Chuck <chuck@westmichigan.net> wrote in
news:71UYf.13746$zk4.12992@trnddc05:

> On 2006-04-04, TeGGeR® <tegger@tegger.c0m> wrote:

>
> The book says that the Dual Point doesn't have a resistor.



Which book? I though they all had resistors.


>
> Here's something weird that may help solve the problem. I pull the
> plug off the upper injector to ohm test it and the motor attempted to
> start. It at least fires some but doesn't run. One injector reads 1.5
> ohms and the other 8.6 ohms. Should I just replace the upper injector
> or try cleaning it? I'll probably just sell this thing cheap so I want
> to keep my costs down.
>
> What get me is that the thing wouldn't even attempt to start with
> starting fluid or gas manually dumped in it.
>



The upper injector is the cold-start injector, is it not?


--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

 

On 2006-04-05, TeGGeR® <tegger@tegger.c0m> wrote:
> Chuck <chuck@westmichigan.net> wrote in
> news:71UYf.13746$zk4.12992@trnddc05:
>
>> On 2006-04-04, TeGGeR® <tegger@tegger.c0m> wrote:
>
>>
>> The book says that the Dual Point doesn't have a resistor.
>
>
>
> Which book? I though they all had resistors.
>

Haynes. The illustration shows a resistor and says "multiport only". It
shows the same harness plug that I have with the resistor next to it,
but there's no resistor there on mine.

>
>>
>> Here's something weird that may help solve the problem. I pull the
>> plug off the upper injector to ohm test it and the motor attempted to
>> start. It at least fires some but doesn't run. One injector reads 1.5
>> ohms and the other 8.6 ohms. Should I just replace the upper injector
>> or try cleaning it? I'll probably just sell this thing cheap so I want
>> to keep my costs down.
>>
>> What get me is that the thing wouldn't even attempt to start with
>> starting fluid or gas manually dumped in it.
>>
>
>
>
> The upper injector is the cold-start injector, is it not?
>
>

 

On 2006-04-05, TeGGeR® <tegger@tegger.c0m> wrote:
> Chuck <chuck@westmichigan.net> wrote in
> news:71UYf.13746$zk4.12992@trnddc05:
>
>> On 2006-04-04, TeGGeR® <tegger@tegger.c0m> wrote:
>
>>
>> The book says that the Dual Point doesn't have a resistor.
>
>
>
> Which book? I though they all had resistors.
>

Haynes. The illustration shows a resistor and says "multiport only". It
shows the same harness plug that I have with the resistor next to it,
but there's no resistor there on mine.

>
>>
>> Here's something weird that may help solve the problem. I pull the
>> plug off the upper injector to ohm test it and the motor attempted to
>> start. It at least fires some but doesn't run. One injector reads 1.5
>> ohms and the other 8.6 ohms. Should I just replace the upper injector
>> or try cleaning it? I'll probably just sell this thing cheap so I want
>> to keep my costs down.
>>
>> What get me is that the thing wouldn't even attempt to start with
>> starting fluid or gas manually dumped in it.
>>
>
>
>
> The upper injector is the cold-start injector, is it not?
>
>