91 Accord brake light indicater goes on
01-24-2007 | 01:07 PM
#16
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
dgk <dgk@somewhere.com> wrote in news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@
4ax.com:
>
> It is, naturally, the light that gets water in it when it rains hard.
> I'll have to do some work on it this weekend.
Replace the taillight gasket. It's making a poor seal and allowing water
in. You've likely got some corrosion in the affected sockets, so a bit of
work with some sandpaper would do you good.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
4ax.com:
>
> It is, naturally, the light that gets water in it when it rains hard.
> I'll have to do some work on it this weekend.
Replace the taillight gasket. It's making a poor seal and allowing water
in. You've likely got some corrosion in the affected sockets, so a bit of
work with some sandpaper would do you good.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
01-24-2007 | 01:07 PM
#17
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
dgk <dgk@somewhere.com> wrote in news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@
4ax.com:
>
> It is, naturally, the light that gets water in it when it rains hard.
> I'll have to do some work on it this weekend.
Replace the taillight gasket. It's making a poor seal and allowing water
in. You've likely got some corrosion in the affected sockets, so a bit of
work with some sandpaper would do you good.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
4ax.com:
>
> It is, naturally, the light that gets water in it when it rains hard.
> I'll have to do some work on it this weekend.
Replace the taillight gasket. It's making a poor seal and allowing water
in. You've likely got some corrosion in the affected sockets, so a bit of
work with some sandpaper would do you good.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
01-24-2007 | 03:48 PM
#18
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
On Wed, 24 Jan 2007 18:07:31 +0000 (UTC), Tegger <tegger@tegger.c0m>
wrote:
>dgk <dgk@somewhere.com> wrote in news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@
>4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
>Replace the taillight gasket. It's making a poor seal and allowing water
>in. You've likely got some corrosion in the affected sockets, so a bit of
>work with some sandpaper would do you good.
Thanks. Plus I probably have to change the bulb.I have the gasket,
I've been meaning to change it for a few months. I tried once but
couldn't get the plastic off even after removing the four bolts. And
it is not the side with the key. I'll have to try again.
wrote:
>dgk <dgk@somewhere.com> wrote in news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@
>4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
>Replace the taillight gasket. It's making a poor seal and allowing water
>in. You've likely got some corrosion in the affected sockets, so a bit of
>work with some sandpaper would do you good.
Thanks. Plus I probably have to change the bulb.I have the gasket,
I've been meaning to change it for a few months. I tried once but
couldn't get the plastic off even after removing the four bolts. And
it is not the side with the key. I'll have to try again.
01-24-2007 | 03:48 PM
#19
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
On Wed, 24 Jan 2007 18:07:31 +0000 (UTC), Tegger <tegger@tegger.c0m>
wrote:
>dgk <dgk@somewhere.com> wrote in news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@
>4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
>Replace the taillight gasket. It's making a poor seal and allowing water
>in. You've likely got some corrosion in the affected sockets, so a bit of
>work with some sandpaper would do you good.
Thanks. Plus I probably have to change the bulb.I have the gasket,
I've been meaning to change it for a few months. I tried once but
couldn't get the plastic off even after removing the four bolts. And
it is not the side with the key. I'll have to try again.
wrote:
>dgk <dgk@somewhere.com> wrote in news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@
>4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
>Replace the taillight gasket. It's making a poor seal and allowing water
>in. You've likely got some corrosion in the affected sockets, so a bit of
>work with some sandpaper would do you good.
Thanks. Plus I probably have to change the bulb.I have the gasket,
I've been meaning to change it for a few months. I tried once but
couldn't get the plastic off even after removing the four bolts. And
it is not the side with the key. I'll have to try again.
01-24-2007 | 03:48 PM
#20
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
On Wed, 24 Jan 2007 18:07:31 +0000 (UTC), Tegger <tegger@tegger.c0m>
wrote:
>dgk <dgk@somewhere.com> wrote in news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@
>4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
>Replace the taillight gasket. It's making a poor seal and allowing water
>in. You've likely got some corrosion in the affected sockets, so a bit of
>work with some sandpaper would do you good.
