Hi, I have a Honda Civic 1989 Dual Carb that is leaking terribly around
the Join between the black head cover and the engine so I am assuming I
need a new head gasket (correct me please if I am wrong). This leaking
oil is then burning up on the hot engine and manifold and smoking and
causing bad smells. How easy is it for a newbie such as myself to
replace the head gasket? Also, the grey plastic cover on the right of
the engine would be the cover for the cambelt? If so, why do I get a
sort of hissing sound from that side of the engine especially when
idling? I probably need to get the cambelt changed also soon as my car
has done 189,000kms.

Any help would be appreciated on this subject

Thanks

Matt

 

Matt Mills wrote:
> Hi, I have a Honda Civic 1989 Dual Carb that is leaking terribly around
> the Join between the black head cover and the engine so I am assuming I
> need a new head gasket (correct me please if I am wrong). This leaking
> oil is then burning up on the hot engine and manifold and smoking and
> causing bad smells. How easy is it for a newbie such as myself to
> replace the head gasket? Also, the grey plastic cover on the right of
> the engine would be the cover for the cambelt? If so, why do I get a
> sort of hissing sound from that side of the engine especially when
> idling? I probably need to get the cambelt changed also soon as my car
> has done 189,000kms.
>
> Any help would be appreciated on this subject
>
> Thanks
>
> Matt


Just wondering, maybe this isnt a head gasket but maybe a rocker cover
gasket?

 

Matt Mills wrote:
> Hi, I have a Honda Civic 1989 Dual Carb that is leaking terribly around
> the Join between the black head cover and the engine so I am assuming I
> need a new head gasket (correct me please if I am wrong). This leaking
> oil is then burning up on the hot engine and manifold and smoking and
> causing bad smells. How easy is it for a newbie such as myself to
> replace the head gasket? Also, the grey plastic cover on the right of
> the engine would be the cover for the cambelt? If so, why do I get a
> sort of hissing sound from that side of the engine especially when
> idling? I probably need to get the cambelt changed also soon as my car
> has done 189,000kms.
>
> Any help would be appreciated on this subject
>
> Thanks
>
> Matt


Just wondering, maybe this isnt a head gasket but maybe a rocker cover
gasket?

 

Matt Mills wrote:
> Hi, I have a Honda Civic 1989 Dual Carb that is leaking terribly around
> the Join between the black head cover and the engine so I am assuming I
> need a new head gasket (correct me please if I am wrong). This leaking
> oil is then burning up on the hot engine and manifold and smoking and
> causing bad smells. How easy is it for a newbie such as myself to
> replace the head gasket? Also, the grey plastic cover on the right of
> the engine would be the cover for the cambelt? If so, why do I get a
> sort of hissing sound from that side of the engine especially when
> idling? I probably need to get the cambelt changed also soon as my car
> has done 189,000kms.
>
> Any help would be appreciated on this subject
>
> Thanks
>
> Matt


Just wondering, maybe this isnt a head gasket but maybe a rocker cover
gasket?

 

"Matt Mills" <mattjmills@gmail.com> wrote in message
news:e3c3pe$f0c$1@lust.ihug.co.nz...
> Hi, I have a Honda Civic 1989 Dual Carb that is leaking terribly around
> the Join between the black head cover and the engine so I am assuming I
> need a new head gasket (correct me please if I am wrong). This leaking
> oil is then burning up on the hot engine and manifold and smoking and
> causing bad smells. How easy is it for a newbie such as myself to replace
> the head gasket? Also, the grey plastic cover on the right of the engine
> would be the cover for the cambelt? If so, why do I get a sort of hissing
> sound from that side of the engine especially when idling? I probably
> need to get the cambelt changed also soon as my car has done 189,000kms.
>
> Any help would be appreciated on this subject
>
> Thanks
>
> Matt

If I understand your description correctly, what you are describing is a
leak around your valve cover, which is not unusual. That's a whole lot
easier to change than a head gasket, which is not a job for a beginner!

OTOH, you mention the cambelt (timing belt) has 189K km. It may also be 17
years old. It is definitely time to change that belt and if the belt is
truly the original it is way overdue. DON'T PUT THAT OFF! If the timing belt
fails there is a serious risk of catastrophic damage to the engine. This is
not a newbie job, either, although not as expensive as a head gasket to have
done. It is very advisable to have the water pump replaced at the same time,
as the belt replacement includes 90% of the water pump labor and a failed
pump can destroy the belt... and quite possibly your engine.

