I got a what looked to be a rebuilt compressor from a salvage,
installed it and turned on the ac, looking at it the clutch is not
engageing, I knew that my clutch still worked on my ond one so I
connected my old one again and it does not come on. I did forget to
disconnect the battery so I checked all the fuses and I don’t see any
of them blown. The ac light still comes on. Where to go from here I
don’t know. I am wondering if I could check the clutch hooking it up
to the battery and turning the pully to see if it catches or not.

--
Posted using the http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.autoforumz.com/Honda-AC-c...ict128440.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.autoforumz.com/eform.php?p=626386

 

The clutch should engage if you have freon in the system. Otherwise, it
will not engage to keep you from burning up the compressor.

 

The clutch should engage if you have freon in the system. Otherwise, it
will not engage to keep you from burning up the compressor.