Thanks. Plus I probably have to change the bulb.I have the gasket,
I've been meaning to change it for a few months. I tried once but
couldn't get the plastic off even after removing the four bolts. And
it is not the side with the key. I'll have to try again.
wrote:
>dgk <dgk@somewhere.com> wrote in news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@
>4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
>Replace the taillight gasket. It's making a poor seal and allowing water
>in. You've likely got some corrosion in the affected sockets, so a bit of
>work with some sandpaper would do you good.
Thanks. Plus I probably have to change the bulb.I have the gasket,
I've been meaning to change it for a few months. I tried once but
couldn't get the plastic off even after removing the four bolts. And
it is not the side with the key. I'll have to try again.
01-24-2007 | 03:48 PM
#21
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
On Wed, 24 Jan 2007 18:07:31 +0000 (UTC), Tegger <tegger@tegger.c0m>
wrote:
>dgk <dgk@somewhere.com> wrote in news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@
>4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
>Replace the taillight gasket. It's making a poor seal and allowing water
>in. You've likely got some corrosion in the affected sockets, so a bit of
>work with some sandpaper would do you good.
Thanks. Plus I probably have to change the bulb.I have the gasket,
I've been meaning to change it for a few months. I tried once but
couldn't get the plastic off even after removing the four bolts. And
it is not the side with the key. I'll have to try again.
wrote:
>dgk <dgk@somewhere.com> wrote in news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@
>4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
>Replace the taillight gasket. It's making a poor seal and allowing water
>in. You've likely got some corrosion in the affected sockets, so a bit of
>work with some sandpaper would do you good.
Thanks. Plus I probably have to change the bulb.I have the gasket,
I've been meaning to change it for a few months. I tried once but
couldn't get the plastic off even after removing the four bolts. And
it is not the side with the key. I'll have to try again.
01-24-2007 | 08:20 PM
#22
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
dgk <dgk@somewhere.com> wrote in
news:hehfr2tm65bprsnjlcu4ab5alduid1vlcn@4ax.com:
> On Wed, 24 Jan 2007 18:07:31 +0000 (UTC), Tegger <tegger@tegger.c0m>
> wrote:
>
>>dgk <dgk@somewhere.com> wrote in
>>news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>>
>>
>>>
>>> It is, naturally, the light that gets water in it when it rains
>>> hard. I'll have to do some work on it this weekend.
>>
>>
>>
>>Replace the taillight gasket. It's making a poor seal and allowing
>>water in. You've likely got some corrosion in the affected sockets, so
>>a bit of work with some sandpaper would do you good.
>
> Thanks. Plus I probably have to change the bulb.I have the gasket,
> I've been meaning to change it for a few months. I tried once but
> couldn't get the plastic off even after removing the four bolts. And
> it is not the side with the key. I'll have to try again.
There are SIX nuts, not four! Look more carefully!
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:hehfr2tm65bprsnjlcu4ab5alduid1vlcn@4ax.com:
> On Wed, 24 Jan 2007 18:07:31 +0000 (UTC), Tegger <tegger@tegger.c0m>
> wrote:
>
>>dgk <dgk@somewhere.com> wrote in
>>news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>>
>>
>>>
>>> It is, naturally, the light that gets water in it when it rains
>>> hard. I'll have to do some work on it this weekend.
>>
>>
>>
>>Replace the taillight gasket. It's making a poor seal and allowing
>>water in. You've likely got some corrosion in the affected sockets, so
>>a bit of work with some sandpaper would do you good.
>
> Thanks. Plus I probably have to change the bulb.I have the gasket,
> I've been meaning to change it for a few months. I tried once but
> couldn't get the plastic off even after removing the four bolts. And
> it is not the side with the key. I'll have to try again.
There are SIX nuts, not four! Look more carefully!
