honda / acura sponsored by www.hondapoint.com - integra, civic, accord/tsx, crx nsx

Replacing Horn in an EF

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 02-27-2006 | 06:58 PM
  #1  
GinoLicious's Avatar
Thread Starter
Skilled GTcars Poster
 
Joined: Feb 2005
Posts: 782
Rep Power: 736
GinoLicious street rep is low. keep going
Replacing Horn in an EF

I am wondering on how to replace my horn in my car. I have a horn, but it does not work. Im thinking that it is not hooked up. How should i go about hooking it up?
Old 02-27-2006 | 08:28 PM
  #2  
Theriault_honda's Avatar
~~ Hardcore Newb ~~
 
Joined: Jan 2006
Posts: 111
From: cobourg
Rep Power: 688
Theriault_honda street rep is low. keep going
Your horn inside your bumper if their two wires coming off of it its plugged in. If still not working replace horn. only one 10mm bolt holding it on. if your lucky all you have to do is take off the lower bumper plastic shroud. If not honda tech will assit you with taking ur bumper off.
Old 06-12-2006 | 10:24 AM
  #3  
crxtyperturbo's Avatar
~~ Hardcore Newb ~~
 
Joined: Jun 2006
Posts: 32
From: Bradford
Rep Power: 673
crxtyperturbo street rep is low. keep going
easy to fix, just fixed mine on the rex.. you might have possible wire curossion and may need to replace the wires, if not then either the horn under the bumper cover is toast and you'll need to replace it or the ground connection behind the steering wheel is not contacting properly
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mr.mitsu
Want To Buy
3
09-25-2005 10:27 AM
cih
Want To Buy
1
05-05-2005 05:02 PM
lagreat
Want To Buy
0
05-04-2005 09:15 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Replacing Horn in an EF



All times are GMT -4. The time now is 11:22 AM.

Page generated in 0.08578 seconds with 6 queries