Port and polish
07-29-2006 | 09:42 AM
#1
Thread Starter
Skilled GTcars Poster
Joined: Oct 2004
Posts: 731
From: St. Petersburg, FL
Rep Power: 748 
Port and polish
What can I expect to pay to get my head ported and polished?? I was thinking also of getting bigger valves like 202/195 what would I be looking at price wise?
07-29-2006 | 10:32 PM
#2
~~~ SITE SPONSOR ~~~
Joined: Apr 2003
Posts: 2,101
From: Grand Ol' WNY
Rep Power: 829
For the price of a hand port/polish you can almost get into a set of alum CNC'd heads that are ready to bolt on.
But since you asked for a price, I would say a decent job will run you well over a grand..
But since you asked for a price, I would say a decent job will run you well over a grand..
07-30-2006 | 01:01 AM
#5
Experienced GTcars Poster
Joined: Oct 2004
Posts: 1,757
From: Pittsburg, CA
Rep Power: 769
Originally Posted by Camarocam
What can I expect to pay to get my head ported and polished?? I was thinking also of getting bigger valves like 202/195 what would I be looking at price wise?
08-01-2006 | 01:20 AM
#8
GTcars Regular
Joined: Oct 2004
Posts: 1,103
From: nw suburbs of chicago
Rep Power: 756
well considering the 416 heads are 1/5 of the price and there are poelpe running 13's with them id say they wouldnt be a bad choice... but he same guy is now running 12's with vortecs.. depends on how much u wanna spend... id say vortecs...
.... what now dousche bag jesse?!?!??
08-01-2006 | 02:13 AM
#10
Experienced GTcars Poster
Joined: Oct 2004
Posts: 1,757
From: Pittsburg, CA
Rep Power: 769
Originally Posted by niceroc
well considering the 416 heads are 1/5 of the price and there are poelpe running 13's with them id say they wouldnt be a bad choice... but he same guy is now running 12's with vortecs.. depends on how much u wanna spend... id say vortecs...
1/5th the price? point in the direction of some brand new 416 heads that are 1/5 the price. Thought not
08-01-2006 | 11:46 AM
#12
GTcars Regular
Joined: Oct 2004
Posts: 1,103
From: nw suburbs of chicago
Rep Power: 756
Originally Posted by JesasaurusRex
1/5th the price? point in the direction of some brand new 416 heads that are 1/5 the price. Thought not
08-01-2006 | 01:57 PM
#13
Experienced GTcars Poster
Joined: Oct 2004
Posts: 1,757
From: Pittsburg, CA
Rep Power: 769
used? wow somebody got over
heres some large port vortec heads brand new complete for $499.99
http://www.sdpc2000.com/catalog/3129...inder-Head.htm
heres some standard port vortec heads brand new complete for $489.99
http://www.sdpc2000.com/catalog/3129...inder-Head.htm
course theres the added cost of a vortec intake manifold or you could use a standard one for a raised runner now as well since the heads have both bolt patterns.
But ya, i doubt you can find brand new complete 416s for 100 bux. Or even 200. Plus the vortec head design is light years ahead (no pun intended).
heres some large port vortec heads brand new complete for $499.99
http://www.sdpc2000.com/catalog/3129...inder-Head.htm
heres some standard port vortec heads brand new complete for $489.99
http://www.sdpc2000.com/catalog/3129...inder-Head.htm
course theres the added cost of a vortec intake manifold or you could use a standard one for a raised runner now as well since the heads have both bolt patterns.
But ya, i doubt you can find brand new complete 416s for 100 bux. Or even 200. Plus the vortec head design is light years ahead (no pun intended).
08-03-2006 | 08:20 PM
#15
Experienced GTcars Poster
Joined: Oct 2004
Posts: 1,757
From: Pittsburg, CA
Rep Power: 769
Originally Posted by Camarocam
Ok well I guess I will just save for some vortec I read a couple artices about them they are prettygood from what it says.