Rep Power: 699

For all those interested in the rear drum to disc conversion, I found this walkthrough.
http://forum.camarov6.com/showthread.php?t=63738

 
Rep Power: 1036

thank you!... someone should sticky that possibly.

 
Rep Power: 829

I will have the all the parts necessary for this for you V6 guys, minus the rotors, pads and shims that you might need- If anyone is interested.

They are comin off my other Z as its getting ready to hit the boneyard-

So to clear it up, it will be-
-calipers and all associated e-brake parts with those
-e-brake cables
-backing plates and bolts

I have the rotors, but they aren't worth much, they were just stock style and they are rusty, better off buying new anyway.

 
Rep Power: 1036

I might be interested in a couple months... If you still have them then.

 
Rep Power: 910

http://www.projectcamaro.net/forum/s...ead.php?t=2636

i used loochy's walkthrough for my v6 2 years ago when i was a complete car noob and had no problems. and dont worry about shims.

 
Rep Power: 699

FORCE FED Z
How much do you want? I am looking at doing this conversion ASAP and TA Creations is sold out of their kits, and I don't want the stock rotors anyway.

 
Rep Power: 718

yeah, i posted that on this site too, its also on my cardomain

 
Rep Power: 748

hey on this note i got a question.. anybody know anything about the e-brake auto-on headlight module/switch.. i swapped my rear end over about a year ago.. and i didnt think about there being any relation but thats about the same time my switch quit working.. like my headlights are alwasy on.. used to be i could pull the ebrake up and then turn the ignition off and back on and the lights would stay off.. the ebrake is suposed to disable the autmatic eye sensor.. but mine isnt working properly.. ne siggesitons?