help im confused
#1
Thread Starter
Junior GTcars Poster
Joined: Nov 2005
Posts: 371
From: hicksvill new hampshire
Rep Power: 699
help im confused
ok my z-28 has the misfortune of being equipt with a rochester quadra JUNK. well it appers as if the floats stuck open so its just drownding the engin how ever the plugs are bone dry where the hell is the gas goin. the engin turns over real slow even with a full battery. could one or 2 of the cyclenders be full of gas and slowin it down. i only pulled 3 plugs. the engin turns over fast enoguht to fire but dosnt do any thing but drowned but again the plugs are dry:banghead: :banghead: the first time i tryed starting it i prymed it but it still did nothing i,m ganna clena my distibutor cap tomarrow and what not. its the blah blah acdelco hei blah so dose it have points or not
#3
Thread Starter
Junior GTcars Poster
Joined: Nov 2005
Posts: 371
From: hicksvill new hampshire
Rep Power: 699
lol well put it this way on the back side of the primarys theres a little vent correct? gass is squarting right out of there and down over the primary flaps like alot of it. or unless that somthingto do with the choke (im farly new to carbs but i get the idea of them and theres gass setting on the flaps of the secondarys. so i can deffinatly smell gas . ok ok is it possable for there to be a rats nest in the intake manifold because ther was one inthe air cleaner?
#5
Thread Starter
Junior GTcars Poster
Joined: Nov 2005
Posts: 371
From: hicksvill new hampshire
Rep Power: 699
that would eplane why its looks like its gettin flodded but not getting nay thing the damn nest woul catch it all. ill check that out to. maybe i just think its begin flooded lol im not used to carbs this big im used to lawn moweres and sled carbs.
#6
If you plugs are dry it's not getting flooded. Most likely the carb needs a good cleaning and rebuild if it's been sitting a long time. If you unbolt the carb and lift it up a little when you pull the throttle you'll see if gas is being sprayed. At the minimum I'd pull the carb and spray the hell out of it with a big ol can of carb cleaner.
However if it wouldn't even fire if you primed it, I'd guess you have 2 issues going on.
However if it wouldn't even fire if you primed it, I'd guess you have 2 issues going on.
#7
Thread Starter
Junior GTcars Poster
Joined: Nov 2005
Posts: 371
From: hicksvill new hampshire
Rep Power: 699
yeah i think im not getting fire to the plugs lol tommrrow ill have my frind hold em wial i turn it over itll make my whole day. i think im ganna spray it and if that dosnt help then ill rebuild it
Thread
Thread Starter
Forum
Replies
Last Post
katgirl
Motorcycle Section
5
07-06-2007 02:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)