Any Honda mechanics hang out here?

Anyway.... I have a 1999 Honda Accord EX... with
the manual heater / AC controls. My switch to control
the fan speed only works on one speed and I can feel
that the switch has "slack" in it so its my assumption
that the heater control unit needs to be replaced?

I believe Honda calls this item the heater control unit...
while other manufactures may call it the A/C control head.

Is it basically a direct swap out to change one of these, it
anyone knows.

I'm talking about the control unit in the dash that operates
the heater / ac fan speed and the temp.

Thanks, Elbert
-----------
Elbert
ask@me.com

 

It sounds like the keyed socket on the inside of the plastic round
control has broken. Have you pulled the black round plastic control
*** off to see?

Mine broke a couple of years ago and I did a crude repair job on it
with a little plastic cement. The controls for the fan and temperature
settings are the same and I switched them as the temperature setting
control places less torque on the keyed socket. I haven't have a
problem with either since making the repair and switch.

Elbert wrote:
> Any Honda mechanics hang out here?
>
> Anyway.... I have a 1999 Honda Accord EX... with
> the manual heater / AC controls. My switch to control
> the fan speed only works on one speed and I can feel
> that the switch has "slack" in it so its my assumption
> that the heater control unit needs to be replaced?
>
> I believe Honda calls this item the heater control unit...
> while other manufactures may call it the A/C control head.
>
> Is it basically a direct swap out to change one of these, it
> anyone knows.
>
> I'm talking about the control unit in the dash that operates
> the heater / ac fan speed and the temp.
>
> Thanks, Elbert
> -----------
> Elbert
> ask@me.com

 

It sounds like the keyed socket on the inside of the plastic round
control has broken. Have you pulled the black round plastic control
*** off to see?

Mine broke a couple of years ago and I did a crude repair job on it
with a little plastic cement. The controls for the fan and temperature
settings are the same and I switched them as the temperature setting
control places less torque on the keyed socket. I haven't have a
problem with either since making the repair and switch.

Elbert wrote:
> Any Honda mechanics hang out here?
>
> Anyway.... I have a 1999 Honda Accord EX... with
> the manual heater / AC controls. My switch to control
> the fan speed only works on one speed and I can feel
> that the switch has "slack" in it so its my assumption
> that the heater control unit needs to be replaced?
>
> I believe Honda calls this item the heater control unit...
> while other manufactures may call it the A/C control head.
>
> Is it basically a direct swap out to change one of these, it
> anyone knows.
>
> I'm talking about the control unit in the dash that operates
> the heater / ac fan speed and the temp.
>
> Thanks, Elbert
> -----------
> Elbert
> ask@me.com

 

It sounds like the keyed socket on the inside of the plastic round
control has broken. Have you pulled the black round plastic control
*** off to see?

Mine broke a couple of years ago and I did a crude repair job on it
with a little plastic cement. The controls for the fan and temperature
settings are the same and I switched them as the temperature setting
control places less torque on the keyed socket. I haven't have a
problem with either since making the repair and switch.

Elbert wrote:
> Any Honda mechanics hang out here?
>
> Anyway.... I have a 1999 Honda Accord EX... with
> the manual heater / AC controls. My switch to control
> the fan speed only works on one speed and I can feel
> that the switch has "slack" in it so its my assumption
> that the heater control unit needs to be replaced?
>
> I believe Honda calls this item the heater control unit...
> while other manufactures may call it the A/C control head.
>
> Is it basically a direct swap out to change one of these, it
> anyone knows.
>
> I'm talking about the control unit in the dash that operates
> the heater / ac fan speed and the temp.
>
> Thanks, Elbert
> -----------
> Elbert
> ask@me.com

 

It sounds like the keyed socket on the inside of the plastic round
control has broken. Have you pulled the black round plastic control
*** off to see?

Mine broke a couple of years ago and I did a crude repair job on it
with a little plastic cement. The controls for the fan and temperature
settings are the same and I switched them as the temperature setting
control places less torque on the keyed socket. I haven't have a
problem with either since making the repair and switch.