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
01-24-2007 | 08:20 PM
#23
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
dgk <dgk@somewhere.com> wrote in
news:hehfr2tm65bprsnjlcu4ab5alduid1vlcn@4ax.com:
> On Wed, 24 Jan 2007 18:07:31 +0000 (UTC), Tegger <tegger@tegger.c0m>
> wrote:
>
>>dgk <dgk@somewhere.com> wrote in
>>news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>>
>>
>>>
>>> It is, naturally, the light that gets water in it when it rains
>>> hard. I'll have to do some work on it this weekend.
>>
>>
>>
>>Replace the taillight gasket. It's making a poor seal and allowing
>>water in. You've likely got some corrosion in the affected sockets, so
>>a bit of work with some sandpaper would do you good.
>
> Thanks. Plus I probably have to change the bulb.I have the gasket,
> I've been meaning to change it for a few months. I tried once but
> couldn't get the plastic off even after removing the four bolts. And
> it is not the side with the key. I'll have to try again.
There are SIX nuts, not four! Look more carefully!
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:hehfr2tm65bprsnjlcu4ab5alduid1vlcn@4ax.com:
> On Wed, 24 Jan 2007 18:07:31 +0000 (UTC), Tegger <tegger@tegger.c0m>
> wrote:
>
>>dgk <dgk@somewhere.com> wrote in
>>news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>>
>>
>>>
>>> It is, naturally, the light that gets water in it when it rains
>>> hard. I'll have to do some work on it this weekend.
>>
>>
>>
>>Replace the taillight gasket. It's making a poor seal and allowing
>>water in. You've likely got some corrosion in the affected sockets, so
>>a bit of work with some sandpaper would do you good.
>
> Thanks. Plus I probably have to change the bulb.I have the gasket,
> I've been meaning to change it for a few months. I tried once but
> couldn't get the plastic off even after removing the four bolts. And
> it is not the side with the key. I'll have to try again.
There are SIX nuts, not four! Look more carefully!
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
01-24-2007 | 08:20 PM
#24
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
dgk <dgk@somewhere.com> wrote in
news:hehfr2tm65bprsnjlcu4ab5alduid1vlcn@4ax.com:
> On Wed, 24 Jan 2007 18:07:31 +0000 (UTC), Tegger <tegger@tegger.c0m>
> wrote:
>
>>dgk <dgk@somewhere.com> wrote in
>>news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>>
>>
>>>
>>> It is, naturally, the light that gets water in it when it rains
>>> hard. I'll have to do some work on it this weekend.
>>
>>
>>
>>Replace the taillight gasket. It's making a poor seal and allowing
>>water in. You've likely got some corrosion in the affected sockets, so
>>a bit of work with some sandpaper would do you good.
>
> Thanks. Plus I probably have to change the bulb.I have the gasket,
> I've been meaning to change it for a few months. I tried once but
> couldn't get the plastic off even after removing the four bolts. And
> it is not the side with the key. I'll have to try again.
There are SIX nuts, not four! Look more carefully!
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:hehfr2tm65bprsnjlcu4ab5alduid1vlcn@4ax.com:
> On Wed, 24 Jan 2007 18:07:31 +0000 (UTC), Tegger <tegger@tegger.c0m>
> wrote:
>
>>dgk <dgk@somewhere.com> wrote in
>>news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>>
>>
>>>
>>> It is, naturally, the light that gets water in it when it rains
>>> hard. I'll have to do some work on it this weekend.
>>
>>
>>
>>Replace the taillight gasket. It's making a poor seal and allowing
>>water in. You've likely got some corrosion in the affected sockets, so
>>a bit of work with some sandpaper would do you good.
>
> Thanks. Plus I probably have to change the bulb.I have the gasket,
> I've been meaning to change it for a few months. I tried once but
> couldn't get the plastic off even after removing the four bolts. And
> it is not the side with the key. I'll have to try again.
There are SIX nuts, not four! Look more carefully!