When you have the timing belt replaced, point out the leakage. Replacing
that gasket is a part of the timing belt change.

Mike

 

"Matt Mills" <mattjmills@gmail.com> wrote in message
news:e3c3pe$f0c$1@lust.ihug.co.nz...
> Hi, I have a Honda Civic 1989 Dual Carb that is leaking terribly around
> the Join between the black head cover and the engine so I am assuming I
> need a new head gasket (correct me please if I am wrong). This leaking
> oil is then burning up on the hot engine and manifold and smoking and
> causing bad smells. How easy is it for a newbie such as myself to replace
> the head gasket? Also, the grey plastic cover on the right of the engine
> would be the cover for the cambelt? If so, why do I get a sort of hissing
> sound from that side of the engine especially when idling? I probably
> need to get the cambelt changed also soon as my car has done 189,000kms.
>
> Any help would be appreciated on this subject
>
> Thanks
>
> Matt

If I understand your description correctly, what you are describing is a
leak around your valve cover, which is not unusual. That's a whole lot
easier to change than a head gasket, which is not a job for a beginner!

OTOH, you mention the cambelt (timing belt) has 189K km. It may also be 17
years old. It is definitely time to change that belt and if the belt is
truly the original it is way overdue. DON'T PUT THAT OFF! If the timing belt
fails there is a serious risk of catastrophic damage to the engine. This is
not a newbie job, either, although not as expensive as a head gasket to have
done. It is very advisable to have the water pump replaced at the same time,
as the belt replacement includes 90% of the water pump labor and a failed
pump can destroy the belt... and quite possibly your engine.

When you have the timing belt replaced, point out the leakage. Replacing
that gasket is a part of the timing belt change.

Mike

 

"Matt Mills" <mattjmills@gmail.com> wrote in message
news:e3c3pe$f0c$1@lust.ihug.co.nz...
> Hi, I have a Honda Civic 1989 Dual Carb that is leaking terribly around
> the Join between the black head cover and the engine so I am assuming I
> need a new head gasket (correct me please if I am wrong). This leaking
> oil is then burning up on the hot engine and manifold and smoking and
> causing bad smells. How easy is it for a newbie such as myself to replace
> the head gasket? Also, the grey plastic cover on the right of the engine
> would be the cover for the cambelt? If so, why do I get a sort of hissing
> sound from that side of the engine especially when idling? I probably
> need to get the cambelt changed also soon as my car has done 189,000kms.
>
> Any help would be appreciated on this subject
>
> Thanks
>
> Matt

If I understand your description correctly, what you are describing is a
leak around your valve cover, which is not unusual. That's a whole lot
easier to change than a head gasket, which is not a job for a beginner!

OTOH, you mention the cambelt (timing belt) has 189K km. It may also be 17
years old. It is definitely time to change that belt and if the belt is
truly the original it is way overdue. DON'T PUT THAT OFF! If the timing belt
fails there is a serious risk of catastrophic damage to the engine. This is
not a newbie job, either, although not as expensive as a head gasket to have
done. It is very advisable to have the water pump replaced at the same time,
as the belt replacement includes 90% of the water pump labor and a failed
pump can destroy the belt... and quite possibly your engine.

When you have the timing belt replaced, point out the leakage. Replacing
that gasket is a part of the timing belt change.

Mike

 

"Matt Mills" <mattjmills@gmail.com> wrote
> Matt Mills wrote:
>> Hi, I have a Honda Civic 1989 Dual Carb that is leaking
>> terribly around the Join between the black head cover and
>> the engine so I am assuming I need a new head gasket
>> (correct me please if I am wrong). This leaking oil is
>> then burning up on the hot engine and manifold and
>> smoking and causing bad smells. How easy is it for a
>> newbie such as myself to replace the head gasket? Also,
>> the grey plastic cover on the right of the engine would
>> be the cover for the cambelt? If so, why do I get a sort
>> of hissing sound from that side of the engine especially
>> when idling? I probably need to get the cambelt changed
>> also soon as my car has done 189,000kms.

