I have had a couple previous posts regarding my sister's 99 civic. The
dealership put the car back together after a catastrophic failure of the
timing belt. There is valve damage which is audible at idle.

Funny thing is though, when the car is initially started and the engine is
cold, the damage doesn't seem that bad, and the engine fires on all cylinders.


After it warms up, it starts running shittily and the check engine light
starts flashing.

Can anyone explain why this might be happening?

Thanks
t

--
Message posted via http://www.carkb.com

 

"T L via CarKB.com" <u10197@uwe> wrote in message news:58fb93a8e74bc@uwe...
> The dealership put the car back together after a catastrophic failure of
> the
> timing belt.

> After it warms up, it starts running shittily and the check engine light
> starts flashing.

Why not take it back to the dealer? If they did not fix it properly, or the
tappets are too tight, they should fix it at no charge.

Stewart DIBBS

 

Sorry, I didn't include links to the previous articles, look up '99 civic
timing belt snappage' on google and you will find them.

The dealership reassembled the timing assembly with the understanding that
there was potential valve damage. There was a chance that there was none,
but it ended up that cylinder 3 had no compression, meaning either exhaust or
intake valve damage.

That little experiment cost $650 CAD (had to replace the CKF Sensor as well
$185 CAD later.... grrrrr)

My question is: Now that we have determined there is damage of some kind,
what would cause the car to run fine when the engine is cold, but start to
run poorly after its warmed up?

I have done a compression test on cylinder 3, and there is no compression at
all.

t

Stewart DIBBS wrote:
>> The dealership put the car back together after a catastrophic failure of
>> the
>> timing belt.
>
>> After it warms up, it starts running shittily and the check engine light
>> starts flashing.
>
>Why not take it back to the dealer? If they did not fix it properly, or the
>tappets are too tight, they should fix it at no charge.
>
>Stewart DIBBS

--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200512/1

 

here are the links to the threads:

http://www.carkb.com/Uwe/Forum.aspx/...ge-on-99-civic


http://www.carkb.com/Uwe/Forum.aspx/...ivic-CONTINUED


Any input would be appreciated!

Thanks
t


T L wrote:
>Sorry, I didn't include links to the previous articles, look up '99 civic
>timing belt snappage' on google and you will find them.
>
>The dealership reassembled the timing assembly with the understanding that
>there was potential valve damage. There was a chance that there was none,
>but it ended up that cylinder 3 had no compression, meaning either exhaust or
>intake valve damage.
>
>That little experiment cost $650 CAD (had to replace the CKF Sensor as well
>$185 CAD later.... grrrrr)
>
>My question is: Now that we have determined there is damage of some kind,
>what would cause the car to run fine when the engine is cold, but start to
>run poorly after its warmed up?
>
>I have done a compression test on cylinder 3, and there is no compression at
>all.
>
>t
>
>>> The dealership put the car back together after a catastrophic failure of
>>> the
>[quoted text clipped - 7 lines]
>>
>>Stewart DIBBS

--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200512/1