Sparco 3-Point Race Harness X2 ++++
05-17-2006 | 05:09 PM
#1
Thread Starter
Average GTcars Poster
Joined: Feb 2005
Posts: 601
From: Etobicoke
Rep Power: 733 
Sparco 3-Point Race Harness X2 ++++
FOR SALE as a Package
TWO (2) Sparco Clubman 3-Point Race Harness/Seatbelts.
Four (4) Sabalt Harness Pads (2 per Harness/Seatbelt)
Condition of Harness/Seatbelts:
Used 1000 hours in Subaru Impreza WRX on Canadian Rally tour. The policy of my team is that seatbelts amongst other safety equipment must be replaced upon 1000 hours of usage. The belts are approximately 2 years old and have minimal/no wear on them. You can use them for street/strip/race or your own rally car. They install easily into any rollcage or harness bar OR into the stock mounting anchors of your current vehicle (1 point on either side of drive and 1 that goes into the rear seat mount anchor where your rear seatbelts are mounted. They have all the installation/operation paperwork and the original bag. Only thing not included are mounting bolts. Stock or aftermarket mounting bolts fit harnesses without a problem.
The pads aren't your standard ricer pad which have the padding on the outside, they are designed to keep to the seatbelt from digging into your shoulders. So these aren't some cheap pads you'd pick up from Momo to enhance the looks of your car. They are functional.
You are more than welcome to come by my house (in Etobicoke) or garage (Georgetown) and take a look at them before you buy. Check them out thoroughly and ask questions. I want to sell them as a package because the drive and navigator harness/seatbelts are replaced concurrently.
Asking $200 for 2 harness/seatbelts and the 4 pads (2 per harness). OR BEST OFFER No lowballers, tire kickers, ricers or fools please.
Jeff @ 416-233-9920
Pictures for those that don't understand:
Harness Pads. Notice padding on back, not front of pad.
3 point harness/seatbelts. 3 anchor points + 6 adjustment points.
TWO (2) Sparco Clubman 3-Point Race Harness/Seatbelts.
Four (4) Sabalt Harness Pads (2 per Harness/Seatbelt)
Condition of Harness/Seatbelts:
Used 1000 hours in Subaru Impreza WRX on Canadian Rally tour. The policy of my team is that seatbelts amongst other safety equipment must be replaced upon 1000 hours of usage. The belts are approximately 2 years old and have minimal/no wear on them. You can use them for street/strip/race or your own rally car. They install easily into any rollcage or harness bar OR into the stock mounting anchors of your current vehicle (1 point on either side of drive and 1 that goes into the rear seat mount anchor where your rear seatbelts are mounted. They have all the installation/operation paperwork and the original bag. Only thing not included are mounting bolts. Stock or aftermarket mounting bolts fit harnesses without a problem.
The pads aren't your standard ricer pad which have the padding on the outside, they are designed to keep to the seatbelt from digging into your shoulders. So these aren't some cheap pads you'd pick up from Momo to enhance the looks of your car. They are functional.
You are more than welcome to come by my house (in Etobicoke) or garage (Georgetown) and take a look at them before you buy. Check them out thoroughly and ask questions. I want to sell them as a package because the drive and navigator harness/seatbelts are replaced concurrently.
Asking $200 for 2 harness/seatbelts and the 4 pads (2 per harness). OR BEST OFFER No lowballers, tire kickers, ricers or fools please.
Jeff @ 416-233-9920
Pictures for those that don't understand:
Harness Pads. Notice padding on back, not front of pad.
3 point harness/seatbelts. 3 anchor points + 6 adjustment points.