The "cam belt" is more frequently called the "timing belt"
these days. If it's never been replaced before on your
Civic, it's way overdue. The replacement frequency is 90k
miles ( = 97k km) or 6 years, whichever comes first, for
your Civic, for non-severe, U.S. driving conditions. You
should have it replaced immediately by a good independent
import shop or a dealer. If it breaks, and at this age, it
could break at any moment, serious damage may result to your
Civic's engine.

A timing belt replacement is not a beginner's job.

While the timing belt is being replaced, it's an easy matter
for the technician to also replace the items I discuss
below.

>> Any help would be appreciated on this subject
>>
>> Thanks
>>
>> Matt
>
>
> Just wondering, maybe this isnt a head gasket but maybe a
> rocker cover gasket?

Right, it sounds more like what is more commonly called the
"valve cover gasket," also known as the "cylinder head cover
gasket." See Item 2 for the 89 Civic 4-door LX at
http://www.hondaautomotiveparts.com/...DER+HEAD+COVER

This gasket only lasts around 75k miles/five years or so. If
you are a little handy, it is not hard to replace. Tips:

-- Do not overtighten the valve cover cap nuts. They require
only 7 ft-lbs. of torque. A $30 low range torque wrench from
Harbor Freight is an excellent investment. Wait until
Father's Day, and it will probably be on sale. :-)
-- Tighten the valve cover cap nuts evenly (bicycle spoke
fashion) to ensure the gasket is evenly pressured and so
seals properly.
-- Strongly consider also replacing the washers (item 13 at
the site above) beneath the valve cover cap nuts, too. They
tend to harden and start failing after around 100k miles.
-- Strongly consider also replacing the spark plug tube
gaskets (item 3) that fit into the valve cover.
-- Buy only OEM ( = genuine Honda) for all of the above. My
and others' experience is that aftermarket rubber parts do
not last nearly as long as OEM.

The grey plastic cover on the right (as one stands at the
car's front bumper, hood up, looking at the engine) is
indeed the timing belt cover. See item 3 at
http://www.hondaautomotiveparts.com/...FT-TIMING+BELT

But like I say, all these parts can be replaced easily
during a timing belt change.

www.autozone.com has a free online manual for your car.
Getting used to where certain subjects are located within
the online manual takes a little time. You can always ask
here if you can't find something.

BTW, do you have the owner's manual for this car? It has the
maintenance schedule in it.

 

"Matt Mills" <mattjmills@gmail.com> wrote
> Matt Mills wrote:
>> Hi, I have a Honda Civic 1989 Dual Carb that is leaking
>> terribly around the Join between the black head cover and
>> the engine so I am assuming I need a new head gasket
>> (correct me please if I am wrong). This leaking oil is
>> then burning up on the hot engine and manifold and
>> smoking and causing bad smells. How easy is it for a
>> newbie such as myself to replace the head gasket? Also,
>> the grey plastic cover on the right of the engine would
>> be the cover for the cambelt? If so, why do I get a sort
>> of hissing sound from that side of the engine especially
>> when idling? I probably need to get the cambelt changed
>> also soon as my car has done 189,000kms.

The "cam belt" is more frequently called the "timing belt"
these days. If it's never been replaced before on your
Civic, it's way overdue. The replacement frequency is 90k
miles ( = 97k km) or 6 years, whichever comes first, for
your Civic, for non-severe, U.S. driving conditions. You
should have it replaced immediately by a good independent
import shop or a dealer. If it breaks, and at this age, it
could break at any moment, serious damage may result to your
Civic's engine.

A timing belt replacement is not a beginner's job.

While the timing belt is being replaced, it's an easy matter
for the technician to also replace the items I discuss
below.

>> Any help would be appreciated on this subject
>>
>> Thanks
>>
>> Matt
>
>
> Just wondering, maybe this isnt a head gasket but maybe a
> rocker cover gasket?

Right, it sounds more like what is more commonly called the
"valve cover gasket," also known as the "cylinder head cover
gasket." See Item 2 for the 89 Civic 4-door LX at
http://www.hondaautomotiveparts.com/...DER+HEAD+COVER

This gasket only lasts around 75k miles/five years or so. If
you are a little handy, it is not hard to replace. Tips:

-- Do not overtighten the valve cover cap nuts. They require
only 7 ft-lbs. of torque. A $30 low range torque wrench from
Harbor Freight is an excellent investment. Wait until
Father's Day, and it will probably be on sale. :-)
-- Tighten the valve cover cap nuts evenly (bicycle spoke
fashion) to ensure the gasket is evenly pressured and so
seals properly.
-- Strongly consider also replacing the washers (item 13 at
the site above) beneath the valve cover cap nuts, too. They
tend to harden and start failing after around 100k miles.
-- Strongly consider also replacing the spark plug tube
gaskets (item 3) that fit into the valve cover.
-- Buy only OEM ( = genuine Honda) for all of the above. My
and others' experience is that aftermarket rubber parts do
not last nearly as long as OEM.

