Ball Joint Stud/Castle Nut "Froze"
05-19-2006 | 05:29 PM
#76
Guest
Posts: n/a
Re: Ball Joint Stud/Castle Nut "Froze"
"loewent via CarKB.com" <u10197@uwe> wrote in news:607e2b1e61e46@uwe:
> Yes there is, I did it on my 98 civic. You have to be really careful
> when pressing the BJ in, as the control arm is made of fairly thin
> steel.
>
> I bought the BJ from NAPA. Nobody else offered it.
>
> t
>
> Jim Yanik wrote:
>>
>>According to the Haynes manual,the upper BJ is not replaceable,and the
>>entire control arm is supposed to be replaced;is there any method of
>>replacing the BJ in the original control arm?
>>
>
THANKS !!
--
Jim Yanik
jyanik
at
kua.net
> Yes there is, I did it on my 98 civic. You have to be really careful
> when pressing the BJ in, as the control arm is made of fairly thin
> steel.
>
> I bought the BJ from NAPA. Nobody else offered it.
>
> t
>
> Jim Yanik wrote:
>>
>>According to the Haynes manual,the upper BJ is not replaceable,and the
>>entire control arm is supposed to be replaced;is there any method of
>>replacing the BJ in the original control arm?
>>
>
THANKS !!
--
Jim Yanik
jyanik
at
kua.net
05-19-2006 | 05:33 PM
#77
Guest
Posts: n/a
Re: Ball Joint Stud/Castle Nut "Froze"
"loewent via CarKB.com" <u10197@uwe> wrote in news:607e2b1e61e46@uwe:
> Yes there is, I did it on my 98 civic. You have to be really careful
> when pressing the BJ in, as the control arm is made of fairly thin
> steel.
>
> I bought the BJ from NAPA. Nobody else offered it.
>
> t
>
> Jim Yanik wrote:
>>According to the Haynes manual,the upper BJ is not replaceable,and the
>>entire control arm is supposed to be replaced;is there any method of
>>replacing the BJ in the original control arm?
>>
>
I forgot to ask;did you press it in yourself? How did you do it?
Removal of the old one?
--
Jim Yanik
jyanik
at
kua.net
> Yes there is, I did it on my 98 civic. You have to be really careful
> when pressing the BJ in, as the control arm is made of fairly thin
> steel.
>
> I bought the BJ from NAPA. Nobody else offered it.
>
> t
>
> Jim Yanik wrote:
>>According to the Haynes manual,the upper BJ is not replaceable,and the
>>entire control arm is supposed to be replaced;is there any method of
>>replacing the BJ in the original control arm?
>>
>
I forgot to ask;did you press it in yourself? How did you do it?
Removal of the old one?
--
Jim Yanik
jyanik
at
kua.net
05-19-2006 | 05:33 PM
#78
Guest
Posts: n/a
Re: Ball Joint Stud/Castle Nut "Froze"
"loewent via CarKB.com" <u10197@uwe> wrote in news:607e2b1e61e46@uwe:
> Yes there is, I did it on my 98 civic. You have to be really careful
> when pressing the BJ in, as the control arm is made of fairly thin
> steel.
>
> I bought the BJ from NAPA. Nobody else offered it.
>
> t
>
> Jim Yanik wrote:
>>According to the Haynes manual,the upper BJ is not replaceable,and the
>>entire control arm is supposed to be replaced;is there any method of
>>replacing the BJ in the original control arm?
>>
>
I forgot to ask;did you press it in yourself? How did you do it?
Removal of the old one?
--
Jim Yanik
jyanik
at
kua.net
> Yes there is, I did it on my 98 civic. You have to be really careful
> when pressing the BJ in, as the control arm is made of fairly thin
> steel.
>
> I bought the BJ from NAPA. Nobody else offered it.
>
> t
>
> Jim Yanik wrote:
>>According to the Haynes manual,the upper BJ is not replaceable,and the
>>entire control arm is supposed to be replaced;is there any method of
>>replacing the BJ in the original control arm?
>>
>
I forgot to ask;did you press it in yourself? How did you do it?
Removal of the old one?
--
Jim Yanik
jyanik
at
kua.net
05-19-2006 | 05:33 PM
#79
Guest
Posts: n/a
Re: Ball Joint Stud/Castle Nut "Froze"
"loewent via CarKB.com" <u10197@uwe> wrote in news:607e2b1e61e46@uwe:
> Yes there is, I did it on my 98 civic. You have to be really careful
> when pressing the BJ in, as the control arm is made of fairly thin
> steel.
>
> I bought the BJ from NAPA. Nobody else offered it.
>
> t
>
> Jim Yanik wrote:
>>According to the Haynes manual,the upper BJ is not replaceable,and the
>>entire control arm is supposed to be replaced;is there any method of
>>replacing the BJ in the original control arm?
>>
>
I forgot to ask;did you press it in yourself? How did you do it?
Removal of the old one?
--
Jim Yanik
jyanik
at
kua.net
> Yes there is, I did it on my 98 civic. You have to be really careful
> when pressing the BJ in, as the control arm is made of fairly thin
> steel.
>
> I bought the BJ from NAPA. Nobody else offered it.
>
> t
>
> Jim Yanik wrote:
>>According to the Haynes manual,the upper BJ is not replaceable,and the
>>entire control arm is supposed to be replaced;is there any method of
>>replacing the BJ in the original control arm?
>>
>
I forgot to ask;did you press it in yourself? How did you do it?
Removal of the old one?
--
Jim Yanik
jyanik
at
kua.net
Thread
Thread Starter
Forum
Replies
Last Post
Ben Bowes
Honda Mailing List
8
12-09-2003 08:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)