>
> > Thanks in advance.Pads, rotors and drums.
>
> If you are hearing metal scraping, just get them replaced.
>
> Only question I have is why you drove with the parking brake on?

Hi,
This was my first car and I was driving it home from the shop. I forgot
the parking brake and did not see the red light on the dash probably
because of excitement. Later when I came home and tried to pull the
brake, I found that it was already ON. Ops!

Could the brake problem be due to that? Thanks in advance.

 

On 12 Oct 2006 08:20:43 -0700, ExtremeValue wrote:

>>
>>> Thanks in advance.Pads, rotors and drums.
>>
>> If you are hearing metal scraping, just get them replaced.
>>
>> Only question I have is why you drove with the parking brake on?
>
> Hi,
> This was my first car and I was driving it home from the shop. I forgot
> the parking brake and did not see the red light on the dash probably
> because of excitement. Later when I came home and tried to pull the
> brake, I found that it was already ON. Ops!
>
> Could the brake problem be due to that? Thanks in advance.

How far was it on? If it was just enough to turn on the light, probably
not, but if it provided resistance while you were driving, then it
certainly could cause problems.

But, the biggest problems it would cause (considering that it is working OK
otherwise now) would be worm drums and shoes in the rear.

When the drums wear down, there is a ridge formed inside. If the channel
is deep enough, the metal from the shoes may be contacting the drums,
causing your noise. Replace the drums, and the shoes. Use OEM. It won't
be too terribly expensive...

--
Joseph M. LaVigne
jlavigne@hits-buffalo.com
http://www.thelavignefamily.us/MyPipePages/ - 10/13/2006 2:32:21 AM
Tobacconist Brick and Mortar Database: http://bam.tobaccocellar.org/

A pipe gives a wise man time to think and a fool something to stick in
his mouth. -- Anonymous

 

On 12 Oct 2006 08:20:43 -0700, ExtremeValue wrote:

>>
>>> Thanks in advance.Pads, rotors and drums.
>>
>> If you are hearing metal scraping, just get them replaced.
>>
>> Only question I have is why you drove with the parking brake on?
>
> Hi,
> This was my first car and I was driving it home from the shop. I forgot
> the parking brake and did not see the red light on the dash probably
> because of excitement. Later when I came home and tried to pull the
> brake, I found that it was already ON. Ops!
>
> Could the brake problem be due to that? Thanks in advance.

How far was it on? If it was just enough to turn on the light, probably
not, but if it provided resistance while you were driving, then it
certainly could cause problems.

But, the biggest problems it would cause (considering that it is working OK
otherwise now) would be worm drums and shoes in the rear.

When the drums wear down, there is a ridge formed inside. If the channel
is deep enough, the metal from the shoes may be contacting the drums,
causing your noise. Replace the drums, and the shoes. Use OEM. It won't
be too terribly expensive...

--
Joseph M. LaVigne
jlavigne@hits-buffalo.com
http://www.thelavignefamily.us/MyPipePages/ - 10/13/2006 2:32:21 AM
Tobacconist Brick and Mortar Database: http://bam.tobaccocellar.org/

A pipe gives a wise man time to think and a fool something to stick in
his mouth. -- Anonymous

 

On 12 Oct 2006 08:20:43 -0700, ExtremeValue wrote:

>>
>>> Thanks in advance.Pads, rotors and drums.
>>
>> If you are hearing metal scraping, just get them replaced.
>>
>> Only question I have is why you drove with the parking brake on?
>
> Hi,
> This was my first car and I was driving it home from the shop. I forgot
> the parking brake and did not see the red light on the dash probably
> because of excitement. Later when I came home and tried to pull the
> brake, I found that it was already ON. Ops!
>
> Could the brake problem be due to that? Thanks in advance.

How far was it on? If it was just enough to turn on the light, probably
not, but if it provided resistance while you were driving, then it
certainly could cause problems.

But, the biggest problems it would cause (considering that it is working OK
otherwise now) would be worm drums and shoes in the rear.

When the drums wear down, there is a ridge formed inside. If the channel
is deep enough, the metal from the shoes may be contacting the drums,
causing your noise. Replace the drums, and the shoes. Use OEM. It won't
be too terribly expensive...