The grey plastic cover on the right (as one stands at the
car's front bumper, hood up, looking at the engine) is
indeed the timing belt cover. See item 3 at
http://www.hondaautomotiveparts.com/...FT-TIMING+BELT

But like I say, all these parts can be replaced easily
during a timing belt change.

www.autozone.com has a free online manual for your car.
Getting used to where certain subjects are located within
the online manual takes a little time. You can always ask
here if you can't find something.

BTW, do you have the owner's manual for this car? It has the
maintenance schedule in it.

 

"Matt Mills" <mattjmills@gmail.com> wrote
> Matt Mills wrote:
>> Hi, I have a Honda Civic 1989 Dual Carb that is leaking
>> terribly around the Join between the black head cover and
>> the engine so I am assuming I need a new head gasket
>> (correct me please if I am wrong). This leaking oil is
>> then burning up on the hot engine and manifold and
>> smoking and causing bad smells. How easy is it for a
>> newbie such as myself to replace the head gasket? Also,
>> the grey plastic cover on the right of the engine would
>> be the cover for the cambelt? If so, why do I get a sort
>> of hissing sound from that side of the engine especially
>> when idling? I probably need to get the cambelt changed
>> also soon as my car has done 189,000kms.

The "cam belt" is more frequently called the "timing belt"
these days. If it's never been replaced before on your
Civic, it's way overdue. The replacement frequency is 90k
miles ( = 97k km) or 6 years, whichever comes first, for
your Civic, for non-severe, U.S. driving conditions. You
should have it replaced immediately by a good independent
import shop or a dealer. If it breaks, and at this age, it
could break at any moment, serious damage may result to your
Civic's engine.

A timing belt replacement is not a beginner's job.

While the timing belt is being replaced, it's an easy matter
for the technician to also replace the items I discuss
below.

>> Any help would be appreciated on this subject
>>
>> Thanks
>>
>> Matt
>
>
> Just wondering, maybe this isnt a head gasket but maybe a
> rocker cover gasket?

Right, it sounds more like what is more commonly called the
"valve cover gasket," also known as the "cylinder head cover
gasket." See Item 2 for the 89 Civic 4-door LX at
http://www.hondaautomotiveparts.com/...DER+HEAD+COVER

This gasket only lasts around 75k miles/five years or so. If
you are a little handy, it is not hard to replace. Tips:

-- Do not overtighten the valve cover cap nuts. They require
only 7 ft-lbs. of torque. A $30 low range torque wrench from
Harbor Freight is an excellent investment. Wait until
Father's Day, and it will probably be on sale. :-)
-- Tighten the valve cover cap nuts evenly (bicycle spoke
fashion) to ensure the gasket is evenly pressured and so
seals properly.
-- Strongly consider also replacing the washers (item 13 at
the site above) beneath the valve cover cap nuts, too. They
tend to harden and start failing after around 100k miles.
-- Strongly consider also replacing the spark plug tube
gaskets (item 3) that fit into the valve cover.
-- Buy only OEM ( = genuine Honda) for all of the above. My
and others' experience is that aftermarket rubber parts do
not last nearly as long as OEM.

The grey plastic cover on the right (as one stands at the
car's front bumper, hood up, looking at the engine) is
indeed the timing belt cover. See item 3 at
http://www.hondaautomotiveparts.com/...FT-TIMING+BELT

But like I say, all these parts can be replaced easily
during a timing belt change.

www.autozone.com has a free online manual for your car.
Getting used to where certain subjects are located within
the online manual takes a little time. You can always ask
here if you can't find something.

BTW, do you have the owner's manual for this car? It has the
maintenance schedule in it.

