My 96 Accord has a slow leak in the hydraulic clutch system somewhere. The
Haynes manual tells me there are only 3 parts to the system, the master cyl,
slave, and the hydraulic hose (metal pipe) in between. When I look at the
car it is more complicated. The metal hydraulic line leaves the master
cylinder at the clutch pedal and goes all the way across the car into
something about the same size and shape as a hockey puck on the frame just
above the passenger side drive axle. A different metal hose comes out of
there and somewhere I can't see turns into a rubber hose. The rubber hose
runs into the top of the trans just below the shift lever, next to the
back-up switch. It then turns back into a metal hose that goes to the slave
cylinder that disengages the clutch.

Master and slave are clean and dry. The problem seems to be up at the top
of the trans, there is fluid around this. I talked to the auto parts store
and they said they only carry the master and slave. What is the hydraulic
clutch system plugged into at the top of the trans??? Can a replacement be
had? Any help is greatly appreciated.