Honda CRV 2003
01-29-2007 | 06:25 PM
#1
Guest
Posts: n/a
Honda CRV 2003
I am thinking about relining the front brakes on my CRV..I havent done
brakes for about 7 years. Do I need any special tools for the Honda
CRV or is it straightforward.?
I’ve relined hundreds of brakes before . (discs and drums)
--
Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/2003-ftopict204858.html
brakes for about 7 years. Do I need any special tools for the Honda
CRV or is it straightforward.?
I’ve relined hundreds of brakes before . (discs and drums)
--
Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/2003-ftopict204858.html
01-29-2007 | 06:43 PM
#2
Guest
Posts: n/a
Re: Honda CRV 2003
sparkymcfc wrote:
> I am thinking about relining the front brakes on my CRV..I havent done
> brakes for about 7 years. Do I need any special tools for the Honda
> CRV or is it straightforward.?
>
> I’ve relined hundreds of brakes before . (discs and drums)
>
================================
You just need an impact driver to remove the two Phillips screws, and
suitable tools to clean the mating surfaces of the hub and rotor, as
well as lube for the sliders and anti-squeak grease.
There's even videos at www.hondasuv.com
'Curly'
> I am thinking about relining the front brakes on my CRV..I havent done
> brakes for about 7 years. Do I need any special tools for the Honda
> CRV or is it straightforward.?
>
> I’ve relined hundreds of brakes before . (discs and drums)
>
================================
You just need an impact driver to remove the two Phillips screws, and
suitable tools to clean the mating surfaces of the hub and rotor, as
well as lube for the sliders and anti-squeak grease.
There's even videos at www.hondasuv.com
'Curly'
01-29-2007 | 06:43 PM
#3
Guest
Posts: n/a
Re: Honda CRV 2003
sparkymcfc wrote:
> I am thinking about relining the front brakes on my CRV..I havent done
> brakes for about 7 years. Do I need any special tools for the Honda
> CRV or is it straightforward.?
>
> I’ve relined hundreds of brakes before . (discs and drums)
>
================================
You just need an impact driver to remove the two Phillips screws, and
suitable tools to clean the mating surfaces of the hub and rotor, as
well as lube for the sliders and anti-squeak grease.
There's even videos at www.hondasuv.com
'Curly'
> I am thinking about relining the front brakes on my CRV..I havent done
> brakes for about 7 years. Do I need any special tools for the Honda
> CRV or is it straightforward.?
>
> I’ve relined hundreds of brakes before . (discs and drums)
>
================================
You just need an impact driver to remove the two Phillips screws, and
suitable tools to clean the mating surfaces of the hub and rotor, as
well as lube for the sliders and anti-squeak grease.
There's even videos at www.hondasuv.com
'Curly'
01-29-2007 | 06:43 PM
#4
Guest
Posts: n/a
Re: Honda CRV 2003
sparkymcfc wrote:
> I am thinking about relining the front brakes on my CRV..I havent done
> brakes for about 7 years. Do I need any special tools for the Honda
> CRV or is it straightforward.?
>
> I’ve relined hundreds of brakes before . (discs and drums)
>
================================
You just need an impact driver to remove the two Phillips screws, and
suitable tools to clean the mating surfaces of the hub and rotor, as
well as lube for the sliders and anti-squeak grease.
There's even videos at www.hondasuv.com
'Curly'
> I am thinking about relining the front brakes on my CRV..I havent done
> brakes for about 7 years. Do I need any special tools for the Honda
> CRV or is it straightforward.?
>
> I’ve relined hundreds of brakes before . (discs and drums)
>
================================
You just need an impact driver to remove the two Phillips screws, and
suitable tools to clean the mating surfaces of the hub and rotor, as
well as lube for the sliders and anti-squeak grease.
There's even videos at www.hondasuv.com
'Curly'
01-29-2007 | 06:43 PM
#5
Guest
Posts: n/a
Re: Honda CRV 2003
sparkymcfc wrote:
> I am thinking about relining the front brakes on my CRV..I havent done
> brakes for about 7 years. Do I need any special tools for the Honda
> CRV or is it straightforward.?
>
> I’ve relined hundreds of brakes before . (discs and drums)
>
================================
You just need an impact driver to remove the two Phillips screws, and
suitable tools to clean the mating surfaces of the hub and rotor, as
well as lube for the sliders and anti-squeak grease.
There's even videos at www.hondasuv.com
'Curly'
> I am thinking about relining the front brakes on my CRV..I havent done
> brakes for about 7 years. Do I need any special tools for the Honda
> CRV or is it straightforward.?
