I just got a call from a Goodyear shop doing my daughter's Civic's oil
change and the said that both front axle boots, i.e., cv joints are bad
and want $289 each to replace. I declined since I don't have $600.

The car has about 76k and drives perfect wih no vibration or noise.

Is there any good way to check yourself to see if these need replacing?

Thanks guys.

RonT

 

Go to a couple of other shops have them check them out. Let them understand
that you are looking for the best deal it they are truly bad. I just had one
axel done for about $200.00. Would have done it myself but its to cold now.
"Ron Truitt" <mextex1@webtv.net> wrote in message
news:20835-41DCB218-232@storefull-3172.bay.webtv.net...
>I just got a call from a Goodyear shop doing my daughter's Civic's oil
> change and the said that both front axle boots, i.e., cv joints are bad
> and want $289 each to replace. I declined since I don't have $600.
>
> The car has about 76k and drives perfect wih no vibration or noise.
>
> Is there any good way to check yourself to see if these need replacing?
>
> Thanks guys.
>
> RonT
>

 

Go to a couple of other shops have them check them out. Let them understand
that you are looking for the best deal it they are truly bad. I just had one
axel done for about $200.00. Would have done it myself but its to cold now.
"Ron Truitt" <mextex1@webtv.net> wrote in message
news:20835-41DCB218-232@storefull-3172.bay.webtv.net...
>I just got a call from a Goodyear shop doing my daughter's Civic's oil
> change and the said that both front axle boots, i.e., cv joints are bad
> and want $289 each to replace. I declined since I don't have $600.
>
> The car has about 76k and drives perfect wih no vibration or noise.
>
> Is there any good way to check yourself to see if these need replacing?
>
> Thanks guys.
>
> RonT
>

 

600 for cv's? i paid 115 taxes inc CAD for one installed on my 95 civic


"jim cronin" <jcronin1@nycap.rr.com> wrote in message
news:AT2Dd.126958$Uf.41574@twister.nyroc.rr.com...
> Go to a couple of other shops have them check them out. Let them
> understand that you are looking for the best deal it they are truly bad. I
> just had one axel done for about $200.00. Would have done it myself but
> its to cold now.
> "Ron Truitt" <mextex1@webtv.net> wrote in message
> news:20835-41DCB218-232@storefull-3172.bay.webtv.net...
>>I just got a call from a Goodyear shop doing my daughter's Civic's oil
>> change and the said that both front axle boots, i.e., cv joints are bad
>> and want $289 each to replace. I declined since I don't have $600.
>>
>> The car has about 76k and drives perfect wih no vibration or noise.
>>
>> Is there any good way to check yourself to see if these need replacing?
>>
>> Thanks guys.
>>
>> RonT
>>
>
>

 

600 for cv's? i paid 115 taxes inc CAD for one installed on my 95 civic


"jim cronin" <jcronin1@nycap.rr.com> wrote in message
news:AT2Dd.126958$Uf.41574@twister.nyroc.rr.com...
> Go to a couple of other shops have them check them out. Let them
> understand that you are looking for the best deal it they are truly bad. I
> just had one axel done for about $200.00. Would have done it myself but
> its to cold now.
> "Ron Truitt" <mextex1@webtv.net> wrote in message
> news:20835-41DCB218-232@storefull-3172.bay.webtv.net...
>>I just got a call from a Goodyear shop doing my daughter's Civic's oil
>> change and the said that both front axle boots, i.e., cv joints are bad
>> and want $289 each to replace. I declined since I don't have $600.
>>
>> The car has about 76k and drives perfect wih no vibration or noise.
>>
>> Is there any good way to check yourself to see if these need replacing?
>>
>> Thanks guys.
>>
>> RonT
>>
>
>

 

"Ron Truitt" <mextex1@webtv.net> wrote in message
news:20835-41DCB218-232@storefull-3172.bay.webtv.net...
>I just got a call from a Goodyear shop doing my daughter's Civic's oil
> change and the said that both front axle boots, i.e., cv joints are bad
> and want $289 each to replace. I declined since I don't have $600.
>
> The car has about 76k and drives perfect wih no vibration or noise.
>
> Is there any good way to check yourself to see if these need replacing?
>
> Thanks guys.
>
> RonT

Hello Ron,
Two checks are possible but not totally reliable. I assume that the cv boots
are torn/split. Get up under the car and check that. If they have splits or
tears in them, check for grease still inside the boots. If grease is still
present, you might be able to get by simply by cleaning the joints and
replacing the boots. The other check is to listen to each joint as the wheel
is turned. If you hear a clicking sound the joint should be replaced.
Usually, the least expensive route is to replace the entire cv axle. Check
with a reputable parts store for the price on a remanufactured cv axle as
opposed to a cv joint repair kit. A final option, is to take the vehicle to
Sears and have a front end inspection done. When I worked at an Automotive
Center (Sears), there was no charge for this service and you were given an
estimate for the repair work. I don't know if that is still the case. Hope
this helps.

