This is supposed to be a help and information forum. Maybe he didn't know it
was as simple as doing a straight measurement.


"Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
news:BvBse.27361$So7.27117@fe10.lga...
> "skipper" <bluejays_99@sympatico.ca> wrote in message
> news:UaBse.11386$Qr3.1195643@news20.bellglobal.com ...
> >
> > "Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
> > news:bbrse.1285$PH5.1009@news02.roc.ny...
> >> "skipper" <bluejays_99@sympatico.ca> wrote in message
> >> news:hrqse.7782$yU.666076@news20.bellglobal.com...
> >>>I was looking in my manual but it does not say what size the wipers are
> >>>on my 05 Accord LX-G?
> >>
> >> Got a tape measure?
> >
> > Smart ***' like you is what wrong with the world these days.
>
> No, I was serious. Just measure it. As for what's wrong with the world
> these days, which is worse, a smart *** or someone too dumb/lazy to
measure
> a wiper blade to see it's size?
>
> At least this "smart ***" can do for himself and not depend on others for
> even the simple stuff.
>
>

 

This is supposed to be a help and information forum. Maybe he didn't know it
was as simple as doing a straight measurement.


"Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
news:BvBse.27361$So7.27117@fe10.lga...
> "skipper" <bluejays_99@sympatico.ca> wrote in message
> news:UaBse.11386$Qr3.1195643@news20.bellglobal.com ...
> >
> > "Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
> > news:bbrse.1285$PH5.1009@news02.roc.ny...
> >> "skipper" <bluejays_99@sympatico.ca> wrote in message
> >> news:hrqse.7782$yU.666076@news20.bellglobal.com...
> >>>I was looking in my manual but it does not say what size the wipers are
> >>>on my 05 Accord LX-G?
> >>
> >> Got a tape measure?
> >
> > Smart ***' like you is what wrong with the world these days.
>
> No, I was serious. Just measure it. As for what's wrong with the world
> these days, which is worse, a smart *** or someone too dumb/lazy to
measure
> a wiper blade to see it's size?
>
> At least this "smart ***" can do for himself and not depend on others for
> even the simple stuff.
>
>

 

skipper wrote:
> Smart ***' like you is what wrong with the world these days.

His answer is valid. A tape measure will give all the necessary
information.

>
>
> "Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
> news:bbrse.1285$PH5.1009@news02.roc.ny...
>> "skipper" <bluejays_99@sympatico.ca> wrote in message
>> news:hrqse.7782$yU.666076@news20.bellglobal.com...
>>> I was looking in my manual but it does not say what size the wipers
>>> are on my 05 Accord LX-G?
>>
>> Got a tape measure?

 

skipper wrote:
> Smart ***' like you is what wrong with the world these days.

His answer is valid. A tape measure will give all the necessary
information.

>
>
> "Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
> news:bbrse.1285$PH5.1009@news02.roc.ny...
>> "skipper" <bluejays_99@sympatico.ca> wrote in message
>> news:hrqse.7782$yU.666076@news20.bellglobal.com...
>>> I was looking in my manual but it does not say what size the wipers
>>> are on my 05 Accord LX-G?
>>
>> Got a tape measure?

 

"MisterG" <glenn.buteau@rogers.com> wrote in message
news:veOdnWA9u-oIhynfRVn-3Q@rogers.com...
> This is supposed to be a help and information forum. Maybe he didn't know
> it
> was as simple as doing a straight measurement.

Right, which I informed him of, and he copped an attitude over. My initial
answer wasn't "measure it you ***", it was "got a tape measure". He then
retorted with attitude. Now, he can go screw himself.


> "Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
> news:BvBse.27361$So7.27117@fe10.lga...
>> "skipper" <bluejays_99@sympatico.ca> wrote in message
>> news:UaBse.11386$Qr3.1195643@news20.bellglobal.com ...
>> >
>> > "Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
>> > news:bbrse.1285$PH5.1009@news02.roc.ny...
>> >> "skipper" <bluejays_99@sympatico.ca> wrote in message
>> >> news:hrqse.7782$yU.666076@news20.bellglobal.com...
>> >>>I was looking in my manual but it does not say what size the wipers
>> >>>are
>> >>>on my 05 Accord LX-G?
>> >>
>> >> Got a tape measure?
>> >
>> > Smart ***' like you is what wrong with the world these days.
>>
>> No, I was serious. Just measure it. As for what's wrong with the world
>> these days, which is worse, a smart *** or someone too dumb/lazy to
> measure
>> a wiper blade to see it's size?
>>
>> At least this "smart ***" can do for himself and not depend on others for
>> even the simple stuff.
>>
>>
>
>

 

"MisterG" <glenn.buteau@rogers.com> wrote in message
news:veOdnWA9u-oIhynfRVn-3Q@rogers.com...
> This is supposed to be a help and information forum. Maybe he didn't know
> it
> was as simple as doing a straight measurement.