>
> I’ve relined hundreds of brakes before . (discs and drums)
>
================================
You just need an impact driver to remove the two Phillips screws, and
suitable tools to clean the mating surfaces of the hub and rotor, as
well as lube for the sliders and anti-squeak grease.
There's even videos at www.hondasuv.com
'Curly'
01-30-2007 | 06:26 PM
#6
Guest
Posts: n/a
Re: Re: Honda CRV 2003
thanks for that......couldnt find a video about CRV brakes....whats
the link do you know?
Mar
"motsco_" wrote
> sparkymcfc wrote:
> > I am thinking about relining the front brakes on my CRV..I
> havent done
> > brakes for about 7 years. Do I need any special tools for
> the Honda
> > CRV or is it straightforward.?
> >
> > I’ve relined hundreds of brakes before . (discs and drums)
> >
> ================================
>
> You just need an impact driver to remove the two Phillips
> screws, and
> suitable tools to clean the mating surfaces of the hub and
> rotor, as
> well as lube for the sliders and anti-squeak grease.
> There's even videos at www.hondasuv.com
>
> 'Curly'
--
Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/2003-front...ict204858.html
the link do you know?
Mar
"motsco_" wrote
> sparkymcfc wrote:
> > I am thinking about relining the front brakes on my CRV..I
> havent done
> > brakes for about 7 years. Do I need any special tools for
> the Honda
> > CRV or is it straightforward.?
> >
> > I’ve relined hundreds of brakes before . (discs and drums)
> >
> ================================
>
> You just need an impact driver to remove the two Phillips
> screws, and
> suitable tools to clean the mating surfaces of the hub and
> rotor, as
> well as lube for the sliders and anti-squeak grease.
> There's even videos at www.hondasuv.com
>
> 'Curly'
--
Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/2003-front...ict204858.html
01-30-2007 | 06:26 PM
#7
Guest
Posts: n/a
Re: Re: Honda CRV 2003
thanks for that......couldnt find a video about CRV brakes....whats
the link do you know?
Mar
"motsco_" wrote
> sparkymcfc wrote:
> > I am thinking about relining the front brakes on my CRV..I
> havent done
> > brakes for about 7 years. Do I need any special tools for
> the Honda
> > CRV or is it straightforward.?
> >
> > I’ve relined hundreds of brakes before . (discs and drums)
> >
> ================================
>
> You just need an impact driver to remove the two Phillips
> screws, and
> suitable tools to clean the mating surfaces of the hub and
> rotor, as
> well as lube for the sliders and anti-squeak grease.
> There's even videos at www.hondasuv.com
>
> 'Curly'
--
Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/2003-front...ict204858.html
the link do you know?
Mar
"motsco_" wrote
> sparkymcfc wrote:
> > I am thinking about relining the front brakes on my CRV..I
> havent done
> > brakes for about 7 years. Do I need any special tools for
> the Honda
> > CRV or is it straightforward.?
> >
> > I’ve relined hundreds of brakes before . (discs and drums)
> >
> ================================
>
> You just need an impact driver to remove the two Phillips
> screws, and
> suitable tools to clean the mating surfaces of the hub and
> rotor, as
> well as lube for the sliders and anti-squeak grease.
> There's even videos at www.hondasuv.com
>
> 'Curly'
--
Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/2003-front...ict204858.html
01-30-2007 | 06:26 PM
#8
Guest
Posts: n/a
Re: Re: Honda CRV 2003
thanks for that......couldnt find a video about CRV brakes....whats
the link do you know?
Mar
"motsco_" wrote
> sparkymcfc wrote:
> > I am thinking about relining the front brakes on my CRV..I
> havent done
> > brakes for about 7 years. Do I need any special tools for
> the Honda
> > CRV or is it straightforward.?
> >
> > I’ve relined hundreds of brakes before . (discs and drums)
> >
> ================================
>
> You just need an impact driver to remove the two Phillips
> screws, and
> suitable tools to clean the mating surfaces of the hub and
> rotor, as
> well as lube for the sliders and anti-squeak grease.
> There's even videos at www.hondasuv.com
>
> 'Curly'
--
Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/2003-front...ict204858.html
the link do you know?
Mar
"motsco_" wrote
> sparkymcfc wrote:
> > I am thinking about relining the front brakes on my CRV..I
> havent done
> > brakes for about 7 years. Do I need any special tools for
> the Honda
> > CRV or is it straightforward.?
> >
> > I’ve relined hundreds of brakes before . (discs and drums)
> >
> ================================
>
> You just need an impact driver to remove the two Phillips
> screws, and
> suitable tools to clean the mating surfaces of the hub and
> rotor, as
> well as lube for the sliders and anti-squeak grease.
