LOW RIDER MAZDA B2200 Truck w/ Hydro's can jump 1ft sits 0.5" off ground
06-17-2008 | 03:58 PM
#1
Thread Starter
~~ Hardcore Newb ~~
Joined: Mar 2005
Posts: 98
Rep Power: 720 
LOW RIDER MAZDA B2200 Truck w/ Hydro's can jump 1ft sits 0.5" off ground
Advertising this for my roommate, the truck has to go!!!
It needs some work, basically a paint job. He's invested over $10,000 into it and just doesnt have the time or patience to finish it. My parents want the truck off our property beacuse its been here for 5 yrs now.
Here's the details about the truck.
Mazda B2200, has a rebuilt engine in it, prior to it being stored. He spent like $3000 or so on that. It runs fine. its a 4 cyl.
Replaced the majority of the body panels, everything except the cab. New fenders, bed, bed cover by ARE spent $1100 on that. The truck is painted with primer right now, primer grey.
It has pathfinder chromed rims, with low profile tires.
It can sit flat on the ground in the front end, when lowered with the hydro's and about 1" off the ground in the rear end.
The hydro's in this truck are CAE i believe. The setup installed costed him $5000 about 6 yrs ago. Its comes with a 8 or 10 button switches, 2 CAE pumps and the 4 actuators. Me personally, I have had the truck jumping about the height of a basket ball in the front. The rear is harder to jump. It just takes practice and patience. But its fun as hell making it jump.
The hydro setup was all mounted in the bed, and closed by a ARE locking hardtop, to prevent theft.
We tore the bed and front fenders off the truck last summer because we were going to improve the hydro mounting points as to try to gain the ability to three wheel and jump the rear end. Which was totally possible, but we just got too caught up on drinking beers and watching sports. SO for the person looking for a project, this is for you.. This truck turns heads when its moving, and with a good paint job, wow.
It also comes iwth a chromed out grille custom made to fit which was order from a low rider catalogue.. It looks sick. he spent about $900 on that.
And GTi bucket seats aswell. Interior has new carpet too. The dash was removed because we were going to make a custom dash, but never finished that either.
Overall, if your looking for a project dont pass this up, his lost is your gain.
ps. he was asking $4000 last august. It just has to go. Somebody could part this truck, the hydraulics are worth the $1500 alone.
http://toronto.kijiji.ca/c-cars-vehicles-SUVs-trucks-vans-LOW-RIDER-MAZDA-B2200-truck-with-Hydros-jumps-1ft-can-sit-0-5-W0QQAdIdZ56519414
check the link if need be
It needs some work, basically a paint job. He's invested over $10,000 into it and just doesnt have the time or patience to finish it. My parents want the truck off our property beacuse its been here for 5 yrs now.
Here's the details about the truck.
Mazda B2200, has a rebuilt engine in it, prior to it being stored. He spent like $3000 or so on that. It runs fine. its a 4 cyl.
Replaced the majority of the body panels, everything except the cab. New fenders, bed, bed cover by ARE spent $1100 on that. The truck is painted with primer right now, primer grey.
It has pathfinder chromed rims, with low profile tires.
It can sit flat on the ground in the front end, when lowered with the hydro's and about 1" off the ground in the rear end.
The hydro's in this truck are CAE i believe. The setup installed costed him $5000 about 6 yrs ago. Its comes with a 8 or 10 button switches, 2 CAE pumps and the 4 actuators. Me personally, I have had the truck jumping about the height of a basket ball in the front. The rear is harder to jump. It just takes practice and patience. But its fun as hell making it jump.
The hydro setup was all mounted in the bed, and closed by a ARE locking hardtop, to prevent theft.
We tore the bed and front fenders off the truck last summer because we were going to improve the hydro mounting points as to try to gain the ability to three wheel and jump the rear end. Which was totally possible, but we just got too caught up on drinking beers and watching sports. SO for the person looking for a project, this is for you.. This truck turns heads when its moving, and with a good paint job, wow.
It also comes iwth a chromed out grille custom made to fit which was order from a low rider catalogue.. It looks sick. he spent about $900 on that.
And GTi bucket seats aswell. Interior has new carpet too. The dash was removed because we were going to make a custom dash, but never finished that either.
Overall, if your looking for a project dont pass this up, his lost is your gain.
ps. he was asking $4000 last august. It just has to go. Somebody could part this truck, the hydraulics are worth the $1500 alone.
http://toronto.kijiji.ca/c-cars-vehicles-SUVs-trucks-vans-LOW-RIDER-MAZDA-B2200-truck-with-Hydros-jumps-1ft-can-sit-0-5-W0QQAdIdZ56519414
check the link if need be
Thread
Thread Starter
Forum
Replies
Last Post
RIKA FURY
Other Honda Models
1
01-13-2008 09:28 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)