Right, which I informed him of, and he copped an attitude over. My initial
answer wasn't "measure it you ***", it was "got a tape measure". He then
retorted with attitude. Now, he can go screw himself.


> "Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
> news:BvBse.27361$So7.27117@fe10.lga...
>> "skipper" <bluejays_99@sympatico.ca> wrote in message
>> news:UaBse.11386$Qr3.1195643@news20.bellglobal.com ...
>> >
>> > "Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
>> > news:bbrse.1285$PH5.1009@news02.roc.ny...
>> >> "skipper" <bluejays_99@sympatico.ca> wrote in message
>> >> news:hrqse.7782$yU.666076@news20.bellglobal.com...
>> >>>I was looking in my manual but it does not say what size the wipers
>> >>>are
>> >>>on my 05 Accord LX-G?
>> >>
>> >> Got a tape measure?
>> >
>> > Smart ***' like you is what wrong with the world these days.
>>
>> No, I was serious. Just measure it. As for what's wrong with the world
>> these days, which is worse, a smart *** or someone too dumb/lazy to
> measure
>> a wiper blade to see it's size?
>>
>> At least this "smart ***" can do for himself and not depend on others for
>> even the simple stuff.
>>
>>
>
>

 

Seth wrote:
> "MisterG" <glenn.buteau@rogers.com> wrote in message
> news:veOdnWA9u-oIhynfRVn-3Q@rogers.com...
>> This is supposed to be a help and information forum. Maybe he didn't
>> know it
>> was as simple as doing a straight measurement.
>
> Right, which I informed him of, and he copped an attitude over. My
> initial answer wasn't "measure it you ***", it was "got a tape
> measure". He then retorted with attitude. Now, he can go screw
> himself.

If I were to ask that same question, your response would have been enough
information for me to find out the answer, which fits right in with the
"help and information forum". I would have thanked you for the info.

I guess it all depends on perception.....as well we all know usenet is
anarchy.......

>
>> "Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
>> news:BvBse.27361$So7.27117@fe10.lga...
>>> "skipper" <bluejays_99@sympatico.ca> wrote in message
>>> news:UaBse.11386$Qr3.1195643@news20.bellglobal.com ...
>>>>
>>>> "Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
>>>> news:bbrse.1285$PH5.1009@news02.roc.ny...
>>>>> "skipper" <bluejays_99@sympatico.ca> wrote in message
>>>>> news:hrqse.7782$yU.666076@news20.bellglobal.com...
>>>>>> I was looking in my manual but it does not say what size the
>>>>>> wipers are
>>>>>> on my 05 Accord LX-G?
>>>>>
>>>>> Got a tape measure?
>>>>
>>>> Smart ***' like you is what wrong with the world these days.
>>>
>>> No, I was serious. Just measure it. As for what's wrong with the
>>> world these days, which is worse, a smart *** or someone too
>>> dumb/lazy to measure a wiper blade to see it's size?
>>>
>>> At least this "smart ***" can do for himself and not depend on
>>> others for even the simple stuff.

 

Seth wrote:
> "MisterG" <glenn.buteau@rogers.com> wrote in message
> news:veOdnWA9u-oIhynfRVn-3Q@rogers.com...
>> This is supposed to be a help and information forum. Maybe he didn't
>> know it
>> was as simple as doing a straight measurement.
>
> Right, which I informed him of, and he copped an attitude over. My
> initial answer wasn't "measure it you ***", it was "got a tape
> measure". He then retorted with attitude. Now, he can go screw
> himself.

If I were to ask that same question, your response would have been enough
information for me to find out the answer, which fits right in with the
"help and information forum". I would have thanked you for the info.

I guess it all depends on perception.....as well we all know usenet is
anarchy.......

