I have a 1991 Accord 2dr with a SOHC F20A motor. What is the correct part#
or code# for the ECU for this engine. I am using the original F22A ECU and
it does not run to its full potential and the check engine light stays on.
Any help is appreciated.

--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200801/1

 

Have you had the code read for free at, say, Autozone? If
so, what code is it?

ECUs do not generally fail unless the car has been through a
flood and water got inside the ECU casing.

You can get the part number from various online dealer
sites. Try www.bkhondaparts.com first. Put in your vehicle
identifying info, then display all parts, then click on
"control unit."


"spoilaz1 via CarKB.com" <u9920@uwe> wrote
>I have a 1991 Accord 2dr with a SOHC F20A motor. What is
>the correct part#
> or code# for the ECU for this engine. I am using the
> original F22A ECU and
> it does not run to its full potential and the check engine
> light stays on.
> Any help is appreciated.
>
> --
> Message posted via CarKB.com
> http://www.carkb.com/Uwe/Forums.aspx...-cars/200801/1
>

 

"spoilaz1 via CarKB.com" <u9920@uwe> wrote in news:7e44259f22300@uwe:

> I have a 1991 Accord 2dr with a SOHC F20A motor. What is the correct
> part# or code# for the ECU for this engine. I am using the original
> F22A ECU and it does not run to its full potential and the check
> engine light stays on. Any help is appreciated.
>


What is the stored error code? You don't replace the ECU just because the
light is on. The code might be legit.

And please define "does not run to its full potential". That statement by
itself is pretty subjective. A seventeen year-old car can have all kinds of
problems entirely unrelated to the ECU.

Do you have an automatic ECU in a manual car?

--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/