Elbert wrote:
> Any Honda mechanics hang out here?
>
> Anyway.... I have a 1999 Honda Accord EX... with
> the manual heater / AC controls. My switch to control
> the fan speed only works on one speed and I can feel
> that the switch has "slack" in it so its my assumption
> that the heater control unit needs to be replaced?
>
> I believe Honda calls this item the heater control unit...
> while other manufactures may call it the A/C control head.
>
> Is it basically a direct swap out to change one of these, it
> anyone knows.
>
> I'm talking about the control unit in the dash that operates
> the heater / ac fan speed and the temp.
>
> Thanks, Elbert
> -----------
> Elbert
> ask@me.com

 

that's a good idea... I'll check the backside of the **** to see.


On 27 Dec 2006 04:59:02 -0800, "LakeGator" <LakeGator@gmail.com>
wrote:

>It sounds like the keyed socket on the inside of the plastic round
>control has broken. Have you pulled the black round plastic control
>*** off to see?
>
>Mine broke a couple of years ago and I did a crude repair job on it
>with a little plastic cement. The controls for the fan and temperature
>settings are the same and I switched them as the temperature setting
>control places less torque on the keyed socket. I haven't have a
>problem with either since making the repair and switch.
>
>Elbert wrote:
>> Any Honda mechanics hang out here?
>>
>> Anyway.... I have a 1999 Honda Accord EX... with
>> the manual heater / AC controls. My switch to control
>> the fan speed only works on one speed and I can feel
>> that the switch has "slack" in it so its my assumption
>> that the heater control unit needs to be replaced?
>>
>> I believe Honda calls this item the heater control unit...
>> while other manufactures may call it the A/C control head.
>>
>> Is it basically a direct swap out to change one of these, it
>> anyone knows.
>>
>> I'm talking about the control unit in the dash that operates
>> the heater / ac fan speed and the temp.
>>
>> Thanks, Elbert
>> -----------
>> Elbert
>> ask@me.com
-----------
Elbert
ask@me.com

 

that's a good idea... I'll check the backside of the **** to see.


On 27 Dec 2006 04:59:02 -0800, "LakeGator" <LakeGator@gmail.com>
wrote:

>It sounds like the keyed socket on the inside of the plastic round
>control has broken. Have you pulled the black round plastic control
>*** off to see?
>
>Mine broke a couple of years ago and I did a crude repair job on it
>with a little plastic cement. The controls for the fan and temperature
>settings are the same and I switched them as the temperature setting
>control places less torque on the keyed socket. I haven't have a
>problem with either since making the repair and switch.
>
>Elbert wrote:
>> Any Honda mechanics hang out here?
>>
>> Anyway.... I have a 1999 Honda Accord EX... with
>> the manual heater / AC controls. My switch to control
>> the fan speed only works on one speed and I can feel
>> that the switch has "slack" in it so its my assumption
>> that the heater control unit needs to be replaced?
>>
>> I believe Honda calls this item the heater control unit...
>> while other manufactures may call it the A/C control head.
>>
>> Is it basically a direct swap out to change one of these, it
>> anyone knows.
>>
>> I'm talking about the control unit in the dash that operates
>> the heater / ac fan speed and the temp.
>>
>> Thanks, Elbert
>> -----------
>> Elbert
>> ask@me.com
-----------
Elbert
ask@me.com

 

that's a good idea... I'll check the backside of the **** to see.


On 27 Dec 2006 04:59:02 -0800, "LakeGator" <LakeGator@gmail.com>
wrote:

>It sounds like the keyed socket on the inside of the plastic round
>control has broken. Have you pulled the black round plastic control
>*** off to see?
>
>Mine broke a couple of years ago and I did a crude repair job on it
>with a little plastic cement. The controls for the fan and temperature
>settings are the same and I switched them as the temperature setting
>control places less torque on the keyed socket. I haven't have a
>problem with either since making the repair and switch.
>
>Elbert wrote:
>> Any Honda mechanics hang out here?
>>
>> Anyway.... I have a 1999 Honda Accord EX... with
>> the manual heater / AC controls. My switch to control
>> the fan speed only works on one speed and I can feel
>> that the switch has "slack" in it so its my assumption
>> that the heater control unit needs to be replaced?
>>
>> I believe Honda calls this item the heater control unit...
>> while other manufactures may call it the A/C control head.
>>
>> Is it basically a direct swap out to change one of these, it
>> anyone knows.
>>
>> I'm talking about the control unit in the dash that operates
>> the heater / ac fan speed and the temp.
>>
>> Thanks, Elbert
>> -----------
>> Elbert
>> ask@me.com
-----------
Elbert
ask@me.com

 

that's a good idea... I'll check the backside of the **** to see.


