91 Accord 2 dr. Replaced front rotors, new pads, rebuilt calipers. Found
front left to be dragging, could feel heat from rotor. Replaced caliper with
rebuilt and put on new front left rotor (in case first one was warped.)
After change, still found to be dragging, can still feel heat from rotor.
Right side has never been a problem, runs cool. On left side, pads seems to
fit into caliper mounting bracket ok. Any ideas why the front left caliper
is not releasing, following application of brakes? New brake hardware was
provided with caliper. Is there a need to clean out the mounting holes in
the caliper mounting bracket, to insure free movement of the caliper? I'm
stumped.....any help is appreciated. Joe