>
>> "Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
>> news:BvBse.27361$So7.27117@fe10.lga...
>>> "skipper" <bluejays_99@sympatico.ca> wrote in message
>>> news:UaBse.11386$Qr3.1195643@news20.bellglobal.com ...
>>>>
>>>> "Seth" <seth_lermanNOSPAM@hotmail.com> wrote in message
>>>> news:bbrse.1285$PH5.1009@news02.roc.ny...
>>>>> "skipper" <bluejays_99@sympatico.ca> wrote in message
>>>>> news:hrqse.7782$yU.666076@news20.bellglobal.com...
>>>>>> I was looking in my manual but it does not say what size the
>>>>>> wipers are
>>>>>> on my 05 Accord LX-G?
>>>>>
>>>>> Got a tape measure?
>>>>
>>>> Smart ***' like you is what wrong with the world these days.
>>>
>>> No, I was serious. Just measure it. As for what's wrong with the
>>> world these days, which is worse, a smart *** or someone too
>>> dumb/lazy to measure a wiper blade to see it's size?
>>>
>>> At least this "smart ***" can do for himself and not depend on
>>> others for even the simple stuff.

 

"L Alpert" <alpertl@xxgmail.com> wrote in message
news:47-dnUbLKenX4ijfRVn-sw@comcast.com...
>
> If I were to ask that same question, your response would have been enough
> information for me to find out the answer, which fits right in with the
> "help and information forum". I would have thanked you for the info.

So what you're saying (if I follow your line of thought here), is that being
asked if you have a tape measure would have confused you and not helped you
find the lengths of your wiper blades?

Brian

 

"L Alpert" <alpertl@xxgmail.com> wrote in message
news:47-dnUbLKenX4ijfRVn-sw@comcast.com...
>
> If I were to ask that same question, your response would have been enough
> information for me to find out the answer, which fits right in with the
> "help and information forum". I would have thanked you for the info.

So what you're saying (if I follow your line of thought here), is that being
asked if you have a tape measure would have confused you and not helped you
find the lengths of your wiper blades?

Brian

 

"Brian Smith" wrote

>
> "L Alpert" wrote

> >
> > If I were to ask that same question, your response would have been
enough
> > information for me to find out the answer, which fits right in with the
> > "help and information forum". I would have thanked you for the info.
>
> So what you're saying (if I follow your line of thought here), is that
being
> asked if you have a tape measure would have confused you and not helped
you
> find the lengths of your wiper blades?

I think he means just the opposite. "Got a tape measure?" would mean, "Oh, I
can measure this myself; I thought maybe there was some fancy way to have to
do that -- thank you."
> Brian
>
>

 

"Brian Smith" wrote

>
> "L Alpert" wrote

> >
> > If I were to ask that same question, your response would have been
enough
> > information for me to find out the answer, which fits right in with the
> > "help and information forum". I would have thanked you for the info.
>
> So what you're saying (if I follow your line of thought here), is that
being
> asked if you have a tape measure would have confused you and not helped
you
> find the lengths of your wiper blades?

I think he means just the opposite. "Got a tape measure?" would mean, "Oh, I
can measure this myself; I thought maybe there was some fancy way to have to
do that -- thank you."
> Brian
>
>

 

"Howard Lester" <heylester@dakotacom.net> wrote in message
news:11bb4i2tgcqcd57@corp.supernews.com...
>
> I think he means just the opposite. "Got a tape measure?" would mean, "Oh,
> I
> can measure this myself; I thought maybe there was some fancy way to have
> to
> do that -- thank you."

Entirely possible I suppose. It's hard to decipher some thoughts when
there's a lack of emotion able to be displayed in this medium.

A tape measure is the quickest and usually the most efficient method, of
finding the length of medium to large items.

Brian

 

"Howard Lester" <heylester@dakotacom.net> wrote in message
news:11bb4i2tgcqcd57@corp.supernews.com...
>
> I think he means just the opposite. "Got a tape measure?" would mean, "Oh,
> I
> can measure this myself; I thought maybe there was some fancy way to have
> to
> do that -- thank you."

Entirely possible I suppose. It's hard to decipher some thoughts when
there's a lack of emotion able to be displayed in this medium.

A tape measure is the quickest and usually the most efficient method, of
finding the length of medium to large items.

Brian

 

Brian Smith wrote:
> "L Alpert" <alpertl@xxgmail.com> wrote in message
> news:47-dnUbLKenX4ijfRVn-sw@comcast.com...
>>
>> If I were to ask that same question, your response would have been
>> enough information for me to find out the answer, which fits right
>> in with the "help and information forum". I would have thanked you
>> for the info.
>
> So what you're saying (if I follow your line of thought here), is
> that being asked if you have a tape measure would have confused you
> and not helped you find the lengths of your wiper blades?
>
> Brian

No, I am saying that his response would have reminded me that the solution
is as simple as using a ruler to measure them.