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
01-24-2007 | 08:20 PM
#25
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
dgk <dgk@somewhere.com> wrote in
news:hehfr2tm65bprsnjlcu4ab5alduid1vlcn@4ax.com:
> On Wed, 24 Jan 2007 18:07:31 +0000 (UTC), Tegger <tegger@tegger.c0m>
> wrote:
>
>>dgk <dgk@somewhere.com> wrote in
>>news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>>
>>
>>>
>>> It is, naturally, the light that gets water in it when it rains
>>> hard. I'll have to do some work on it this weekend.
>>
>>
>>
>>Replace the taillight gasket. It's making a poor seal and allowing
>>water in. You've likely got some corrosion in the affected sockets, so
>>a bit of work with some sandpaper would do you good.
>
> Thanks. Plus I probably have to change the bulb.I have the gasket,
> I've been meaning to change it for a few months. I tried once but
> couldn't get the plastic off even after removing the four bolts. And
> it is not the side with the key. I'll have to try again.
There are SIX nuts, not four! Look more carefully!
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:hehfr2tm65bprsnjlcu4ab5alduid1vlcn@4ax.com:
> On Wed, 24 Jan 2007 18:07:31 +0000 (UTC), Tegger <tegger@tegger.c0m>
> wrote:
>
>>dgk <dgk@somewhere.com> wrote in
>>news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>>
>>
>>>
>>> It is, naturally, the light that gets water in it when it rains
>>> hard. I'll have to do some work on it this weekend.
>>
>>
>>
>>Replace the taillight gasket. It's making a poor seal and allowing
>>water in. You've likely got some corrosion in the affected sockets, so
>>a bit of work with some sandpaper would do you good.
>
> Thanks. Plus I probably have to change the bulb.I have the gasket,
> I've been meaning to change it for a few months. I tried once but
> couldn't get the plastic off even after removing the four bolts. And
> it is not the side with the key. I'll have to try again.
There are SIX nuts, not four! Look more carefully!
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
01-24-2007 | 08:25 PM
#26
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
Tegger <tegger@tegger.c0m> wrote in
news:Xns98C2852C5CA08tegger@207.14.116.130:
> dgk <dgk@somewhere.com> wrote in
> news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
> Replace the taillight gasket. It's making a poor seal and allowing
> water in. You've likely got some corrosion in the affected sockets, so
> a bit of work with some sandpaper would do you good.
>
>
>
and use some dielectric grease to prevent more socket corrosion from
happening.
--
Jim Yanik
jyanik
at
kua.net
news:Xns98C2852C5CA08tegger@207.14.116.130:
> dgk <dgk@somewhere.com> wrote in
> news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
> Replace the taillight gasket. It's making a poor seal and allowing
> water in. You've likely got some corrosion in the affected sockets, so
> a bit of work with some sandpaper would do you good.
>
>
>
and use some dielectric grease to prevent more socket corrosion from
happening.
--
Jim Yanik
jyanik
at
kua.net
01-24-2007 | 08:25 PM
#27
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
Tegger <tegger@tegger.c0m> wrote in
news:Xns98C2852C5CA08tegger@207.14.116.130:
> dgk <dgk@somewhere.com> wrote in
> news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
> Replace the taillight gasket. It's making a poor seal and allowing
> water in. You've likely got some corrosion in the affected sockets, so
> a bit of work with some sandpaper would do you good.
>
>
>
and use some dielectric grease to prevent more socket corrosion from
happening.
--
Jim Yanik
jyanik
at
kua.net
news:Xns98C2852C5CA08tegger@207.14.116.130:
> dgk <dgk@somewhere.com> wrote in
> news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
> Replace the taillight gasket. It's making a poor seal and allowing
> water in. You've likely got some corrosion in the affected sockets, so
> a bit of work with some sandpaper would do you good.
>
>
>
and use some dielectric grease to prevent more socket corrosion from
happening.