--
Joseph M. LaVigne
jlavigne@hits-buffalo.com
http://www.thelavignefamily.us/MyPipePages/ - 10/13/2006 2:32:21 AM
Tobacconist Brick and Mortar Database: http://bam.tobaccocellar.org/

A pipe gives a wise man time to think and a fool something to stick in
his mouth. -- Anonymous

 

Joe LaVigne wrote:
> On 12 Oct 2006 08:20:43 -0700, ExtremeValue wrote:
>
> >>
> >>> Thanks in advance.Pads, rotors and drums.
> >>
> >> If you are hearing metal scraping, just get them replaced.
> >>
> >> Only question I have is why you drove with the parking brake on?
> >
> > Hi,
> > This was my first car and I was driving it home from the shop. I forgot
> > the parking brake and did not see the red light on the dash probably
> > because of excitement. Later when I came home and tried to pull the
> > brake, I found that it was already ON. Ops!
> >
> > Could the brake problem be due to that? Thanks in advance.
>
> How far was it on? If it was just enough to turn on the light, probably
> not, but if it provided resistance while you were driving, then it
> certainly could cause problems.
>

It was for about 15km in a city driving and yes, I was feeling the
resistance when ease off the gas pedal.

By the way, I took the car to Midas (as they inspect brakes for free)
yesterday. They removed all the wheels and showed me everything, rotor,
drums and etc. They guy said that he found no reason to change the pads
(only 8 months old) or the drums. There were no unwanted scratches or
ridges either on drums or wheels. Misteriously when I drove out of
Midas there was no noise at all. BUT after a while (1 hour or so) the
same old noise came again.

I suspect that the pads are not of good quality and has some low
quality metals in it that is causing the noise. Since the pads are not
worn at all and the drums are good, I wish I will change them next
year. There has been no problem in braking time or quality, though.

Thanks for your reply to me. It really helps for newbie people here.




> But, the biggest problems it would cause (considering that it is working OK
> otherwise now) would be worm drums and shoes in the rear.
>
> When the drums wear down, there is a ridge formed inside. If the channel
> is deep enough, the metal from the shoes may be contacting the drums,
> causing your noise. Replace the drums, and the shoes. Use OEM. It won't
> be too terribly expensive...
>
> --
> Joseph M. LaVigne
> jlavigne@hits-buffalo.com
> http://www.thelavignefamily.us/MyPipePages/ - 10/13/2006 2:32:21 AM
> Tobacconist Brick and Mortar Database: http://bam.tobaccocellar.org/
>
> A pipe gives a wise man time to think and a fool something to stick in
> his mouth. -- Anonymous

 

Joe LaVigne wrote:
> On 12 Oct 2006 08:20:43 -0700, ExtremeValue wrote:
>
> >>
> >>> Thanks in advance.Pads, rotors and drums.
> >>
> >> If you are hearing metal scraping, just get them replaced.
> >>
> >> Only question I have is why you drove with the parking brake on?
> >
> > Hi,
> > This was my first car and I was driving it home from the shop. I forgot
> > the parking brake and did not see the red light on the dash probably
> > because of excitement. Later when I came home and tried to pull the
> > brake, I found that it was already ON. Ops!
> >
> > Could the brake problem be due to that? Thanks in advance.
>
> How far was it on? If it was just enough to turn on the light, probably
> not, but if it provided resistance while you were driving, then it
> certainly could cause problems.
>

It was for about 15km in a city driving and yes, I was feeling the
resistance when ease off the gas pedal.

By the way, I took the car to Midas (as they inspect brakes for free)
yesterday. They removed all the wheels and showed me everything, rotor,
drums and etc. They guy said that he found no reason to change the pads
(only 8 months old) or the drums. There were no unwanted scratches or
ridges either on drums or wheels. Misteriously when I drove out of
Midas there was no noise at all. BUT after a while (1 hour or so) the
same old noise came again.

I suspect that the pads are not of good quality and has some low
quality metals in it that is causing the noise. Since the pads are not
worn at all and the drums are good, I wish I will change them next
year. There has been no problem in braking time or quality, though.

Thanks for your reply to me. It really helps for newbie people here.




