96 Accord will not turnover
#16
Guest
Posts: n/a
Re: 96 Accord will not turnover
"Grey-hound" <grey-hound@"removethis"verizon.net> wrote in message
news:XOxki.1718$YH3.1006@trnddc08...
>I checked the contacts and in position 3 which is the start position I was
>not getting any continuity(bad). So it looks to be a switch. According to
>the CDRom manual I have (I hate this one) it shows that changing it to be
>straight forward. Since I have never done it do I need any special tools or
>expertise to do this or will my backyard mechanic skills be enough?
> Thanks
> Greyhound
>
Look this over http://tegger.com/hondafaq/ignition_switch/index.html and
decide whether it looks like it's within your abilities. Yours may be a
little different but the work is pretty similar. One final admonition - when
putting the switch back on the lock, don't overtighten the screws. Use some
blue LokTite and gentle tightening to avoid breaking the plastic. Don't ask
me how I know :-(
Mike
news:XOxki.1718$YH3.1006@trnddc08...
>I checked the contacts and in position 3 which is the start position I was
>not getting any continuity(bad). So it looks to be a switch. According to
>the CDRom manual I have (I hate this one) it shows that changing it to be
>straight forward. Since I have never done it do I need any special tools or
>expertise to do this or will my backyard mechanic skills be enough?
> Thanks
> Greyhound
>
Look this over http://tegger.com/hondafaq/ignition_switch/index.html and
decide whether it looks like it's within your abilities. Yours may be a
little different but the work is pretty similar. One final admonition - when
putting the switch back on the lock, don't overtighten the screws. Use some
blue LokTite and gentle tightening to avoid breaking the plastic. Don't ask
me how I know :-(
Mike
#17
Guest
Posts: n/a
Re: 96 Accord will not turnover
Screw the load test, can you jump it?
G-Man
"Grey-hound" <grey-hound@"removethis"verizon.net> wrote in message
newsCcki.11845$g44.4965@trnddc02...
> Greetings,
> I have an 96 Accord 4 dr LX a/t with 156k miles. Initially would click at
> starter solenoid when trying to start but now finally refuses to turn over
> at the starter. Replaced starter, master relay, starter signal fuse (in
> fuse box) and battery load tests ok. Am pretty much at a loss any ideas.
> Thanks
> Greyhound
> Tampa, FL
G-Man
"Grey-hound" <grey-hound@"removethis"verizon.net> wrote in message
newsCcki.11845$g44.4965@trnddc02...
> Greetings,
> I have an 96 Accord 4 dr LX a/t with 156k miles. Initially would click at
> starter solenoid when trying to start but now finally refuses to turn over
> at the starter. Replaced starter, master relay, starter signal fuse (in
> fuse box) and battery load tests ok. Am pretty much at a loss any ideas.
> Thanks
> Greyhound
> Tampa, FL
#18
Guest
Posts: n/a
Re: 96 Accord will not turnover
Screw the load test, can you jump it?
G-Man
"Grey-hound" <grey-hound@"removethis"verizon.net> wrote in message
newsCcki.11845$g44.4965@trnddc02...
> Greetings,
> I have an 96 Accord 4 dr LX a/t with 156k miles. Initially would click at
> starter solenoid when trying to start but now finally refuses to turn over
> at the starter. Replaced starter, master relay, starter signal fuse (in
> fuse box) and battery load tests ok. Am pretty much at a loss any ideas.
> Thanks
> Greyhound
> Tampa, FL
G-Man
"Grey-hound" <grey-hound@"removethis"verizon.net> wrote in message
newsCcki.11845$g44.4965@trnddc02...
> Greetings,
> I have an 96 Accord 4 dr LX a/t with 156k miles. Initially would click at
> starter solenoid when trying to start but now finally refuses to turn over
> at the starter. Replaced starter, master relay, starter signal fuse (in
> fuse box) and battery load tests ok. Am pretty much at a loss any ideas.
> Thanks
> Greyhound
> Tampa, FL
#19
Guest
Posts: n/a
Re: 96 Accord will not turnover
Screw the load test, can you jump it?
G-Man
"Grey-hound" <grey-hound@"removethis"verizon.net> wrote in message
newsCcki.11845$g44.4965@trnddc02...
> Greetings,
> I have an 96 Accord 4 dr LX a/t with 156k miles. Initially would click at
> starter solenoid when trying to start but now finally refuses to turn over
> at the starter. Replaced starter, master relay, starter signal fuse (in
> fuse box) and battery load tests ok. Am pretty much at a loss any ideas.
> Thanks
> Greyhound
> Tampa, FL
G-Man
"Grey-hound" <grey-hound@"removethis"verizon.net> wrote in message
newsCcki.11845$g44.4965@trnddc02...
> Greetings,
> I have an 96 Accord 4 dr LX a/t with 156k miles. Initially would click at
> starter solenoid when trying to start but now finally refuses to turn over
> at the starter. Replaced starter, master relay, starter signal fuse (in
> fuse box) and battery load tests ok. Am pretty much at a loss any ideas.
> Thanks
> Greyhound
> Tampa, FL
Thread
Thread Starter
Forum
Replies
Last Post
abclint
Motorcycle Section
2
10-02-2007 04:15 PM
myaj7126
honda / acura
1
09-25-2007 04:48 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)