On 27 Dec 2006 04:59:02 -0800, "LakeGator" <LakeGator@gmail.com>
wrote:

>It sounds like the keyed socket on the inside of the plastic round
>control has broken. Have you pulled the black round plastic control
>*** off to see?
>
>Mine broke a couple of years ago and I did a crude repair job on it
>with a little plastic cement. The controls for the fan and temperature
>settings are the same and I switched them as the temperature setting
>control places less torque on the keyed socket. I haven't have a
>problem with either since making the repair and switch.
>
>Elbert wrote:
>> Any Honda mechanics hang out here?
>>
>> Anyway.... I have a 1999 Honda Accord EX... with
>> the manual heater / AC controls. My switch to control
>> the fan speed only works on one speed and I can feel
>> that the switch has "slack" in it so its my assumption
>> that the heater control unit needs to be replaced?
>>
>> I believe Honda calls this item the heater control unit...
>> while other manufactures may call it the A/C control head.
>>
>> Is it basically a direct swap out to change one of these, it
>> anyone knows.
>>
>> I'm talking about the control unit in the dash that operates
>> the heater / ac fan speed and the temp.
>>
>> Thanks, Elbert
>> -----------
>> Elbert
>> ask@me.com
-----------
Elbert
ask@me.com

 

as a quick follow-on... the **** for the fan speed is not broken.


On Wed, 27 Dec 2006 08:00:17 -0600, Elbert <ask@me.com> wrote:

>
>that's a good idea... I'll check the backside of the **** to see.
>
>
>On 27 Dec 2006 04:59:02 -0800, "LakeGator" <LakeGator@gmail.com>
>wrote:
>
>>It sounds like the keyed socket on the inside of the plastic round
>>control has broken. Have you pulled the black round plastic control
>>*** off to see?
>>
>>Mine broke a couple of years ago and I did a crude repair job on it
>>with a little plastic cement. The controls for the fan and temperature
>>settings are the same and I switched them as the temperature setting
>>control places less torque on the keyed socket. I haven't have a
>>problem with either since making the repair and switch.
>>
>>Elbert wrote:
>>> Any Honda mechanics hang out here?
>>>
>>> Anyway.... I have a 1999 Honda Accord EX... with
>>> the manual heater / AC controls. My switch to control
>>> the fan speed only works on one speed and I can feel
>>> that the switch has "slack" in it so its my assumption
>>> that the heater control unit needs to be replaced?
>>>
>>> I believe Honda calls this item the heater control unit...
>>> while other manufactures may call it the A/C control head.
>>>
>>> Is it basically a direct swap out to change one of these, it
>>> anyone knows.
>>>
>>> I'm talking about the control unit in the dash that operates
>>> the heater / ac fan speed and the temp.
>>>
>>> Thanks, Elbert
>>> -----------
>>> Elbert
>>> ask@me.com
>-----------
>Elbert
>ask@me.com
-----------
Elbert
ask@me.com

 

as a quick follow-on... the **** for the fan speed is not broken.


On Wed, 27 Dec 2006 08:00:17 -0600, Elbert <ask@me.com> wrote:

>
>that's a good idea... I'll check the backside of the **** to see.
>
>
>On 27 Dec 2006 04:59:02 -0800, "LakeGator" <LakeGator@gmail.com>
>wrote:
>
>>It sounds like the keyed socket on the inside of the plastic round
>>control has broken. Have you pulled the black round plastic control
>>*** off to see?
>>
>>Mine broke a couple of years ago and I did a crude repair job on it
>>with a little plastic cement. The controls for the fan and temperature
>>settings are the same and I switched them as the temperature setting
>>control places less torque on the keyed socket. I haven't have a
>>problem with either since making the repair and switch.
>>
>>Elbert wrote:
>>> Any Honda mechanics hang out here?
>>>
>>> Anyway.... I have a 1999 Honda Accord EX... with
>>> the manual heater / AC controls. My switch to control
>>> the fan speed only works on one speed and I can feel
>>> that the switch has "slack" in it so its my assumption
>>> that the heater control unit needs to be replaced?
>>>
>>> I believe Honda calls this item the heater control unit...
>>> while other manufactures may call it the A/C control head.
>>>
>>> Is it basically a direct swap out to change one of these, it
>>> anyone knows.
>>>
>>> I'm talking about the control unit in the dash that operates
>>> the heater / ac fan speed and the temp.
>>>
>>> Thanks, Elbert
>>> -----------
>>> Elbert
>>> ask@me.com
>-----------
>Elbert
>ask@me.com
-----------
Elbert
ask@me.com

 

as a quick follow-on... the **** for the fan speed is not broken.


On Wed, 27 Dec 2006 08:00:17 -0600, Elbert <ask@me.com> wrote:

>
>that's a good idea... I'll check the backside of the **** to see.
>
>
>On 27 Dec 2006 04:59:02 -0800, "LakeGator" <LakeGator@gmail.com>
>wrote:
>
>>It sounds like the keyed socket on the inside of the plastic round
>>control has broken. Have you pulled the black round plastic control
>>*** off to see?
>>
>>Mine broke a couple of years ago and I did a crude repair job on it
>>with a little plastic cement. The controls for the fan and temperature
>>settings are the same and I switched them as the temperature setting
>>control places less torque on the keyed socket. I haven't have a
>>problem with either since making the repair and switch.
>>
>>Elbert wrote:
>>> Any Honda mechanics hang out here?
>>>
>>> Anyway.... I have a 1999 Honda Accord EX... with
>>> the manual heater / AC controls. My switch to control
>>> the fan speed only works on one speed and I can feel
>>> that the switch has "slack" in it so its my assumption
>>> that the heater control unit needs to be replaced?
>>>
>>> I believe Honda calls this item the heater control unit...
>>> while other manufactures may call it the A/C control head.
>>>
>>> Is it basically a direct swap out to change one of these, it
>>> anyone knows.
>>>
>>> I'm talking about the control unit in the dash that operates
>>> the heater / ac fan speed and the temp.
>>>
>>> Thanks, Elbert
>>> -----------
>>> Elbert
>>> ask@me.com
>-----------
>Elbert
>ask@me.com
-----------
Elbert
ask@me.com

 

as a quick follow-on... the **** for the fan speed is not broken.


On Wed, 27 Dec 2006 08:00:17 -0600, Elbert <ask@me.com> wrote:

>
>that's a good idea... I'll check the backside of the **** to see.
>
>
>On 27 Dec 2006 04:59:02 -0800, "LakeGator" <LakeGator@gmail.com>
>wrote:
>
>>It sounds like the keyed socket on the inside of the plastic round
>>control has broken. Have you pulled the black round plastic control
>>*** off to see?
>>
>>Mine broke a couple of years ago and I did a crude repair job on it
>>with a little plastic cement. The controls for the fan and temperature
>>settings are the same and I switched them as the temperature setting
>>control places less torque on the keyed socket. I haven't have a
>>problem with either since making the repair and switch.
>>
>>Elbert wrote:
>>> Any Honda mechanics hang out here?
>>>
>>> Anyway.... I have a 1999 Honda Accord EX... with
>>> the manual heater / AC controls. My switch to control
>>> the fan speed only works on one speed and I can feel
>>> that the switch has "slack" in it so its my assumption
>>> that the heater control unit needs to be replaced?
>>>
>>> I believe Honda calls this item the heater control unit...
>>> while other manufactures may call it the A/C control head.
>>>
>>> Is it basically a direct swap out to change one of these, it
>>> anyone knows.
>>>
>>> I'm talking about the control unit in the dash that operates
>>> the heater / ac fan speed and the temp.
>>>
>>> Thanks, Elbert
>>> -----------
>>> Elbert
>>> ask@me.com
>-----------
>Elbert
>ask@me.com
-----------
Elbert
ask@me.com

 

Which speed does work?
I think your problem may be with the blower resistor module.

 

Which speed does work?
I think your problem may be with the blower resistor module.