> But, the biggest problems it would cause (considering that it is working OK
> otherwise now) would be worm drums and shoes in the rear.
>
> When the drums wear down, there is a ridge formed inside. If the channel
> is deep enough, the metal from the shoes may be contacting the drums,
> causing your noise. Replace the drums, and the shoes. Use OEM. It won't
> be too terribly expensive...
>
> --
> Joseph M. LaVigne
> jlavigne@hits-buffalo.com
> http://www.thelavignefamily.us/MyPipePages/ - 10/13/2006 2:32:21 AM
> Tobacconist Brick and Mortar Database: http://bam.tobaccocellar.org/
>
> A pipe gives a wise man time to think and a fool something to stick in
> his mouth. -- Anonymous

 

Joe LaVigne wrote:
> On 12 Oct 2006 08:20:43 -0700, ExtremeValue wrote:
>
> >>
> >>> Thanks in advance.Pads, rotors and drums.
> >>
> >> If you are hearing metal scraping, just get them replaced.
> >>
> >> Only question I have is why you drove with the parking brake on?
> >
> > Hi,
> > This was my first car and I was driving it home from the shop. I forgot
> > the parking brake and did not see the red light on the dash probably
> > because of excitement. Later when I came home and tried to pull the
> > brake, I found that it was already ON. Ops!
> >
> > Could the brake problem be due to that? Thanks in advance.
>
> How far was it on? If it was just enough to turn on the light, probably
> not, but if it provided resistance while you were driving, then it
> certainly could cause problems.
>

It was for about 15km in a city driving and yes, I was feeling the
resistance when ease off the gas pedal.

By the way, I took the car to Midas (as they inspect brakes for free)
yesterday. They removed all the wheels and showed me everything, rotor,
drums and etc. They guy said that he found no reason to change the pads
(only 8 months old) or the drums. There were no unwanted scratches or
ridges either on drums or wheels. Misteriously when I drove out of
Midas there was no noise at all. BUT after a while (1 hour or so) the
same old noise came again.

I suspect that the pads are not of good quality and has some low
quality metals in it that is causing the noise. Since the pads are not
worn at all and the drums are good, I wish I will change them next
year. There has been no problem in braking time or quality, though.

Thanks for your reply to me. It really helps for newbie people here.




> But, the biggest problems it would cause (considering that it is working OK
> otherwise now) would be worm drums and shoes in the rear.
>
> When the drums wear down, there is a ridge formed inside. If the channel
> is deep enough, the metal from the shoes may be contacting the drums,
> causing your noise. Replace the drums, and the shoes. Use OEM. It won't
> be too terribly expensive...
>
> --
> Joseph M. LaVigne
> jlavigne@hits-buffalo.com
> http://www.thelavignefamily.us/MyPipePages/ - 10/13/2006 2:32:21 AM
> Tobacconist Brick and Mortar Database: http://bam.tobaccocellar.org/
>
> A pipe gives a wise man time to think and a fool something to stick in
> his mouth. -- Anonymous

 

ExtremeValue wrote:
> Hello experts:
>
> I take this opportunity to post my problem with brakes. I bought this
> 1996 civic with 209Kkm. At that time they changed the read brake pads
> (they most probably put after market cheap pads).
>
> Since then the left rear brake always creates dragging noise wheneven I
> step on brake. On light braking the noise is audible but not when hard
> pressed. I should here mention that I drove with the parking brake ON
> some 18-20 km on the first day I bought this vehicle. But I can't
> remember if this noise is after or before driving with parking brake
> ON.
>
> I took this vehicle to a mechanic and he inspected and found nothing
> wrong but only draggin at one point on the left rear wheel. He told me
> that because the pads are new its causing noise. But the noise is still
> there even after 8 months (now it is 220Kkm) of driving.
>
> When I brake slowly to stop on a red light, I feel that the pads are
> touching hard on a particular point of the rotor (soft otherwise) and
> hence the stopping is somewhat stop-n-go type. When I step on brak on
> highways I feel the vibration (up and down) on the brak pedal. The
> feeling is something like pressing the pads on an uneven rotor. I am
> not a native English speaker so its hard to explain it.
>
The brake pedal pulsing or vibration is probably caused by a warped
front rotor or rear brake drum. Overheating a brake drum can cause it
to warp, that is get out of round. This overheating might have occurred
when you drove with the parking brake on.