 

Michael Pardee wrote:
> "Matt Mills" <mattjmills@gmail.com> wrote in message
> news:e3c3pe$f0c$1@lust.ihug.co.nz...
>> Hi, I have a Honda Civic 1989 Dual Carb that is leaking terribly around
>> the Join between the black head cover and the engine so I am assuming I
>> need a new head gasket (correct me please if I am wrong). This leaking
>> oil is then burning up on the hot engine and manifold and smoking and
>> causing bad smells. How easy is it for a newbie such as myself to replace
>> the head gasket? Also, the grey plastic cover on the right of the engine
>> would be the cover for the cambelt? If so, why do I get a sort of hissing
>> sound from that side of the engine especially when idling? I probably
>> need to get the cambelt changed also soon as my car has done 189,000kms.
>>
>> Any help would be appreciated on this subject
>>
>> Thanks
>>
>> Matt
>
> If I understand your description correctly, what you are describing is a
> leak around your valve cover, which is not unusual. That's a whole lot
> easier to change than a head gasket, which is not a job for a beginner!
>
> OTOH, you mention the cambelt (timing belt) has 189K km. It may also be 17
> years old. It is definitely time to change that belt and if the belt is
> truly the original it is way overdue. DON'T PUT THAT OFF! If the timing belt
> fails there is a serious risk of catastrophic damage to the engine. This is
> not a newbie job, either, although not as expensive as a head gasket to have
> done. It is very advisable to have the water pump replaced at the same time,
> as the belt replacement includes 90% of the water pump labor and a failed
> pump can destroy the belt... and quite possibly your engine.
>
> When you have the timing belt replaced, point out the leakage. Replacing
> that gasket is a part of the timing belt change.
>
> Mike
>
>

The timing belt has been changed at least once in the cars life. ( I
cannot read the mileage on the sticker though. I cannot afford to do
that at the moment, so on the weekend I bought a rocker cover gasket and
took the cover off the engine and replaced that as well as the
air-filter which probably hasn't been changed in 40,000kms. I noticed
that there was a thick layer of congealed/carbonised oil inside the
rocker cover, is this normal/unusual/a concern?

Honda parts aren't cheap here and seeing as this car cost me about
US$300 2 years ago I am reluctant to spend too much money. This week I
will take the car down to the local wash world and clean as much of the
oil off the bottom of the engine as possible so I can see if it is
leaking anywhere else.

Matt

 

Michael Pardee wrote:
> "Matt Mills" <mattjmills@gmail.com> wrote in message
> news:e3c3pe$f0c$1@lust.ihug.co.nz...
>> Hi, I have a Honda Civic 1989 Dual Carb that is leaking terribly around
>> the Join between the black head cover and the engine so I am assuming I
>> need a new head gasket (correct me please if I am wrong). This leaking
>> oil is then burning up on the hot engine and manifold and smoking and
>> causing bad smells. How easy is it for a newbie such as myself to replace
>> the head gasket? Also, the grey plastic cover on the right of the engine
>> would be the cover for the cambelt? If so, why do I get a sort of hissing
>> sound from that side of the engine especially when idling? I probably
>> need to get the cambelt changed also soon as my car has done 189,000kms.
>>
>> Any help would be appreciated on this subject
>>
>> Thanks
>>
>> Matt
>
> If I understand your description correctly, what you are describing is a
> leak around your valve cover, which is not unusual. That's a whole lot
> easier to change than a head gasket, which is not a job for a beginner!
>
> OTOH, you mention the cambelt (timing belt) has 189K km. It may also be 17
> years old. It is definitely time to change that belt and if the belt is
> truly the original it is way overdue. DON'T PUT THAT OFF! If the timing belt
> fails there is a serious risk of catastrophic damage to the engine. This is
> not a newbie job, either, although not as expensive as a head gasket to have
> done. It is very advisable to have the water pump replaced at the same time,
> as the belt replacement includes 90% of the water pump labor and a failed
> pump can destroy the belt... and quite possibly your engine.
>
> When you have the timing belt replaced, point out the leakage. Replacing
> that gasket is a part of the timing belt change.
>
> Mike
>
>

The timing belt has been changed at least once in the cars life. ( I
cannot read the mileage on the sticker though. I cannot afford to do
that at the moment, so on the weekend I bought a rocker cover gasket and
took the cover off the engine and replaced that as well as the
air-filter which probably hasn't been changed in 40,000kms. I noticed
that there was a thick layer of congealed/carbonised oil inside the
rocker cover, is this normal/unusual/a concern?

