Rep Power: 568

I blew my d-series motor, and found a B18A1 complete motor. What all do i need to put this motor into my car?

Thanks
Kurtis

 
Rep Power: 576

you'll need b-series engine mounts and tranny bracket, b-series axles and half-shaft, b-series shifter linkages and to possibly do some wiring depending on which year engine is going into what year car. You'll also need the apropriate pr4 or p75 ecu and possibly an ecu conversion harness.

What year car do you want to put this (probably obd0 B18A1) engine into?

 
Rep Power: 568

1998 civic si, the guy who i bought the motor off said it was obd1

 
Rep Power: 0

should be OBD1?

 
Rep Power: 568

Does anybody know where i can buy all of that? and B series axles well work? I dont have to get custom mad ones?

you'll need b-series engine mounts and tranny bracket, b-series axles and half-shaft, b-series shifter linkages and to possibly do some wiring depending on which year engine is going into what year car. You'll also need the apropriate pr4 or p75 ecu and possibly an ecu conversion harness

 
Rep Power: 576

well you can use 94-01 integra axles, half-shaft and shifter linkages and then you'll need 99-00 SiR engine mounts and rear bracket.

Then you'll need an obd2a p75 ecu (to be plug and play) or an obd2a-obd1 ecu conversion harness and obd1 pr4/p75 if you wanna convert to obd1.

You should just re-use your stock civic engine harness and modify it where needed (dizzy, IAT sensor, etc etc).

You can get these items either from local car forums, junk yard/importer or kijiji.