?(part the holds the lug studs) because I cant bang them through
> as I have done in the past with other cars. With this car the rear of
> the studs will not clear the back piece in order to remove them...
> Thanks!!
NateHere's a link to a factory service manual for a '98 Civic Aerodeck,
http://tinyurl.com/2n2gbw . The front hub assembly may be similar to
your '98 2 door.
Eric
08-22-2007 | 04:03 AM
#12
Guest
Posts: n/a
Re: How do I remove front broken wheel lugnut studs?
"" wrote:
>
> Geez...dont know what I was thinking It is a 1998 honda civic 2 door.
> I got as far as taking caliper and rotor off. I then removed the large
> axle nut but nothing happened. I know somehow I have to remove the hub
> assembly?(part the holds the lug studs) because I cant bang them through
> as I have done in the past with other cars. With this car the rear of
> the studs will not clear the back piece in order to remove them...
> Thanks!!Nate
Here's a link to a factory service manual for a '98 Civic Aerodeck,
http://tinyurl.com/2n2gbw . The front hub assembly may be similar to
your '98 2 door.
Eric
" wrote:>
> Geez...dont know what I was thinking
It is a 1998 honda civic 2 door.> I got as far as taking caliper and rotor off. I then removed the large
> axle nut but nothing happened. I know somehow I have to remove the hub
> assembly?(part the holds the lug studs) because I cant bang them through
> as I have done in the past with other cars. With this car the rear of
> the studs will not clear the back piece in order to remove them...
> Thanks!!
NateHere's a link to a factory service manual for a '98 Civic Aerodeck,
http://tinyurl.com/2n2gbw . The front hub assembly may be similar to
your '98 2 door.
Eric
08-22-2007 | 04:03 AM
#13
Guest
Posts: n/a
Re: How do I remove front broken wheel lugnut studs?
"" wrote:
>
> Geez...dont know what I was thinking It is a 1998 honda civic 2 door.
> I got as far as taking caliper and rotor off. I then removed the large
> axle nut but nothing happened. I know somehow I have to remove the hub
> assembly?(part the holds the lug studs) because I cant bang them through
> as I have done in the past with other cars. With this car the rear of
> the studs will not clear the back piece in order to remove them...
> Thanks!!Nate
Here's a link to a factory service manual for a '98 Civic Aerodeck,
http://tinyurl.com/2n2gbw . The front hub assembly may be similar to
your '98 2 door.
Eric
" wrote:>
> Geez...dont know what I was thinking
It is a 1998 honda civic 2 door.> I got as far as taking caliper and rotor off. I then removed the large
> axle nut but nothing happened. I know somehow I have to remove the hub
> assembly?(part the holds the lug studs) because I cant bang them through
> as I have done in the past with other cars. With this car the rear of
> the studs will not clear the back piece in order to remove them...
> Thanks!!
NateHere's a link to a factory service manual for a '98 Civic Aerodeck,
http://tinyurl.com/2n2gbw . The front hub assembly may be similar to
your '98 2 door.
Eric