LT1 high performance stuff, 396 forged shortblock + everything.
#1
LT1 high performance stuff, 396 forged shortblock + everything.
Alright, I am seriously considering selling all this stuff in contemplation of going another (more recent 5th generation)...I mean direction. The history of this stuff is...I bought ALL of this stuff BRAND NEW, never installed ANY of it and got DEPLOYED to Africa. My loss is your gain, I will entertain all REASONABLE offers and will consider a discount if you buy it all.
Everything is in Gulfport, MS. I will be home very soon!
Basically, all of this stuff can be put together to build a SWEET 396 HP easily capeable of 500 + horses...
I am in Africa right now, so I will gauge replies (first come first serve ONLY if I decide to part this stuff out). If I can not sell this stuff as a lot, or get almost all of it sold by parting it out, then I will not sell any of it, and just continue my plan since I am almost done anyway.
I have reciepts for everything, hit me up on an offer for it all!
Buyer must either pick up, or arrange for pickup.
Block: (Asking $1,800)
-396 Stroker
-Fully blueprinted and ballanced (papers will be included)
-Forged Eagle H beam rods
-Scat 4340 Forged Crank
-Forged Pistons
-Only test miles on block (on dyno)
-10.5:1 compression ratio
-Comes with spider for lifter valley
-Comes with Lifter guides
-Comes with Oil Pan
Heads (Asking $1,000)
-Trickflow LT1 Heads
-Fully Assembled
-Combustion chamber volume 62cc
-Intake Volume 195cc
-Exhaust 72cc
-Valves 2.02 Intake, 1.60 Exhaust
Intake (This is a special case here) MAKE OFFER
-Signed in 2 places by Dale Earnhardt Jr.
-Edlebrock Air Gap Intake (Natural Finish)
-Signed by Dale Earnhardt Jr.
-I have pictures of me getting it signed
Valve Covers ($200.00)
-Canton TALL style
-SWEET
Pushrods ($25.00)
-Crane Hardened pushrods
-Stock Length
Lifters ($150.00)
-Hydraullic Roller
-Crane
Rockers ($220.00)
-Comp Pro Mag
-1.7 Ratio
CAM ($125.00)
-Comp Cams XE grind
-236/246
Throttle Body ($300.00)
-BBK 58mm
Spark Plugs ($50.00)
-NGK Iridium X8
Fuel System
-Aeromotive Fuel Pressure Regulator ($120.00)
-LT1 Fuel Rail ($20.00)
-Lucas Bosch 36# injectors ($200.00)
T-56!
-$700.00 (no pedals or anything else, just transmission) Not new
LT1 Accesory Bracket $25.00 Not new
-Chrome
LT1 Fuel Rail ($10.00) Not new
I am sure there is other stuff too, I will include it with the applicable purchases
Flywheel
Bolts kit, LT1
This stuff is DEEPLY discounted from the prices that I paid for it, I just kinda want to go in a different direction with the car scene here, dont low-ball me, I priced this stuff fair enough.
The engine breaks down to around $4,100, I will take $3,600 for it all. If the buyer of the engine wants the transmission, I will sell everything on this page for $4,100. Thats engine and trans and everything else.
Everything is in Gulfport, MS. I will be home very soon!
Basically, all of this stuff can be put together to build a SWEET 396 HP easily capeable of 500 + horses...
I am in Africa right now, so I will gauge replies (first come first serve ONLY if I decide to part this stuff out). If I can not sell this stuff as a lot, or get almost all of it sold by parting it out, then I will not sell any of it, and just continue my plan since I am almost done anyway.
I have reciepts for everything, hit me up on an offer for it all!
Buyer must either pick up, or arrange for pickup.
Block: (Asking $1,800)
-396 Stroker
-Fully blueprinted and ballanced (papers will be included)
-Forged Eagle H beam rods
-Scat 4340 Forged Crank
-Forged Pistons
-Only test miles on block (on dyno)
-10.5:1 compression ratio
-Comes with spider for lifter valley
-Comes with Lifter guides
-Comes with Oil Pan
Heads (Asking $1,000)
-Trickflow LT1 Heads
-Fully Assembled
-Combustion chamber volume 62cc
-Intake Volume 195cc
-Exhaust 72cc
-Valves 2.02 Intake, 1.60 Exhaust
Intake (This is a special case here) MAKE OFFER
-Signed in 2 places by Dale Earnhardt Jr.
-Edlebrock Air Gap Intake (Natural Finish)
-Signed by Dale Earnhardt Jr.
-I have pictures of me getting it signed
Valve Covers ($200.00)
-Canton TALL style
-SWEET
Pushrods ($25.00)
-Crane Hardened pushrods
-Stock Length
Lifters ($150.00)
-Hydraullic Roller
-Crane
Rockers ($220.00)
-Comp Pro Mag
-1.7 Ratio
CAM ($125.00)
-Comp Cams XE grind
-236/246
Throttle Body ($300.00)
-BBK 58mm
Spark Plugs ($50.00)
-NGK Iridium X8
Fuel System
-Aeromotive Fuel Pressure Regulator ($120.00)
-LT1 Fuel Rail ($20.00)
-Lucas Bosch 36# injectors ($200.00)
T-56!
-$700.00 (no pedals or anything else, just transmission) Not new
LT1 Accesory Bracket $25.00 Not new
-Chrome
LT1 Fuel Rail ($10.00) Not new
I am sure there is other stuff too, I will include it with the applicable purchases
Flywheel
Bolts kit, LT1
This stuff is DEEPLY discounted from the prices that I paid for it, I just kinda want to go in a different direction with the car scene here, dont low-ball me, I priced this stuff fair enough.
The engine breaks down to around $4,100, I will take $3,600 for it all. If the buyer of the engine wants the transmission, I will sell everything on this page for $4,100. Thats engine and trans and everything else.
Thread
Thread Starter
Forum
Replies
Last Post
SmokedOutZ28
Car Parts For Sale
0
03-12-2008 10:52 PM
camaro videos
Automotive Pictures & videos
0
01-13-2008 03:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)