> There's even videos at www.hondasuv.com
>
> 'Curly'
--
Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/2003-front...ict204858.html
01-30-2007 | 06:26 PM
#9
Guest
Posts: n/a
Re: Re: Honda CRV 2003
thanks for that......couldnt find a video about CRV brakes....whats
the link do you know?
Mar
"motsco_" wrote
> sparkymcfc wrote:
> > I am thinking about relining the front brakes on my CRV..I
> havent done
> > brakes for about 7 years. Do I need any special tools for
> the Honda
> > CRV or is it straightforward.?
> >
> > I’ve relined hundreds of brakes before . (discs and drums)
> >
> ================================
>
> You just need an impact driver to remove the two Phillips
> screws, and
> suitable tools to clean the mating surfaces of the hub and
> rotor, as
> well as lube for the sliders and anti-squeak grease.
> There's even videos at www.hondasuv.com
>
> 'Curly'
--
Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/2003-front...ict204858.html
the link do you know?
Mar
"motsco_" wrote
> sparkymcfc wrote:
> > I am thinking about relining the front brakes on my CRV..I
> havent done
> > brakes for about 7 years. Do I need any special tools for
> the Honda
> > CRV or is it straightforward.?
> >
> > I’ve relined hundreds of brakes before . (discs and drums)
> >
> ================================
>
> You just need an impact driver to remove the two Phillips
> screws, and
> suitable tools to clean the mating surfaces of the hub and
> rotor, as
> well as lube for the sliders and anti-squeak grease.
> There's even videos at www.hondasuv.com
>
> 'Curly'
--
Posted at author's request, using http://www.AutoBoardz.com interface
Articles individually verified to usenet standards. Visit URL to contact author/report abuse
Thread archive: http://www.AutoBoardz.com/2003-front...ict204858.html
01-31-2007 | 12:06 PM
#10
Guest
Posts: n/a
Re: Honda CRV 2003 ( front brakes )
sparkymcfc wrote:
> thanks for that......couldnt find a video about CRV brakes....whats
> the link do you know?
>
> Mark
>
=================================
Start here. If you can't find them, sign in and search.
http://www.hondasuv.com/members/forumdisplay.php?f=20
'Curly'
> thanks for that......couldnt find a video about CRV brakes....whats
> the link do you know?
>
> Mark
>
=================================
Start here. If you can't find them, sign in and search.
http://www.hondasuv.com/members/forumdisplay.php?f=20
'Curly'
01-31-2007 | 12:06 PM
#11
Guest
Posts: n/a
Re: Honda CRV 2003 ( front brakes )
sparkymcfc wrote:
> thanks for that......couldnt find a video about CRV brakes....whats
> the link do you know?
>
> Mark
>
=================================
Start here. If you can't find them, sign in and search.
http://www.hondasuv.com/members/forumdisplay.php?f=20
'Curly'
> thanks for that......couldnt find a video about CRV brakes....whats
> the link do you know?
>
> Mark
>
=================================
Start here. If you can't find them, sign in and search.
http://www.hondasuv.com/members/forumdisplay.php?f=20
'Curly'
01-31-2007 | 12:06 PM
#12
Guest
Posts: n/a
Re: Honda CRV 2003 ( front brakes )
sparkymcfc wrote:
> thanks for that......couldnt find a video about CRV brakes....whats
> the link do you know?
>
> Mark
>
=================================
Start here. If you can't find them, sign in and search.
http://www.hondasuv.com/members/forumdisplay.php?f=20
'Curly'
> thanks for that......couldnt find a video about CRV brakes....whats
> the link do you know?
>
> Mark
>
=================================
Start here. If you can't find them, sign in and search.
http://www.hondasuv.com/members/forumdisplay.php?f=20
'Curly'
01-31-2007 | 12:06 PM
#13
Guest
Posts: n/a
Re: Honda CRV 2003 ( front brakes )
sparkymcfc wrote:
> thanks for that......couldnt find a video about CRV brakes....whats
> the link do you know?
>
> Mark
>
=================================
Start here. If you can't find them, sign in and search.
http://www.hondasuv.com/members/forumdisplay.php?f=20
'Curly'
> thanks for that......couldnt find a video about CRV brakes....whats
> the link do you know?
>
> Mark
>
=================================
Start here. If you can't find them, sign in and search.
http://www.hondasuv.com/members/forumdisplay.php?f=20
'Curly'
Thread
Thread Starter
Forum
Replies
Last Post
alic02alic
Other Honda Models
0
11-15-2007 01:36 PM
arthur b
Other Honda Models
0
11-03-2007 06:15 AM
milesandmiles
Other Honda Models
1
07-20-2007 01:55 AM
rajiv p
Other Honda Models
2
06-05-2007 06:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)