90 Civic sedan"winshield moulding removal"
07-27-2005 | 10:31 PM
#1
Guest
Posts: n/a
90 Civic sedan"winshield moulding removal"
Hi all!
I have to change the winshield on my 1990 4 dr.From what i see it looks like
the moulding snap on the side of the winshield before you install it on the
car.Anyone has info on that removal procedure?
Will i have to buy new mouldings for it?
Thanks in advance.
P.S. This a very nice group!!! Regards to all.
I have to change the winshield on my 1990 4 dr.From what i see it looks like
the moulding snap on the side of the winshield before you install it on the
car.Anyone has info on that removal procedure?
Will i have to buy new mouldings for it?
Thanks in advance.
P.S. This a very nice group!!! Regards to all.
07-28-2005 | 11:23 AM
#2
Guest
Posts: n/a
Re: 90 Civic sedan"winshield moulding removal"
"ForSale" <patbro@gmail.com> wrote in
news:wsXFe.17$Al.43284@wagner.videotron.net:
> Hi all!
> I have to change the winshield on my 1990 4 dr.From what i see it
> looks like the moulding snap on the side of the winshield before you
> install it on the car.Anyone has info on that removal procedure?
> Will i have to buy new mouldings for it?
Probably;they get hardened from sun exposure.
BTW,your windshield is likely GLUED in to the frame,and must be done by a
professional if that is the case.
--
Jim Yanik
jyanik
at
kua.net
news:wsXFe.17$Al.43284@wagner.videotron.net:
> Hi all!
> I have to change the winshield on my 1990 4 dr.From what i see it
> looks like the moulding snap on the side of the winshield before you
> install it on the car.Anyone has info on that removal procedure?
> Will i have to buy new mouldings for it?
Probably;they get hardened from sun exposure.
BTW,your windshield is likely GLUED in to the frame,and must be done by a
professional if that is the case.
--
Jim Yanik
jyanik
at
kua.net
07-28-2005 | 11:23 AM
#3
Guest
Posts: n/a
Re: 90 Civic sedan"winshield moulding removal"
"ForSale" <patbro@gmail.com> wrote in
news:wsXFe.17$Al.43284@wagner.videotron.net:
> Hi all!
> I have to change the winshield on my 1990 4 dr.From what i see it
> looks like the moulding snap on the side of the winshield before you
> install it on the car.Anyone has info on that removal procedure?
> Will i have to buy new mouldings for it?
Probably;they get hardened from sun exposure.
BTW,your windshield is likely GLUED in to the frame,and must be done by a
professional if that is the case.
--
Jim Yanik
jyanik
at
kua.net
news:wsXFe.17$Al.43284@wagner.videotron.net:
> Hi all!
> I have to change the winshield on my 1990 4 dr.From what i see it
> looks like the moulding snap on the side of the winshield before you
> install it on the car.Anyone has info on that removal procedure?
> Will i have to buy new mouldings for it?
Probably;they get hardened from sun exposure.
BTW,your windshield is likely GLUED in to the frame,and must be done by a
professional if that is the case.
--
Jim Yanik
jyanik
at
kua.net
Thread
Thread Starter
Forum
Replies
Last Post
thcerbo
Car Care / Detailing / Paint / Visual Mods
4
04-14-2010 07:09 PM
thirdwheelgroupie
Car Audio & Electronics
1
11-01-2007 02:05 PM
Tinc
Traffic Tickets & Car Insurance Discussion
6
07-12-2007 02:40 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)