I've tried the Midas touch and was extremely disappointed.

I'm looking for a more heavy duty rotor and pad system for a 99 accord exv6.

Any suggestions?

 

RanMan wrote:
> I've tried the Midas touch and was extremely disappointed.
>
> I'm looking for a more heavy duty rotor and pad system for a 99 accord exv6.

what problem are you experiencing that makes you want "more heavy duty"?

>
> Any suggestions?
>
>

 

RanMan wrote:
> I've tried the Midas touch and was extremely disappointed.
>
> I'm looking for a more heavy duty rotor and pad system for a 99 accord exv6.

what problem are you experiencing that makes you want "more heavy duty"?

>
> Any suggestions?
>
>

 

the rear rotors are too thin (not vented like the front) and warp easily.

"jim beam" <nospam@example.net> wrote in message
news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews...
> RanMan wrote:
>> I've tried the Midas touch and was extremely disappointed.
>>
>> I'm looking for a more heavy duty rotor and pad system for a 99 accord
>> exv6.
>
> what problem are you experiencing that makes you want "more heavy duty"?
>
>>
>> Any suggestions?
>

 

the rear rotors are too thin (not vented like the front) and warp easily.

"jim beam" <nospam@example.net> wrote in message
news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews...
> RanMan wrote:
>> I've tried the Midas touch and was extremely disappointed.
>>
>> I'm looking for a more heavy duty rotor and pad system for a 99 accord
>> exv6.
>
> what problem are you experiencing that makes you want "more heavy duty"?
>
>>
>> Any suggestions?
>

 

They warp easily only when your wheels are improperly torqued or when you
mix different manufacturer pads and rotors (cheap stuff) that will cause
excessive heat due to unmatched coefficient of friction.
"RanMan" <rw@twcny.rr.com> wrote in message
news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com...
> the rear rotors are too thin (not vented like the front) and warp easily.
>
> "jim beam" <nospam@example.net> wrote in message
> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews...
>> RanMan wrote:
>>> I've tried the Midas touch and was extremely disappointed.
>>>
>>> I'm looking for a more heavy duty rotor and pad system for a 99 accord
>>> exv6.
>>
>> what problem are you experiencing that makes you want "more heavy duty"?
>>
>>>
>>> Any suggestions?
>>
>
>

 

They warp easily only when your wheels are improperly torqued or when you
mix different manufacturer pads and rotors (cheap stuff) that will cause
excessive heat due to unmatched coefficient of friction.
"RanMan" <rw@twcny.rr.com> wrote in message
news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com...
> the rear rotors are too thin (not vented like the front) and warp easily.
>
> "jim beam" <nospam@example.net> wrote in message
> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews...
>> RanMan wrote:
>>> I've tried the Midas touch and was extremely disappointed.
>>>
>>> I'm looking for a more heavy duty rotor and pad system for a 99 accord
>>> exv6.
>>
>> what problem are you experiencing that makes you want "more heavy duty"?
>>
>>>
>>> Any suggestions?
>>
>
>

 

"RanMan" <rw@twcny.rr.com> wrote in
news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com:

>
> "jim beam" <nospam@example.net> wrote in message
> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews...
>> RanMan wrote:
>>> I've tried the Midas touch and was extremely disappointed.
>>>
>>> I'm looking for a more heavy duty rotor and pad system for a 99 accord
>>> exv6.
>>
>> what problem are you experiencing that makes you want "more heavy duty"?
>>
>
> the rear rotors are too thin (not vented like the front) and warp easily.



The rear brakes don't DO nothin'. Except rust. And seize.

I suspect your warpage problem is just poor maintenance.


--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

 

"RanMan" <rw@twcny.rr.com> wrote in
news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com:

>
> "jim beam" <nospam@example.net> wrote in message
> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews...
>> RanMan wrote:
>>> I've tried the Midas touch and was extremely disappointed.
>>>
>>> I'm looking for a more heavy duty rotor and pad system for a 99 accord
>>> exv6.
>>
>> what problem are you experiencing that makes you want "more heavy duty"?
>>
>
> the rear rotors are too thin (not vented like the front) and warp easily.



The rear brakes don't DO nothin'. Except rust. And seize.

I suspect your warpage problem is just poor maintenance.


