DIY: Installing a Deck Lid Spoiler on a 2006 Accord Sedan - GTcarz

11-20-2005 | 10:18 PM

#1

G-Man

Guest

Posts: n/a

DIY: Installing a Deck Lid Spoiler on a 2006 Accord Sedan

If anyone is interested:

http://gwfweb.com/honda/06accord/06splr.htm

G-Man

Reply

11-21-2005 | 08:42 PM

#2

LBJGH

Guest

Posts: n/a

Re: Installing a Deck Lid Spoiler on a 2006 Accord Sedan

Nice DYI... too bad Newmarket Honda didn't have your instructions... they
didn't even paint the bare metal after drilling the holes in my 04 accord.

I had to take the car back into 'em to remove the spoiler paint the holes...
and they ended up getting paint on my back window... to boot they left the
adhesive strips hanging out from under the rear spoiler. ... real shoe
makers!

O

"G-Man" <shoot.digital@gmail.com> wrote in message
news:nN2dna9OPsXpoRzeRVn-tQ@adelphia.com...
> If anyone is interested:
>
> http://gwfweb.com/honda/06accord/06splr.htm
>
> G-Man
>

Reply

11-21-2005 | 10:43 PM

#3

G-Man

Guest

Posts: n/a

Re: Installing a Deck Lid Spoiler on a 2006 Accord Sedan

Same thing on my '01. I had to raise the wing spoiler a while back because
the gasket was coming out, and the holes are all rusted to hell.

If you want it done right....

G-Man

"LBJGH" <bite_mee@hotsnail.back> wrote in message
news:leWdncfFocbP6h_enZ2dnUVZ_tmdnZ2d@rogers.com.. .
> Nice DYI... too bad Newmarket Honda didn't have your instructions... they
> didn't even paint the bare metal after drilling the holes in my 04 accord.
>

>
> I had to take the car back into 'em to remove the spoiler paint the
> holes... and they ended up getting paint on my back window... to boot
> they left the adhesive strips hanging out from under the rear spoiler.
> ... real shoe makers!
>
> O
>
> "G-Man" <shoot.digital@gmail.com> wrote in message
> news:nN2dna9OPsXpoRzeRVn-tQ@adelphia.com...
>> If anyone is interested:
>>
>> http://gwfweb.com/honda/06accord/06splr.htm
>>
>> G-Man
>>
>
>

Reply

11-22-2005 | 01:17 AM

#4

LBJGH

Guest

Posts: n/a

Re: Installing a Deck Lid Spoiler on a 2006 Accord Sedan

So true, I have two rattles I want to get fixed but I'm afraid the local
dealer will screw up my car worse than it is.

One is with my headliner in the area of the sunglasses holder... I stuffed
some shop cloths between the roof the headliner which works OK but not 100%
and the other is the drivers door/window but I don't have the nerve to pull
the door panel...

I wish there were some trustworthy shops in my area...

On a side note can Acura service Hondas?

>
> If you want it done right....
>
> G-Man
>
>
> "LBJGH" <bite_mee@hotsnail.back> wrote in message
> news:leWdncfFocbP6h_enZ2dnUVZ_tmdnZ2d@rogers.com.. .
>> Nice DYI... too bad Newmarket Honda didn't have your instructions... they
>> didn't even paint the bare metal after drilling the holes in my 04
>> accord.

>>
>> I had to take the car back into 'em to remove the spoiler paint the
>> holes... and they ended up getting paint on my back window... to boot
>> they left the adhesive strips hanging out from under the rear spoiler.
>> ... real shoe makers!
>>
>> O
>>
>> "G-Man" <shoot.digital@gmail.com> wrote in message
>> news:nN2dna9OPsXpoRzeRVn-tQ@adelphia.com...
>>> If anyone is interested:
>>>
>>> http://gwfweb.com/honda/06accord/06splr.htm
>>>
>>> G-Man
>>>
>>
>>
>
>

Reply