--
Jim Yanik
jyanik
at
kua.net
01-24-2007 | 08:25 PM
#28
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
Tegger <tegger@tegger.c0m> wrote in
news:Xns98C2852C5CA08tegger@207.14.116.130:
> dgk <dgk@somewhere.com> wrote in
> news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
> Replace the taillight gasket. It's making a poor seal and allowing
> water in. You've likely got some corrosion in the affected sockets, so
> a bit of work with some sandpaper would do you good.
>
>
>
and use some dielectric grease to prevent more socket corrosion from
happening.
--
Jim Yanik
jyanik
at
kua.net
news:Xns98C2852C5CA08tegger@207.14.116.130:
> dgk <dgk@somewhere.com> wrote in
> news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
> Replace the taillight gasket. It's making a poor seal and allowing
> water in. You've likely got some corrosion in the affected sockets, so
> a bit of work with some sandpaper would do you good.
>
>
>
and use some dielectric grease to prevent more socket corrosion from
happening.
--
Jim Yanik
jyanik
at
kua.net
01-24-2007 | 08:25 PM
#29
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
Tegger <tegger@tegger.c0m> wrote in
news:Xns98C2852C5CA08tegger@207.14.116.130:
> dgk <dgk@somewhere.com> wrote in
> news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
> Replace the taillight gasket. It's making a poor seal and allowing
> water in. You've likely got some corrosion in the affected sockets, so
> a bit of work with some sandpaper would do you good.
>
>
>
and use some dielectric grease to prevent more socket corrosion from
happening.
--
Jim Yanik
jyanik
at
kua.net
news:Xns98C2852C5CA08tegger@207.14.116.130:
> dgk <dgk@somewhere.com> wrote in
> news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>
>
>>
>> It is, naturally, the light that gets water in it when it rains hard.
>> I'll have to do some work on it this weekend.
>
>
>
> Replace the taillight gasket. It's making a poor seal and allowing
> water in. You've likely got some corrosion in the affected sockets, so
> a bit of work with some sandpaper would do you good.
>
>
>
and use some dielectric grease to prevent more socket corrosion from
happening.
--
Jim Yanik
jyanik
at
kua.net
01-25-2007 | 01:59 PM
#30
Guest
Posts: n/a
Re: 91 Accord brake light indicater goes on
Jim Yanik <jyanik@abuse.gov> wrote in news:Xns98C2CFE3332B4jyanikkuanet@
64.209.0.86:
> Tegger <tegger@tegger.c0m> wrote in
> news:Xns98C2852C5CA08tegger@207.14.116.130:
>
>> dgk <dgk@somewhere.com> wrote in
>> news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>>
>>
>>>
>>> It is, naturally, the light that gets water in it when it rains hard.
>>> I'll have to do some work on it this weekend.
>>
>>
>>
>> Replace the taillight gasket. It's making a poor seal and allowing
>> water in. You've likely got some corrosion in the affected sockets, so
>> a bit of work with some sandpaper would do you good.
>>
>>
>>
>
> and use some dielectric grease to prevent more socket corrosion from
> happening.
>
Good point. Ordinary white lithium grease works just fine, in case you have
that. Even Sil-Glyde silicone grease works.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
64.209.0.86:
> Tegger <tegger@tegger.c0m> wrote in
> news:Xns98C2852C5CA08tegger@207.14.116.130:
>
>> dgk <dgk@somewhere.com> wrote in
>> news:39mer21fpfd7rlr1ghfj1craqjtk3k6839@ 4ax.com:
>>
>>
>>>
>>> It is, naturally, the light that gets water in it when it rains hard.
>>> I'll have to do some work on it this weekend.
>>
>>
>>
>> Replace the taillight gasket. It's making a poor seal and allowing
>> water in. You've likely got some corrosion in the affected sockets, so
>> a bit of work with some sandpaper would do you good.
>>
>>
>>
>
> and use some dielectric grease to prevent more socket corrosion from
> happening.
>
Good point. Ordinary white lithium grease works just fine, in case you have
that. Even Sil-Glyde silicone grease works.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/