Honda parts aren't cheap here and seeing as this car cost me about
US$300 2 years ago I am reluctant to spend too much money. This week I
will take the car down to the local wash world and clean as much of the
oil off the bottom of the engine as possible so I can see if it is
leaking anywhere else.

Matt

 

Michael Pardee wrote:
> "Matt Mills" <mattjmills@gmail.com> wrote in message
> news:e3c3pe$f0c$1@lust.ihug.co.nz...
>> Hi, I have a Honda Civic 1989 Dual Carb that is leaking terribly around
>> the Join between the black head cover and the engine so I am assuming I
>> need a new head gasket (correct me please if I am wrong). This leaking
>> oil is then burning up on the hot engine and manifold and smoking and
>> causing bad smells. How easy is it for a newbie such as myself to replace
>> the head gasket? Also, the grey plastic cover on the right of the engine
>> would be the cover for the cambelt? If so, why do I get a sort of hissing
>> sound from that side of the engine especially when idling? I probably
>> need to get the cambelt changed also soon as my car has done 189,000kms.
>>
>> Any help would be appreciated on this subject
>>
>> Thanks
>>
>> Matt
>
> If I understand your description correctly, what you are describing is a
> leak around your valve cover, which is not unusual. That's a whole lot
> easier to change than a head gasket, which is not a job for a beginner!
>
> OTOH, you mention the cambelt (timing belt) has 189K km. It may also be 17
> years old. It is definitely time to change that belt and if the belt is
> truly the original it is way overdue. DON'T PUT THAT OFF! If the timing belt
> fails there is a serious risk of catastrophic damage to the engine. This is
> not a newbie job, either, although not as expensive as a head gasket to have
> done. It is very advisable to have the water pump replaced at the same time,
> as the belt replacement includes 90% of the water pump labor and a failed
> pump can destroy the belt... and quite possibly your engine.
>
> When you have the timing belt replaced, point out the leakage. Replacing
> that gasket is a part of the timing belt change.
>
> Mike
>
>

The timing belt has been changed at least once in the cars life. ( I
cannot read the mileage on the sticker though. I cannot afford to do
that at the moment, so on the weekend I bought a rocker cover gasket and
took the cover off the engine and replaced that as well as the
air-filter which probably hasn't been changed in 40,000kms. I noticed
that there was a thick layer of congealed/carbonised oil inside the
rocker cover, is this normal/unusual/a concern?

Honda parts aren't cheap here and seeing as this car cost me about
US$300 2 years ago I am reluctant to spend too much money. This week I
will take the car down to the local wash world and clean as much of the
oil off the bottom of the engine as possible so I can see if it is
leaking anywhere else.

Matt

 

Matt Mills wrote:
>
> Michael Pardee wrote:
> > "Matt Mills" <mattjmills@gmail.com> wrote in message
> > news:e3c3pe$f0c$1@lust.ihug.co.nz...
> >> Hi, I have a Honda Civic 1989 Dual Carb that is leaking terribly around
> >> the Join between the black head cover and the engine so I am assuming I
> >> need a new head gasket (correct me please if I am wrong). This leaking
> >> oil is then burning up on the hot engine and manifold and smoking and
> >> causing bad smells. How easy is it for a newbie such as myself to replace
> >> the head gasket? Also, the grey plastic cover on the right of the engine
> >> would be the cover for the cambelt? If so, why do I get a sort of hissing
> >> sound from that side of the engine especially when idling? I probably
> >> need to get the cambelt changed also soon as my car has done 189,000kms.
> >>
> >> Any help would be appreciated on this subject
> >>
> >> Thanks
> >>
> >> Matt
> >
> > If I understand your description correctly, what you are describing is a
> > leak around your valve cover, which is not unusual. That's a whole lot
> > easier to change than a head gasket, which is not a job for a beginner!
> >
> > OTOH, you mention the cambelt (timing belt) has 189K km. It may also be 17
> > years old. It is definitely time to change that belt and if the belt is
> > truly the original it is way overdue. DON'T PUT THAT OFF! If the timing belt
> > fails there is a serious risk of catastrophic damage to the engine. This is
> > not a newbie job, either, although not as expensive as a head gasket to have
> > done. It is very advisable to have the water pump replaced at the same time,
> > as the belt replacement includes 90% of the water pump labor and a failed
> > pump can destroy the belt... and quite possibly your engine.
> >
> > When you have the timing belt replaced, point out the leakage. Replacing
> > that gasket is a part of the timing belt change.
> >
> > Mike
> >
> >
>
> The timing belt has been changed at least once in the cars life. ( I
> cannot read the mileage on the sticker though. I cannot afford to do
> that at the moment, so on the weekend I bought a rocker cover gasket and
> took the cover off the engine and replaced that as well as the
> air-filter which probably hasn't been changed in 40,000kms. I noticed
> that there was a thick layer of congealed/carbonised oil inside the
> rocker cover, is this normal/unusual/a concern?
>
> Honda parts aren't cheap here and seeing as this car cost me about
> US$300 2 years ago I am reluctant to spend too much money. This week I
> will take the car down to the local wash world and clean as much of the
> oil off the bottom of the engine as possible so I can see if it is
> leaking anywhere else.
>
> Matt


