96 Accord P0141
08-17-2006 | 10:40 AM
#16
Guest
Posts: n/a
Re: 96 Accord P0141
Thank you, John, for the info, but I have 165,000 miles on the
Accord, and I must admit, enjoyable and trouble free!
I cant ask for much more!
Andy
"Andy & Carol" <aforn@worldnet.att.net> wrote in message
news:P4YEg.633581$Fs1.392849@bgtnsc05-news.ops.worldnet.att.net...
> P0141 Secondary Heated Oxygen Senser ckt malfunction..DTC
> won't reset. 4 cylinder engine. Anybody have any ideas?
>
> Is it the sensor heater itself, Is there a problem with these?
> I will get in to it on Sat.
> Andy
>
>
>
Accord, and I must admit, enjoyable and trouble free!
I cant ask for much more!
Andy
"Andy & Carol" <aforn@worldnet.att.net> wrote in message
news:P4YEg.633581$Fs1.392849@bgtnsc05-news.ops.worldnet.att.net...
> P0141 Secondary Heated Oxygen Senser ckt malfunction..DTC
> won't reset. 4 cylinder engine. Anybody have any ideas?
>
> Is it the sensor heater itself, Is there a problem with these?
> I will get in to it on Sat.
> Andy
>
>
>
08-17-2006 | 10:46 AM
#17
Guest
Posts: n/a
Re: 96 Accord P0141
Andy & Carol wrote:
>
> P0141 Secondary Heated Oxygen Senser ckt malfunction..DTC
> won't reset. 4 cylinder engine. Anybody have any ideas?
>
> Is it the sensor heater itself, Is there a problem with these?
> I will get in to it on Sat.
> Andy
>
-----------------------------
Since it's the HEATER part of the circuit, put your ohmmeter across the
two wires that are the same color. If it's OPEN, the sensor has to be
changed. If it's not open, the connections or the computer (which
supplies the current) could be at fault. Sensor probably just needs to
be replaced.
Read the 'NTK O2 Sensors Tech' part of this page to learn more about O2
sensors. http://www.ngksparkplugs.ca/
'Curly'
>
> P0141 Secondary Heated Oxygen Senser ckt malfunction..DTC
> won't reset. 4 cylinder engine. Anybody have any ideas?
>
> Is it the sensor heater itself, Is there a problem with these?
> I will get in to it on Sat.
> Andy
>
-----------------------------
Since it's the HEATER part of the circuit, put your ohmmeter across the
two wires that are the same color. If it's OPEN, the sensor has to be
changed. If it's not open, the connections or the computer (which
supplies the current) could be at fault. Sensor probably just needs to
be replaced.
Read the 'NTK O2 Sensors Tech' part of this page to learn more about O2
sensors. http://www.ngksparkplugs.ca/
'Curly'
08-17-2006 | 10:46 AM
#18
Guest
Posts: n/a
Re: 96 Accord P0141
Andy & Carol wrote:
>
> P0141 Secondary Heated Oxygen Senser ckt malfunction..DTC
> won't reset. 4 cylinder engine. Anybody have any ideas?
>
> Is it the sensor heater itself, Is there a problem with these?
> I will get in to it on Sat.
> Andy
>
-----------------------------
Since it's the HEATER part of the circuit, put your ohmmeter across the
two wires that are the same color. If it's OPEN, the sensor has to be
changed. If it's not open, the connections or the computer (which
supplies the current) could be at fault. Sensor probably just needs to
be replaced.
Read the 'NTK O2 Sensors Tech' part of this page to learn more about O2
sensors. http://www.ngksparkplugs.ca/
'Curly'
>
> P0141 Secondary Heated Oxygen Senser ckt malfunction..DTC
> won't reset. 4 cylinder engine. Anybody have any ideas?
>
> Is it the sensor heater itself, Is there a problem with these?
> I will get in to it on Sat.
> Andy
>
-----------------------------
Since it's the HEATER part of the circuit, put your ohmmeter across the
two wires that are the same color. If it's OPEN, the sensor has to be
changed. If it's not open, the connections or the computer (which
supplies the current) could be at fault. Sensor probably just needs to
be replaced.
Read the 'NTK O2 Sensors Tech' part of this page to learn more about O2
sensors. http://www.ngksparkplugs.ca/
'Curly'
08-17-2006 | 10:46 AM
#19
Guest
Posts: n/a
Re: 96 Accord P0141
Andy & Carol wrote:
>
> P0141 Secondary Heated Oxygen Senser ckt malfunction..DTC
> won't reset. 4 cylinder engine. Anybody have any ideas?
>
> Is it the sensor heater itself, Is there a problem with these?
> I will get in to it on Sat.
> Andy
>
-----------------------------
Since it's the HEATER part of the circuit, put your ohmmeter across the
two wires that are the same color. If it's OPEN, the sensor has to be
changed. If it's not open, the connections or the computer (which
supplies the current) could be at fault. Sensor probably just needs to
be replaced.
Read the 'NTK O2 Sensors Tech' part of this page to learn more about O2
sensors. http://www.ngksparkplugs.ca/
'Curly'
>
> P0141 Secondary Heated Oxygen Senser ckt malfunction..DTC
> won't reset. 4 cylinder engine. Anybody have any ideas?
>
> Is it the sensor heater itself, Is there a problem with these?
> I will get in to it on Sat.
> Andy
>
-----------------------------
Since it's the HEATER part of the circuit, put your ohmmeter across the
two wires that are the same color. If it's OPEN, the sensor has to be
changed. If it's not open, the connections or the computer (which
supplies the current) could be at fault. Sensor probably just needs to
be replaced.
Read the 'NTK O2 Sensors Tech' part of this page to learn more about O2
sensors. http://www.ngksparkplugs.ca/
'Curly'
Thread
Thread Starter
Forum
Replies
Last Post
leon_1883
Honda Civic - Del Sol - CRX
1
01-29-2008 04:56 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)