--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

 

"TeGGer®" <tegger@istop.c0m> wrote in
news:Xns95F8C625E5DFEteggeratistop@207.14.113.17:

> "RanMan" <rw@twcny.rr.com> wrote in
> news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com:
>
>>
>> "jim beam" <nospam@example.net> wrote in message
>> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews...
>>> RanMan wrote:
>>>> I've tried the Midas touch and was extremely disappointed.
>>>>
>>>> I'm looking for a more heavy duty rotor and pad system for a 99
>>>> accord exv6.
>>>
>>> what problem are you experiencing that makes you want "more heavy
>>> duty"?
>>>
>>
>> the rear rotors are too thin (not vented like the front) and warp
>> easily.
>
>
>
> The rear brakes don't DO nothin'. Except rust. And seize.
>
> I suspect your warpage problem is just poor maintenance.
>
>

You would be surprised at how much the rear brakes DO do.
I had a 63 Triumph Herald lose it's brakes due to failure of a rear brake
cylinder seal,and blocked off the rear half of the system(before cross-
connected systems) to get home. It makes a big difference.

--
Jim Yanik
jyanik
at
kua.net

 

"TeGGer®" <tegger@istop.c0m> wrote in
news:Xns95F8C625E5DFEteggeratistop@207.14.113.17:

> "RanMan" <rw@twcny.rr.com> wrote in
> news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com:
>
>>
>> "jim beam" <nospam@example.net> wrote in message
>> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews...
>>> RanMan wrote:
>>>> I've tried the Midas touch and was extremely disappointed.
>>>>
>>>> I'm looking for a more heavy duty rotor and pad system for a 99
>>>> accord exv6.
>>>
>>> what problem are you experiencing that makes you want "more heavy
>>> duty"?
>>>
>>
>> the rear rotors are too thin (not vented like the front) and warp
>> easily.
>
>
>
> The rear brakes don't DO nothin'. Except rust. And seize.
>
> I suspect your warpage problem is just poor maintenance.
>
>

You would be surprised at how much the rear brakes DO do.
I had a 63 Triumph Herald lose it's brakes due to failure of a rear brake
cylinder seal,and blocked off the rear half of the system(before cross-
connected systems) to get home. It makes a big difference.

--
Jim Yanik
jyanik
at
kua.net

 

What do you mean by "poor maintenance"?

I tried to get Midas to replace the pads in Nov. '04, they said they didn't
need replacing, unfortunately I took their word for it and didn't insist.

Then in January '05 I took it back and they now say the left rear rotor is
warped.

By the way, it's the wife's car, low mileage and I keep it cleaned and well
maintained.

"TeGGer®" <tegger@istop.c0m> wrote in message
news:Xns95F8C625E5DFEteggeratistop@207.14.113.17.. .
> "RanMan" <rw@twcny.rr.com> wrote in
> news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com:
>
>>
>> "jim beam" <nospam@example.net> wrote in message
>> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews...
>>> RanMan wrote:
>>>> I've tried the Midas touch and was extremely disappointed.
>>>>
>>>> I'm looking for a more heavy duty rotor and pad system for a 99 accord
>>>> exv6.
>>>
>>> what problem are you experiencing that makes you want "more heavy duty"?
>>>
>>
>> the rear rotors are too thin (not vented like the front) and warp easily.
>
>
>
> The rear brakes don't DO nothin'. Except rust. And seize.
>
> I suspect your warpage problem is just poor maintenance.
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/

 

What do you mean by "poor maintenance"?

I tried to get Midas to replace the pads in Nov. '04, they said they didn't
need replacing, unfortunately I took their word for it and didn't insist.

Then in January '05 I took it back and they now say the left rear rotor is
warped.

By the way, it's the wife's car, low mileage and I keep it cleaned and well
maintained.

"TeGGer®" <tegger@istop.c0m> wrote in message
news:Xns95F8C625E5DFEteggeratistop@207.14.113.17.. .
> "RanMan" <rw@twcny.rr.com> wrote in
> news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com:
>
>>
>> "jim beam" <nospam@example.net> wrote in message
>> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews...
>>> RanMan wrote:
>>>> I've tried the Midas touch and was extremely disappointed.
>>>>
>>>> I'm looking for a more heavy duty rotor and pad system for a 99 accord
>>>> exv6.
>>>
>>> what problem are you experiencing that makes you want "more heavy duty"?
>>>
>>
>> the rear rotors are too thin (not vented like the front) and warp easily.
>
>
>
> The rear brakes don't DO nothin'. Except rust. And seize.
>
> I suspect your warpage problem is just poor maintenance.
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/

 

Don't put too much effort in trying to explain your mainenance habits on the
car. That guy doesn't know what he is talking about. Brakes warp for a
number of reasons and I have had a few brand new cars warp rotors after a
few thousand miles. It has nothing to do with maintenance the majority of
the time. The rear brakes obviously help the car stop. The only
maintenance you can do is adjust the rear drums, if it has drums, and do
periodic brake inspections to verify that one caliper isn't sticking and the
brakes are wearing evenly. Other than that you are at the mercy of the
crappy, base line brake systems put on most cars today. Warpage can be
created by unevenly torquing/overtorquing the wheels when put back on or
riding your brakes but that is really about it.

