Any trick to a stuck main pulley bolt? 98 2.3 Accord
07-04-2007 | 12:42 PM
#1
Thread Starter
~~ Hardcore Newb ~~
Joined: Jul 2007
Posts: 2
From: under where?
Rep Power: 0 
Any trick to a stuck main pulley bolt? 98 2.3 Accord
I have tried removing my main pulley bolt with a 700ft lb impact at 6.5 scfm, with NO luck! Followed the stupid Haynes manual way and used a chain pipe wrench that just chipped my smaller outer pulley lip. Heat/cool didn't work. No room for a Breaker Bar (thats how/when the pulley broke!) HELP!!!!
07-20-2007 | 07:09 PM
#2
~~ Hardcore Newb ~~
Joined: May 2007
Posts: 5
From: Minnesota
Rep Power: 0
Two ways to get the bolt out.
1) Bite the bullet and buy the proper tool. Pict attached.
2) Install socket and wedge breaker bar against the concrete floor and hit the starter. Of course, you risk fracturing the crankshaft this way.
1) Bite the bullet and buy the proper tool. Pict attached.
2) Install socket and wedge breaker bar against the concrete floor and hit the starter. Of course, you risk fracturing the crankshaft this way.
Thread
Thread Starter
Forum
Replies
Last Post
sonata owner
Hyundai Mailing List
12
04-30-2006 09:29 PM
sonata owner
Hyundai Mailing List
0
04-07-2006 09:23 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)