Do not use Valvoline SynPower fuel cleaner.
#1
Do not use Valvoline SynPower fuel cleaner.
I tried some not to long and I have been very disappointed with the results so far. Basically the story goes like this, I top off my car with some 93 octane gas and drive to work. On the way to work my engine was reading zero on knock retard. That night I add a bottle of the above mentioned fuel system treatment and since that day my engine now has to pull it's timing back under any throttle load. Under a heavy throttle load the engine is having to pull back its timing between 4 and 8 degrees. I will never use Valvoline products again because of this shitty fuel cleaner. I'm still way over 3/4 of a tank so I might try adding some octane booster to see if that helps.
#4
I keep forgetting to pickup the booster. I did a heavy throttle run today and the scan master recorded an 02 reading of 925 milivolts with a knock retard of 5.0. I need to go into town later so I guess I will have to break down and use one of my 104+ bottles and see if that helps. As for fuel cleaners I do agree Lucas does work good but I would never buy it because of the fact I hate the brand itself.
#5
lucas is known snake oil on the oil side, so I have a hard time with anything they make.Once you get it going again try seafoam and see what it does, it may be the cleaner itself doesn't burn
#8
Forgot to mention that octane boosters will foul your spark plugs. I pulled mine out at 20,000 miles, to see them fouled. You are really better off just doing a 100 octane mix with whatever premium fuel is, in your state.
#9
Originally Posted by robluvs2xlr8
Forgot to mention that octane boosters will foul your spark plugs. I pulled mine out at 20,000 miles, to see them fouled. You are really better off just doing a 100 octane mix with whatever premium fuel is, in your state.
Thread
Thread Starter
Forum
Replies
Last Post
IlBeBauck@gmail.com
Hyundai Mailing List
20
07-13-2008 03:23 AM
John Horner
Honda Mailing List
3
05-20-2004 08:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)