As Michael pointed out, the timing belt may still be a concern if one
assumes that the belt should be changed every 60K (miles). It might be
that the interval was increased for by 1989 but 60K is typical for older Hondas.

You need to assess what the car is worth as transportation. Is it worth
fixing properly or would it be better to buy a newer vehicle? Is it
worth the risk of major repairs vs. a relatively lower cost routine
maintenance action? Only you can make that decision.

JT

 

Matt Mills wrote:
>
> Michael Pardee wrote:
> > "Matt Mills" <mattjmills@gmail.com> wrote in message
> > news:e3c3pe$f0c$1@lust.ihug.co.nz...
> >> Hi, I have a Honda Civic 1989 Dual Carb that is leaking terribly around
> >> the Join between the black head cover and the engine so I am assuming I
> >> need a new head gasket (correct me please if I am wrong). This leaking
> >> oil is then burning up on the hot engine and manifold and smoking and
> >> causing bad smells. How easy is it for a newbie such as myself to replace
> >> the head gasket? Also, the grey plastic cover on the right of the engine
> >> would be the cover for the cambelt? If so, why do I get a sort of hissing
> >> sound from that side of the engine especially when idling? I probably
> >> need to get the cambelt changed also soon as my car has done 189,000kms.
> >>
> >> Any help would be appreciated on this subject
> >>
> >> Thanks
> >>
> >> Matt
> >
> > If I understand your description correctly, what you are describing is a
> > leak around your valve cover, which is not unusual. That's a whole lot
> > easier to change than a head gasket, which is not a job for a beginner!
> >
> > OTOH, you mention the cambelt (timing belt) has 189K km. It may also be 17
> > years old. It is definitely time to change that belt and if the belt is
> > truly the original it is way overdue. DON'T PUT THAT OFF! If the timing belt
> > fails there is a serious risk of catastrophic damage to the engine. This is
> > not a newbie job, either, although not as expensive as a head gasket to have
> > done. It is very advisable to have the water pump replaced at the same time,
> > as the belt replacement includes 90% of the water pump labor and a failed
> > pump can destroy the belt... and quite possibly your engine.
> >
> > When you have the timing belt replaced, point out the leakage. Replacing
> > that gasket is a part of the timing belt change.
> >
> > Mike
> >
> >
>
> The timing belt has been changed at least once in the cars life. ( I
> cannot read the mileage on the sticker though. I cannot afford to do
> that at the moment, so on the weekend I bought a rocker cover gasket and
> took the cover off the engine and replaced that as well as the
> air-filter which probably hasn't been changed in 40,000kms. I noticed
> that there was a thick layer of congealed/carbonised oil inside the
> rocker cover, is this normal/unusual/a concern?
>
> Honda parts aren't cheap here and seeing as this car cost me about
> US$300 2 years ago I am reluctant to spend too much money. This week I
> will take the car down to the local wash world and clean as much of the
> oil off the bottom of the engine as possible so I can see if it is
> leaking anywhere else.
>
> Matt


As Michael pointed out, the timing belt may still be a concern if one
assumes that the belt should be changed every 60K (miles). It might be
that the interval was increased for by 1989 but 60K is typical for older Hondas.

You need to assess what the car is worth as transportation. Is it worth
fixing properly or would it be better to buy a newer vehicle? Is it
worth the risk of major repairs vs. a relatively lower cost routine
maintenance action? Only you can make that decision.

JT