Dave Dodson

 

"Ron Truitt" <mextex1@webtv.net> wrote in message
news:20835-41DCB218-232@storefull-3172.bay.webtv.net...
>I just got a call from a Goodyear shop doing my daughter's Civic's oil
> change and the said that both front axle boots, i.e., cv joints are bad
> and want $289 each to replace. I declined since I don't have $600.
>
> The car has about 76k and drives perfect wih no vibration or noise.
>
> Is there any good way to check yourself to see if these need replacing?
>
> Thanks guys.
>
> RonT

Hello Ron,
Two checks are possible but not totally reliable. I assume that the cv boots
are torn/split. Get up under the car and check that. If they have splits or
tears in them, check for grease still inside the boots. If grease is still
present, you might be able to get by simply by cleaning the joints and
replacing the boots. The other check is to listen to each joint as the wheel
is turned. If you hear a clicking sound the joint should be replaced.
Usually, the least expensive route is to replace the entire cv axle. Check
with a reputable parts store for the price on a remanufactured cv axle as
opposed to a cv joint repair kit. A final option, is to take the vehicle to
Sears and have a front end inspection done. When I worked at an Automotive
Center (Sears), there was no charge for this service and you were given an
estimate for the repair work. I don't know if that is still the case. Hope
this helps.

Dave Dodson

 

"DaveD" <dave6985@hotmail.com> wrote in message
news:10tphudsgb9kbf0@corp.supernews.com...
>
> "Ron Truitt" <mextex1@webtv.net> wrote in message
> news:20835-41DCB218-232@storefull-3172.bay.webtv.net...
>>I just got a call from a Goodyear shop doing my daughter's Civic's oil
>> change and the said that both front axle boots, i.e., cv joints are bad
>> and want $289 each to replace. I declined since I don't have $600.
>>
>> The car has about 76k and drives perfect wih no vibration or noise.
>>
>> Is there any good way to check yourself to see if these need replacing?
>>
>> Thanks guys.
>>
>> RonT
>
> Hello Ron,
> Two checks are possible but not totally reliable. I assume that the cv
> boots are torn/split. Get up under the car and check that. If they have
> splits or tears in them, check for grease still inside the boots. If
> grease is still present, you might be able to get by simply by cleaning
> the joints and replacing the boots. The other check is to listen to each
> joint as the wheel is turned. If you hear a clicking sound the joint
> should be replaced. Usually, the least expensive route is to replace the
> entire cv axle. Check with a reputable parts store for the price on a
> remanufactured cv axle as opposed to a cv joint repair kit. A final
> option, is to take the vehicle to Sears and have a front end inspection
> done. When I worked at an Automotive Center (Sears), there was no charge
> for this service and you were given an estimate for the repair work. I
> don't know if that is still the case. Hope this helps.
>
> Dave Dodson
>
To clarify: replacing the boots with original style would require removing
an reinstalling the driveaxles, with at least as much labor as the full
replacement. But "split boots" are available that go on the way Dave
describes. Not many shops will do the split boot thing because the
cost/liability is not good They may get the customer coming back and
complaining that it *still* isn't right and want the shop to do the full job
for free to make it right... some customers really are that way. Split boots
are intended for a DIY repair, and are messy but don't require special tools
or skills.

Don't wait too long to decide, because when water gets into the grease it
becomes waxy and doesn't lubricate, causing the joint to go bad quickly.

Mike

 

"DaveD" <dave6985@hotmail.com> wrote in message
news:10tphudsgb9kbf0@corp.supernews.com...
>
> "Ron Truitt" <mextex1@webtv.net> wrote in message
> news:20835-41DCB218-232@storefull-3172.bay.webtv.net...
>>I just got a call from a Goodyear shop doing my daughter's Civic's oil
>> change and the said that both front axle boots, i.e., cv joints are bad
>> and want $289 each to replace. I declined since I don't have $600.
>>
>> The car has about 76k and drives perfect wih no vibration or noise.
>>
>> Is there any good way to check yourself to see if these need replacing?
>>
>> Thanks guys.
>>
>> RonT
>
> Hello Ron,
> Two checks are possible but not totally reliable. I assume that the cv
> boots are torn/split. Get up under the car and check that. If they have
> splits or tears in them, check for grease still inside the boots. If
> grease is still present, you might be able to get by simply by cleaning
> the joints and replacing the boots. The other check is to listen to each
> joint as the wheel is turned. If you hear a clicking sound the joint
> should be replaced. Usually, the least expensive route is to replace the
> entire cv axle. Check with a reputable parts store for the price on a
> remanufactured cv axle as opposed to a cv joint repair kit. A final
> option, is to take the vehicle to Sears and have a front end inspection
> done. When I worked at an Automotive Center (Sears), there was no charge
> for this service and you were given an estimate for the repair work. I
> don't know if that is still the case. Hope this helps.
>
> Dave Dodson
>
To clarify: replacing the boots with original style would require removing
an reinstalling the driveaxles, with at least as much labor as the full
replacement. But "split boots" are available that go on the way Dave
describes. Not many shops will do the split boot thing because the
cost/liability is not good They may get the customer coming back and
complaining that it *still* isn't right and want the shop to do the full job
for free to make it right... some customers really are that way. Split boots
are intended for a DIY repair, and are messy but don't require special tools
or skills.