> I was thinking of taking it to a honda dealer to have a look at it and
> have the problem fixed with possibly a new set of pads. Any suggestions
> about what the dealer might suggest to replace?
>
> Thanks in advance.
>
>
>
>
> Steve IA wrote:
>> Sorry if this is an old question but I googled and couldn't find an answer.
>> While rotating by tires this past weekend I ogled the front brake pads and
>> they looked like they could be worn some. The car has 95,000 mostly highway
>> miles on it and don't believe it's ever had the brake pads replaced. I've
>> had the car since 34,000.
>> I've changed brake pads on several US made cars without any trouble and the
>> Civic's look pretty straight forward. Is this something a normally handy
>> shadetree mechanic can handle successfully? Any caveats or tips?
>> Thanks in advance for your help.
>>
>> Steve
>> southiowa
>

 

ExtremeValue wrote:
> Hello experts:
>
> I take this opportunity to post my problem with brakes. I bought this
> 1996 civic with 209Kkm. At that time they changed the read brake pads
> (they most probably put after market cheap pads).
>
> Since then the left rear brake always creates dragging noise wheneven I
> step on brake. On light braking the noise is audible but not when hard
> pressed. I should here mention that I drove with the parking brake ON
> some 18-20 km on the first day I bought this vehicle. But I can't
> remember if this noise is after or before driving with parking brake
> ON.
>
> I took this vehicle to a mechanic and he inspected and found nothing
> wrong but only draggin at one point on the left rear wheel. He told me
> that because the pads are new its causing noise. But the noise is still
> there even after 8 months (now it is 220Kkm) of driving.
>
> When I brake slowly to stop on a red light, I feel that the pads are
> touching hard on a particular point of the rotor (soft otherwise) and
> hence the stopping is somewhat stop-n-go type. When I step on brak on
> highways I feel the vibration (up and down) on the brak pedal. The
> feeling is something like pressing the pads on an uneven rotor. I am
> not a native English speaker so its hard to explain it.
>
The brake pedal pulsing or vibration is probably caused by a warped
front rotor or rear brake drum. Overheating a brake drum can cause it
to warp, that is get out of round. This overheating might have occurred
when you drove with the parking brake on.

> I was thinking of taking it to a honda dealer to have a look at it and
> have the problem fixed with possibly a new set of pads. Any suggestions
> about what the dealer might suggest to replace?
>
> Thanks in advance.
>
>
>
>
> Steve IA wrote:
>> Sorry if this is an old question but I googled and couldn't find an answer.
>> While rotating by tires this past weekend I ogled the front brake pads and
>> they looked like they could be worn some. The car has 95,000 mostly highway
>> miles on it and don't believe it's ever had the brake pads replaced. I've
>> had the car since 34,000.
>> I've changed brake pads on several US made cars without any trouble and the
>> Civic's look pretty straight forward. Is this something a normally handy
>> shadetree mechanic can handle successfully? Any caveats or tips?
>> Thanks in advance for your help.
>>
>> Steve
>> southiowa
>

 

ExtremeValue wrote:
> Hello experts:
>
> I take this opportunity to post my problem with brakes. I bought this
> 1996 civic with 209Kkm. At that time they changed the read brake pads
> (they most probably put after market cheap pads).
>
> Since then the left rear brake always creates dragging noise wheneven I
> step on brake. On light braking the noise is audible but not when hard
> pressed. I should here mention that I drove with the parking brake ON
> some 18-20 km on the first day I bought this vehicle. But I can't
> remember if this noise is after or before driving with parking brake
> ON.
>
> I took this vehicle to a mechanic and he inspected and found nothing
> wrong but only draggin at one point on the left rear wheel. He told me
> that because the pads are new its causing noise. But the noise is still
> there even after 8 months (now it is 220Kkm) of driving.
>
> When I brake slowly to stop on a red light, I feel that the pads are
> touching hard on a particular point of the rotor (soft otherwise) and
> hence the stopping is somewhat stop-n-go type. When I step on brak on
> highways I feel the vibration (up and down) on the brak pedal. The
> feeling is something like pressing the pads on an uneven rotor. I am
> not a native English speaker so its hard to explain it.
>
The brake pedal pulsing or vibration is probably caused by a warped
front rotor or rear brake drum. Overheating a brake drum can cause it
to warp, that is get out of round. This overheating might have occurred
when you drove with the parking brake on.

> I was thinking of taking it to a honda dealer to have a look at it and
> have the problem fixed with possibly a new set of pads. Any suggestions
> about what the dealer might suggest to replace?
>
> Thanks in advance.
>
>
>
>
> Steve IA wrote:
>> Sorry if this is an old question but I googled and couldn't find an answer.
>> While rotating by tires this past weekend I ogled the front brake pads and
>> they looked like they could be worn some. The car has 95,000 mostly highway
>> miles on it and don't believe it's ever had the brake pads replaced. I've
>> had the car since 34,000.
>> I've changed brake pads on several US made cars without any trouble and the
>> Civic's look pretty straight forward. Is this something a normally handy
>> shadetree mechanic can handle successfully? Any caveats or tips?
>> Thanks in advance for your help.
>>
>> Steve
>> southiowa
>