I can tell you from personal experience to stay away from cross drilled
rotors. They crack. The slotted rotors may be your best bet with a good
pair of ceramic pads. Also stay away from braided metal brake hoses.
Absolute crap.




"RanMan" <rw@twcny.rr.com> wrote in message
news:unzOd.29334$8H2.14735@twister.nyroc.rr.com...
> What do you mean by "poor maintenance"?
>
> I tried to get Midas to replace the pads in Nov. '04, they said they
> didn't need replacing, unfortunately I took their word for it and didn't
> insist.
>
> Then in January '05 I took it back and they now say the left rear rotor is
> warped.
>
> By the way, it's the wife's car, low mileage and I keep it cleaned and
> well maintained.
>
> "TeGGer®" <tegger@istop.c0m> wrote in message
> news:Xns95F8C625E5DFEteggeratistop@207.14.113.17.. .
>> "RanMan" <rw@twcny.rr.com> wrote in
>> news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com:
>>
>>>
>>> "jim beam" <nospam@example.net> wrote in message
>>> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews...
>>>> RanMan wrote:
>>>>> I've tried the Midas touch and was extremely disappointed.
>>>>>
>>>>> I'm looking for a more heavy duty rotor and pad system for a 99 accord
>>>>> exv6.
>>>>
>>>> what problem are you experiencing that makes you want "more heavy
>>>> duty"?
>>>>
>>>
>>> the rear rotors are too thin (not vented like the front) and warp
>>> easily.
>>
>>
>>
>> The rear brakes don't DO nothin'. Except rust. And seize.
>>
>> I suspect your warpage problem is just poor maintenance.
>>
>>
>> --
>> TeGGeR®
>>
>> The Unofficial Honda/Acura FAQ
>> www.tegger.com/hondafaq/
>
>

 

Don't put too much effort in trying to explain your mainenance habits on the
car. That guy doesn't know what he is talking about. Brakes warp for a
number of reasons and I have had a few brand new cars warp rotors after a
few thousand miles. It has nothing to do with maintenance the majority of
the time. The rear brakes obviously help the car stop. The only
maintenance you can do is adjust the rear drums, if it has drums, and do
periodic brake inspections to verify that one caliper isn't sticking and the
brakes are wearing evenly. Other than that you are at the mercy of the
crappy, base line brake systems put on most cars today. Warpage can be
created by unevenly torquing/overtorquing the wheels when put back on or
riding your brakes but that is really about it.

I can tell you from personal experience to stay away from cross drilled
rotors. They crack. The slotted rotors may be your best bet with a good
pair of ceramic pads. Also stay away from braided metal brake hoses.
Absolute crap.




"RanMan" <rw@twcny.rr.com> wrote in message
news:unzOd.29334$8H2.14735@twister.nyroc.rr.com...
> What do you mean by "poor maintenance"?
>
> I tried to get Midas to replace the pads in Nov. '04, they said they
> didn't need replacing, unfortunately I took their word for it and didn't
> insist.
>
> Then in January '05 I took it back and they now say the left rear rotor is
> warped.
>
> By the way, it's the wife's car, low mileage and I keep it cleaned and
> well maintained.
>
> "TeGGer®" <tegger@istop.c0m> wrote in message
> news:Xns95F8C625E5DFEteggeratistop@207.14.113.17.. .
>> "RanMan" <rw@twcny.rr.com> wrote in
>> news:ngwOd.2478$Eq6.2233@twister.nyroc.rr.com:
>>
>>>
>>> "jim beam" <nospam@example.net> wrote in message
>>> news:1107958177.b0c03441f3d5128e91d95c1315eca0d1@t eranews...
>>>> RanMan wrote:
>>>>> I've tried the Midas touch and was extremely disappointed.
>>>>>
>>>>> I'm looking for a more heavy duty rotor and pad system for a 99 accord
>>>>> exv6.
>>>>
>>>> what problem are you experiencing that makes you want "more heavy
>>>> duty"?
>>>>
>>>
>>> the rear rotors are too thin (not vented like the front) and warp
>>> easily.
>>
>>
>>
>> The rear brakes don't DO nothin'. Except rust. And seize.
>>
>> I suspect your warpage problem is just poor maintenance.
>>
>>
>> --
>> TeGGeR®
>>
>> The Unofficial Honda/Acura FAQ
>> www.tegger.com/hondafaq/
>
>