Don't wait too long to decide, because when water gets into the grease it
becomes waxy and doesn't lubricate, causing the joint to go bad quickly.

Mike

 

Ron,

somehow get under the car yourself to inspect the 'bad' boots. make
sure the boots are dry from rain or standing water from the road and
look for deep cracks, or cracks that are leaking grease. if you find
leaking grease then replace the boots. If in fact you need the boots,
as an alternate repair option, you may consider replacing the axles
with fully rebuilt replacements that include a new boot and grease.
It might be cheaper than 298 * 2 for the whole job.

i replaced a boot myself, its a bicht, and messy. too much work for
a DIY job. I did the job and the repair was just beautiful and is
still in operation. I swore i would never do that again but would go
the rebuilt axle route becuase its much cleaner.

I am suspicious because you say there is no apparent noise or
vibration. Your mechanic may just be giving you some preventative
advice, but what if your current boots just looked bad but could last
another 50,000 miles? I cant see your boots, but you have to make
that call yourself. I usually replace my boots if they break and I
have never had a problem with them afterwards since I catch all that
stuff early.

good luck, its up to you.

Tom



On Wed, 5 Jan 2005 21:35:52 -0600, mextex1@webtv.net (Ron Truitt)
wrote:

>I just got a call from a Goodyear shop doing my daughter's Civic's oil
>change and the said that both front axle boots, i.e., cv joints are bad
>and want $289 each to replace. I declined since I don't have $600.
>
>The car has about 76k and drives perfect wih no vibration or noise.
>
>Is there any good way to check yourself to see if these need replacing?
>
>Thanks guys.
>
>RonT

 

Ron,

somehow get under the car yourself to inspect the 'bad' boots. make
sure the boots are dry from rain or standing water from the road and
look for deep cracks, or cracks that are leaking grease. if you find
leaking grease then replace the boots. If in fact you need the boots,
as an alternate repair option, you may consider replacing the axles
with fully rebuilt replacements that include a new boot and grease.
It might be cheaper than 298 * 2 for the whole job.

i replaced a boot myself, its a bicht, and messy. too much work for
a DIY job. I did the job and the repair was just beautiful and is
still in operation. I swore i would never do that again but would go
the rebuilt axle route becuase its much cleaner.

I am suspicious because you say there is no apparent noise or
vibration. Your mechanic may just be giving you some preventative
advice, but what if your current boots just looked bad but could last
another 50,000 miles? I cant see your boots, but you have to make
that call yourself. I usually replace my boots if they break and I
have never had a problem with them afterwards since I catch all that
stuff early.

good luck, its up to you.

Tom



On Wed, 5 Jan 2005 21:35:52 -0600, mextex1@webtv.net (Ron Truitt)
wrote:

>I just got a call from a Goodyear shop doing my daughter's Civic's oil
>change and the said that both front axle boots, i.e., cv joints are bad
>and want $289 each to replace. I declined since I don't have $600.
>
>The car has about 76k and drives perfect wih no vibration or noise.
>
>Is there any good way to check yourself to see if these need replacing?
>
>Thanks guys.
>
>RonT

 

Thanks guys.

I have a sneaking suspicion that they are OK but will do some poking
around and go from there.

RonT

 

Thanks guys.

I have a sneaking suspicion that they are OK but will do some poking
around and go from there.

RonT

 

"Ron Truitt" <mextex1@webtv.net> wrote in message
news:20835-41DE0F6B-324@storefull-3172.bay.webtv.net...
> Thanks guys.
>
> I have a sneaking suspicion that they are OK but will do some poking
> around and go from there.
>
> RonT
>
Good idea. It is hard to miss a bad boot - it slings dark grease all around
the area near the inside of the wheel.

Mike

 

"Ron Truitt" <mextex1@webtv.net> wrote in message
news:20835-41DE0F6B-324@storefull-3172.bay.webtv.net...
> Thanks guys.
>
> I have a sneaking suspicion that they are OK but will do some poking
> around and go from there.
>
> RonT
>
Good idea. It is hard to miss a bad boot - it slings dark grease all around
the area near the inside of the wheel.

Mike