 

ExtremeValue wrote:
> Joe LaVigne wrote:
> > On 12 Oct 2006 08:20:43 -0700, ExtremeValue wrote:
> >
> > >>
> > >>> Thanks in advance.Pads, rotors and drums.
> > >>
> > >> If you are hearing metal scraping, just get them replaced.
> > >>
> > >> Only question I have is why you drove with the parking brake on?
> > >
> > > Hi,
> > > This was my first car and I was driving it home from the shop. I forgot
> > > the parking brake and did not see the red light on the dash probably
> > > because of excitement. Later when I came home and tried to pull the
> > > brake, I found that it was already ON. Ops!
> > >
> > > Could the brake problem be due to that? Thanks in advance.
> >
> > How far was it on? If it was just enough to turn on the light, probably
> > not, but if it provided resistance while you were driving, then it
> > certainly could cause problems.
> >
>
> It was for about 15km in a city driving and yes, I was feeling the
> resistance when ease off the gas pedal.
>
> By the way, I took the car to Midas (as they inspect brakes for free)
> yesterday. They removed all the wheels and showed me everything, rotor,
> drums and etc. They guy said that he found no reason to change the pads
> (only 8 months old) or the drums. There were no unwanted scratches or
> ridges either on drums or wheels. Misteriously when I drove out of
> Midas there was no noise at all. BUT after a while (1 hour or so) the
> same old noise came again.

Misteriously you drove out of Midas with your wallet intact!

 

ExtremeValue wrote:
> Joe LaVigne wrote:
> > On 12 Oct 2006 08:20:43 -0700, ExtremeValue wrote:
> >
> > >>
> > >>> Thanks in advance.Pads, rotors and drums.
> > >>
> > >> If you are hearing metal scraping, just get them replaced.
> > >>
> > >> Only question I have is why you drove with the parking brake on?
> > >
> > > Hi,
> > > This was my first car and I was driving it home from the shop. I forgot
> > > the parking brake and did not see the red light on the dash probably
> > > because of excitement. Later when I came home and tried to pull the
> > > brake, I found that it was already ON. Ops!
> > >
> > > Could the brake problem be due to that? Thanks in advance.
> >
> > How far was it on? If it was just enough to turn on the light, probably
> > not, but if it provided resistance while you were driving, then it
> > certainly could cause problems.
> >
>
> It was for about 15km in a city driving and yes, I was feeling the
> resistance when ease off the gas pedal.
>
> By the way, I took the car to Midas (as they inspect brakes for free)
> yesterday. They removed all the wheels and showed me everything, rotor,
> drums and etc. They guy said that he found no reason to change the pads
> (only 8 months old) or the drums. There were no unwanted scratches or
> ridges either on drums or wheels. Misteriously when I drove out of
> Midas there was no noise at all. BUT after a while (1 hour or so) the
> same old noise came again.

Misteriously you drove out of Midas with your wallet intact!

 

ExtremeValue wrote:
> Joe LaVigne wrote:
> > On 12 Oct 2006 08:20:43 -0700, ExtremeValue wrote:
> >
> > >>
> > >>> Thanks in advance.Pads, rotors and drums.
> > >>
> > >> If you are hearing metal scraping, just get them replaced.
> > >>
> > >> Only question I have is why you drove with the parking brake on?
> > >
> > > Hi,
> > > This was my first car and I was driving it home from the shop. I forgot
> > > the parking brake and did not see the red light on the dash probably
> > > because of excitement. Later when I came home and tried to pull the
> > > brake, I found that it was already ON. Ops!
> > >
> > > Could the brake problem be due to that? Thanks in advance.
> >
> > How far was it on? If it was just enough to turn on the light, probably
> > not, but if it provided resistance while you were driving, then it
> > certainly could cause problems.
> >
>
> It was for about 15km in a city driving and yes, I was feeling the
> resistance when ease off the gas pedal.
>
> By the way, I took the car to Midas (as they inspect brakes for free)
> yesterday. They removed all the wheels and showed me everything, rotor,
> drums and etc. They guy said that he found no reason to change the pads
> (only 8 months old) or the drums. There were no unwanted scratches or
> ridges either on drums or wheels. Misteriously when I drove out of
> Midas there was no noise at all. BUT after a while (1 hour or so) the
> same old noise came again.

Misteriously you drove out of Midas with your wallet intact!