Vortech S-Trim - So real men get blown - SUPERCHARGER PICS
12-10-2006 | 08:28 PM
#1
Vortech S-Trim - So real men get blown - SUPERCHARGER PICS
Vortech V1 S-Trim
Well, i got bored and look what i did
Luckily for me my buddy was around to take a trip and pick this up for me. Im ready to rock and roll for next summer again, this is the 3rd blown setup ill be running. The S-Trim should be just perfect. I can live with 450 at the wheels though i know theres FAR more in this blower.
Well, i got bored and look what i did
Luckily for me my buddy was around to take a trip and pick this up for me. Im ready to rock and roll for next summer again, this is the 3rd blown setup ill be running. The S-Trim should be just perfect. I can live with 450 at the wheels though i know theres FAR more in this blower.
12-11-2006 | 01:31 PM
#4
Junior GTcars Poster
Joined: Oct 2006
Posts: 287
Rep Power: 665 
dibs on the first ride of the season this spring 
450 RWHP is a pretty decent number, although I think I'll have to bring up the Lightning, that'd be a good race....a 4500 pound pickup making 600RWHP vs a mustang hatch making 450
450 RWHP is a pretty decent number, although I think I'll have to bring up the Lightning, that'd be a good race....a 4500 pound pickup making 600RWHP vs a mustang hatch making 450
12-28-2006 | 05:54 PM
#9
12-29-2006 | 07:46 PM
#12
Running a BBK SSI intake, Edelbrock heads (oring + studded), adj roller rockers, e cam, rods, crank & pistons. Its a beatty woods 306 shortblock.
I made 660 RWHP with my turbo setup, with this i would like to make between 420-550.
Just want to enjoy it.
12-29-2006 | 07:59 PM
#13
Junior GTcars Poster
Joined: Dec 2006
Posts: 246
Rep Power: 656
I have a new set up not pictured in my pics of the car.
Performer rpm ported upper and lower, victor jr heads
with crane energizer roller rockers custom ground cam
that is 565 lift, not sure on duration but its a blower cam
and a stock bottom end with fly cut pistons, Motor made
547 rear wheel hp in my friends car and 499 tq. were you running
a stock block when you made 660hp?
Performer rpm ported upper and lower, victor jr heads
with crane energizer roller rockers custom ground cam
that is 565 lift, not sure on duration but its a blower cam
and a stock bottom end with fly cut pistons, Motor made
547 rear wheel hp in my friends car and 499 tq. were you running
a stock block when you made 660hp?
12-29-2006 | 08:02 PM
#14
12-29-2006 | 08:23 PM
#15
Junior GTcars Poster
Joined: Dec 2006
Posts: 246
Rep Power: 656
Im running the Mt et street radial they hook up nice
and Ive even had to drive home on the 410 in a Thunder storm
and got home in 1 piece. With my old et streets I would have had to
wait under a bridge for 3 hours.
and Ive even had to drive home on the 410 in a Thunder storm
and got home in 1 piece. With my old et streets I would have had to
wait under a bridge for 3 hours.